Item #1001 376 092 Model #NTSW7300L30BLPC USE AND CARE GUIDE LUMSDEN OUTDOOR LANTERN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this outdoor lantern. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-Installation PLANNING INSTALLATION □□ Turn off the electrical power at your fuse or circuit breaker box before installing or servicing any part of this fixture. □□ Carefully remove the fixture from the carton, and check that all parts are included. Be careful not to misplace any of the screws or parts needed for installing the fixture. TOOLS REQUIRED Safety goggles Pliers Phillips screwdriver Electrical tape Wire cutters Wire strippers HARDWARE INCLUDED NOTE: Hardware shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A B C Part Description Quantity A Gem bar 1 B Backplate 1 C Light fixture 1 4
Installation 1 2 Installing the gem bar □□ Remove the acorn nuts (DD) to separate the gem bar from the fixture. Connecting the wires CAUTION: Make sure the main power is off at the fuse or circuit breaker box. Check the power wires for damage or scrapes. If the power supply wires are within 3 in. of the ballast power supply, use wire suitable for at least 90°C (194°F). Most dwellings built before 1985 have supply wire rated to 60°C. Consult a qualified electrician before installing.
Installation (continued) 3 Mounting the light fixture □□ Align the mounting holes in the backplate (B) with the two studs (CC). □□ Insert the two studs (CC) through the backplate (B), and secure the fixture with the two acorn nuts (DD). □□ After installing the fixture, caulk the upper 2/3rds of the wall plate to the mounting surface. Leave the bottom 1/3rd uncaulked to allow for drainage of any water that might leak into the enclosure. The manufacturer recommends a non-drying exterior caulking material.
Maintenance REPLACING THE LED DRIVER IMPORTANT: Do NOT disassemble product. This operation is only for replacement of a faulty LED Driver. This is NOT a step to be taken with installation of this fixture. IMPORTANT: It is recommended that the replacement of an LED driver be completed by a qualified electrician. CAUTION: Turn off main power at the fuse or circuit breaker box. Disassembly: 1. Use a Phillips screwdriver to remove the (4) screws in the glass shade assembly housing. 2.
Care and Cleaning To clean the fixture, disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Wait a few minutes for the fixture to cool down. □□ Use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the glass and surface of the fixture. □□ Do not use any cleaners with chemicals, solvents or harsh abrasives. I f necessary, use a mild soap to clean off any dirt or stains. Troubleshooting Problem The lights do not come on.
Service Parts MODEL TYPE Part Description Quantity A Glass 1 B Driver and Photocell 1 C LED Array 1 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo #1001 376 092 Modelo #NTSW7300L30BLPC GUÍA DE USO Y MANTENIMIENTO FAROL LUMSDEN PARA EXTERIORES ¿Preguntas, problemas, piezas faltantes? Antes de regresar a la tienda, llame al servicio al cliente de Hampton Bay de lunes a viernes de 8 a.m. a 7 p.m. (hora del este) y los sábados de 9 a.m. a 6 p.m. (hora del este) 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS Agradecemos su confianza en Hampton Bay mediante la compra de este farol para exteriores.
Contenido Información sobre seguridad. . . . . . . . . . . . . . . . . . . . . . . . . . 12 Garantía. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Antes de la instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Planificación de la instalación. . . . . . . . . . . . . . . . . . . . . . . . 13 Herramientas necesarias. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antes de la instalación PLANIFICACIÓN DE LA INSTALACIÓN □□ Desconecte la electricidad en la caja de fusibles o el interruptor de circuito antes de instalar o dar servicio a cualquier pieza de esta lámpara. □□ Retire con cuidado la lámpara de la caja y revise que tenga todas las piezas. Asegúrese de no perder ningún tornillo o cualquier otra pieza necesaria para la instalación.
Antes de la instalación (continuación) CONTENIDO DEL PAQUETE A B C Pieza Descripción Cantidad A Barra de soporte 1 B Placa posterior 1 C Lámpara 1 14
Instalación 1 Instalación de la barra de soporte □□ Retire todas las tuercas ciegas (DD) para separar la barra de soporte de la lámpara. 2 Conexión de los alambres PRECAUCIÓN: Asegúrese de desconectar la electricidad en la caja de fusibles o el interruptor del circuito. Revise los alambres para detectar posibles daños o rayaduras. Si los alambres de la fuente están a menos de 3 pulg. (7,62 cm) de la fuente del balastro, use alambres apropiados para un mínimo de 90°C (194°F).
Instalación (continuación) 3 Montaje de la lámpara □□ Alinee los orificios de montaje en la placa posterior (B) con los dos pasadores (CC). □□ Inserte los dos pasadores (CC) a través de la placa posterior (B) y fije la lámpara con las dos tuercas ciegas (DD). □□ Después de instalar la lámpara, aplique calafateo a 2/3 del borde alrededor de la placa de pared en contacto con la superficie de montaje.
Mantenimiento REEMPLAZO DEL CONTROLADOR DE LED IMPORTANTE: NO desarme el producto. Esta operación es solo para el reemplazo de un controlador de LED defectuoso. Este paso NO es necesario durante la instalación de esta lámpara. Fotocelda IMPORTANTE: Se recomienda que el reemplazo del controlador de LED sea realizado por un electricista calificado. PRECAUCIÓN: Desconecte la electricidad en la caja de fusibles o el interruptor de circuito. Conector flexible Estructura Para desarmarla: 1.
Cuidado y limpieza Para limpiar la lámpara, desconecte la electricidad a la lámpara apagando el interruptor de circuito o retirando el fusible en la caja de fusibles. Espere unos minutos hasta que la lámpara se enfríe. □□ Use un paño limpio seco o ligeramente húmedo (use agua limpia, no use solventes jamás) para limpiar el vidrio y la superficie de la lámpara. □□ No use ningún limpiador con productos químicos, solventes ni abrasivos.
Piezas de recambio TIPO DE MODELO Pieza Descripción Cantidad A Vidrio 1 B Controlador y fotocelda 1 C Matriz de LED 1 19 HAMPTONBAY.COM Para recibir ayuda adicional, llame por favor al 1-855-HD-HAMPTON.
¿Preguntas, problemas, piezas faltantes? Antes de regresar a la tienda, llame al servicio al cliente de Hampton Bay de lunes a viernes de 8 a.m. a 7 p.m. (hora del este) y los sábados de 9 a.m. a 6 p.m. (hora del este) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para su uso en un futuro.