Instructions / Assembly

SCREEN ROOM SET UP INSTRUCTIONS
Screen panels come zipped together. For easier attachment, unzip the four panels before starting.
STEP 1
Wrap the first toggle around the top frame
truss by sliding the plastic pin through the
small loop.
Start the first panel IN THE MIDDLE of one
side of the frame. Roll the corner of the
canopy fabric up for easier attachment.
(Canopy not shown here for clarity.)
STEP 2
Wrap the screen
panel around the
outside of the frame
leg and attach the
corner toggle just
above the slider.
TIP:Roll the fabric
corner of the top
canopy up for
easier attaching.
Attach the remaining
toggles, then repeat
the process for the
other three screen
panels.
STEP 3
TIE-BACK OPTION
In order to tie back the screen panels to create curtains:
•Attach an end of screen panel at the intersection of the
first set of trusses.
•Wrap the panel around the leg and attach at the
perpendicular truss.
•Wrap back around the leg and attach the panel to the
original truss.
•Use the straps to tie back the curtain.
Note: The pictures below illustrate how to attach the screen panels.
Y
our actual product may differ from the one shown here.
Model# N121
To access spare parts, please call toll free 1-888-502-9589,
Monday - Friday, 9:00 AM - 4:00 PM PST;
or visit www.crown-shades.com;or email [e-mail]
Please remove or tie up the screen
panels during windy days !
WARNING: