Item# 1003 535 856 1003 421 786 Model# L-DNC1418PST-A USE AND CARE GUIDE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this Glider. We strive to continually create quality products designed to enhance your home.
Table of Contents 3 3 3 4 5 7 2 2 2 2 2 Important Safety Instructions READ ALL INSTRUCTIONS BEFORE USE To reduce the risk of injury to persons: DANGER: Keep children and parts away from the assembly area. 1. Close supervision is necessary when this furnishing is used by, or near children, or disabled persons. 2. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
Pre-Assembly PLANNING INSTALLATION Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC GG FF EE HH DD II JJ AA Bolt M6*15 BB Bolt M6*30 CC Bolt M6*40 DD Spring Washer Outer diameter9*Inner diameter6.
Pre-Assembly (continued) PACKAGE CONTENTS B2 B1 A D1 D2 E C F Back Handrail（Left） Handrail（Right） Seat Leg（Left） Leg（Right） Glide bar Connect bar 4 HAMPTONBAY.COM. Please contact 1-855-HD-HAMPTON for further assistance.
Assembly 1 2 Connecting the Back and Handrail Attach the Handrail (B1&B2) to the Back (A) using the bolts (CC), spring washers (DD) and flat washers (EE) with the hex wrench (GG). Do not tighten the bolts. DANGER: To avoid destroying the finish, do not put the parts on the ground directly. Connecting the Handrail and Seat Connect the Handrail (B1&B2) with the Seat Insert a space (C) using the bolts (BB), spring washers (DD) and flat washers (EE) with the hex wrench (GG). Do not tighten the bolts.
Assembly (continued) 5 Attaching the Legs 6 Connecting the Glide bar and Leg Attach the Legs (D1&D2) to the Connect bar (F) using the bolts (AA), spring washers (DD) and flat washers (EE) with the hex wrench (GG). Do not tighten the bolts. DANGER: To avoid destroying the finish, do not put the parts on the ground directly. Connect the Glider bar (E) with the Legs (D1&D2) using the bolts (BB), flat washers (EE) and plastic washer (FF) with the hex wrench (GG).
Care and Cleaning Before using, clean the glider completely with a soft dry towel. Do not put your glider in wet conditions where there is a risk of rust developing. When not in use, store in a cool, dry area. 7 HAMPTONBAY.COM. Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
