Installation Guide

ManualsBrandsHampton Bay ManualsLandscape Flood LightsLow Voltage Black LED Landscape Flood Light with Hubspace App Control

Item #1007 891 726

Model #L08157

Use and Care Guide

PACKAGE CONTENTS

Assembly and Installation

Attaching and installing the light

CAUTION: The wire from the low-voltage power unit shall be 12-18 AWG type

underground low energy circuit cable or SPT2W.

IMPORTANT:

•

building structure such as a house or deck.

• The landscape wire and connector can also be hidden under stone or buried

.)mc 42.51( .ni 6 fo htped mumixam a ta ssarg rednu

•

WARNING: Risk of Electric Shock. Install all luminaires 10 ft. (3.05 m) or more

from a pool, spa or fountain.

Only for use with low voltage power units with a maximum output rating of 12V,

.yradnoces rep W003

For landscape lighting systems only. Outdoor use only. The device is accepted

as a component of a landscape lighting system where the suitability of the

combination shall be determined by CSA or local inspection authorities

having jurisdiction.

ETL listed under model # L08157.

Please read and save these instructions

Part Description Quantity

Light

B 1

C 1

Steel Support

Spike

Screws

E 3

F 1

Connectors

G 2

Adjustment screw

Expands

Attach spike (B) and light (A) together by turning them

Loosen the adjustment screw(G) by turning it conterclockwise.

Adjust the head to the desired angle. Re-tighten the adjustment

screw (G) when ﬁnished.

Carefully remove the ﬁxture from its protective packaging.

WARNING: Never push the ﬁxture into the ground by the light (A) or use a

hammer to insert the spike (B) into the ground.

counterclockwise.

CAUTION: Safe for outdoor operation.

Connecting the wires

WARNING: The wire connector (F) contacts have sharp edges for piercing the

main low-voltage cable. To avoid injury, do not touch the metal contacts.

WARNING

or bulb protector.

WARNING: Install in accordance with all local codes and ordinances.

IMPORTANT SAFETY INSTRUCTIONS

Press the top half of the connector into the bottom half until it clicks into

place and is secure. This will pierce the low voltage wire and connect

the light to the transformer.

Align the low-voltage wire and ﬁt it into the connector bottom half as sh-

own below.

Test the connection by plugging in the transformer to see if the light tu-

rns on. If it does, unplug the transformer and continue the installation. If

it does not, unplug the transformer and check the connection between

the transformer and low-voltage wire, reinstall the connector, and ensure

power is available to the outlet you are using.

Once the connection is secure, repeat the process for the remaining lights.

Once all lights are connected, it is recommended to wrap each connector

with electrical tape for additional protection.

After all ﬁxtures are installed, turn on the transformer by plugging it into

an outlet.

CAUTION: Be careful ! The wire stabs are very sharp!

LV LED SMART FLOOD LIGHT

Note: If you want to install this with your existing low-voltage lighting system,

plug the lights into your existing 18AWG to 12AWG SPT-2W wiring.

Summary of content (4 pages)

PAGE 1
Item #1007 891 726 Model #L08157 Use and Care Guide LV LED SMART FLOOD LIGHT Please read and save these instructions PACKAGE CONTENTS Part B A G F C E D Description Quantity A Light 1 B Spike 1 C Steel Support 1 D Screws 3 E Expands 3 F Connectors 1 G Adjustment screw 2 Assembly and Installation IMPORTANT SAFETY INSTRUCTIONS WARNING: Risk of Electric Shock. Install all luminaires 10 ft. (3.05 m) or more from a pool, spa or fountain. CAUTION: Safe for outdoor operation.
PAGE 2
Controlling the Light with Bluetooth® wireless technology and Wi-Fi® network 1 Download the Hubspace app TM Download the Hubspace app from the device’s App Store or the Google Play Store to your mobile device. Turn on the Bluetooth®and Wi-Fi ® functions of the smart device to ensure the Wi-Fi ® signal at home is stable and reliable. Open the Hubspace app. NOTICE: To register, enter your email address and a password. Or, login if you already have an account.
PAGE 3
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture. Clean the fixture with a soft, dry cloth. Do not use cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture. Minor problems often can be fixed without the help of an electrician. Problem The fixture will not light. The fuse blows or the circuit breaker trips when the light is turned on.
PAGE 4
Problem Possible Cause Solution My device is in a location that does not have Wi-Fi. Can I still use it with the Hubspace app? Hubspace device use question. Look for it where other stickers are on the product. A copy of the QR code is also included in your device’s documentation. Under the QR code are numbers. You can enter those in manually instead of scanning the code. I cannot find the QR code. The QR code has become damaged.