Instructions / Assembly

DECORATIVE END PANEL

ASSEMBLY & INSTALLATION INSTRUCTIONS

U180621/0718

KAEP1230

1530

1830

1236

1242

2430

Model Number(s):

ALIGN PANEL — Panel should align at the top and bottom

with the door on the front of the cabinet. Panel can be

secured temporarily with a clamps.

SECURE TO CABINET — Pre-drill through the cabinet into

the back of the door. If the door has a wood frame (Hampton,

Shaker), take care to drill into the door frame and not the

center panel. Use #8 x ¾" screws to secure the door to the

cabinet side.

If a flush-fit panel has been installed to the cabinet previously,

1" screws will be required.