Item #1003 535 856 Model #L-DNC1418PST-A USE AND CARE GUIDE FLINTRIDGE METAL GLIDER Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this Glider. We strive to continually create quality products designed to enhance your home.
Table of Contents Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 .5 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . .
Pre-Installation PLANNING INSTALLATION Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC GG FF EE HH DD II JJ AA Bolt M6*15 BB Bolt M6*30 CC Bolt M6*40 DD EE FF GG Hex wrench HH II JJ 3 HAMPTONBAY.
Pre-Installation (continued) PACKAGE CONTENTS B2 B1 A D1 D2 ( ) ( ) ( ) ( ) E 4 C F
Installation 1 2 Connecting the Back and Handrail Connecting the Handrail and Seat Connect the Handrail (B1&B2) with the Seat Insert a space (C) using the bolts (BB), spring washers (DD) and flat washers (EE) with the hex wrench (GG). Do not tighten the bolts. Attach the Handrail (B1&B2) to the Back (A) using the bolts (CC), spring washers (DD) and flat washers (EE) with the hex wrench (GG). Do not tighten the bolts. DANGER: To avoid destroying the finish, do not put the parts on the ground directly.
Installation (continued) 5 Connecting the Leg and Connect bar 6 Connecting the Glide bar and Leg Connect the Glider bar (E) with the Legs (D1&D2) using the bolts (BB), spring flat washers (EE) and plastic washer (FF) with the hex wrench (GG). Tighten all the bolts using wrench (GG). Attach the Legs (D1&D2) to the Connect bar (F) using the bolts (AA), spring washers (DD) and flat washers (EE) with the hex wrench (GG). Do not tighten the bolts.
Care and Cleaning □ Before using, clean the glider completely with a soft dry towel. □ Do not put your glider in wet conditions where there is a risk of rust developing. □ When not in use, store in a cool, dry area.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.