Item #1002 957 046 Model # IKE2001L USE AND CARE GUIDE LED EXTERIOR / INTERIOR FLUSHMOUNT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this flushmount. We strive to continually create quality products designed to enhance your home.
Table of Contents Tools Required ................................ 3 Hardware Included .......................... 3 Package Contents ........................... 4 Installation ........................................... 5 Care and Cleaning ............................... 7 Troubleshooting .................................. 7 Table of Contents ................................. 2 Safety Information ................................ 2 Warranty ............................................... 2 What is Covered ..
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase.
Pre-Installation (continued) PACKAGE CONTENTS CAUTION: The canopy (A) is one piece. Do not disassemble it.
Installation 1 □ □ □ □ Attaching the mounting strap to the outlet box Screw the hex nut (FF) about 1 in. onto the nipple (EE). Screw the nipple (EE) about 1/2 in. into the mounting strap (AA). Tighten the hex nut (FF) against the mounting strap (AA) to secure the nipple (EE). Mount the mounting strap (AA) to the outlet box (not included) using the outlet box screws (DD).
Installation (continued) the fixture to the 3 Securing 4 outlet box □ CAUTION: The canopy (A) is one piece. Do not disassemble it. □ □ □ Align the nipple (EE) to protrude through the hole in the center of the canopy (A). Place the canopy (A) firmly against the ceiling. Screw the cap nut (GG) onto the nipple (EE). 6 □ □ Securing the shade Align the three slots on the shade (B) with the three divots located inside the canopy (A). Carefully turn the shade (B) clockwise until it locks into the canopy (A).
Care and Cleaning □ □ Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents or hash abrasives. CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Troubleshooting Problem Possible Cause The fixture will not light. The power is off. The fuse blows or circuit breaker trips when the light is turned on. Solution Ensure the power supply is On.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo # 1002 957 046 Modelo # IKE2001L U GUÍA DE USO Y MANTENIMIENTO EXTERIOR / INTERIOR LED DE EMPOTRAR Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA Agradecemos la confianza que ha tenido en Hampton Bay a traves de de la compra de este de empotrar.
Índice Índice .................................................. 10 Información de Seguridad ................. 10 Garantía .............................................. 10 Lo que esta Cubierto ...................... 10 Lo que (no) esta Cubierto ............... 10 Pre-Instalación ................................... 11 Planificación de la Instalatión ......... 11 Herraminentas Necesarias .............11 Requiere de Hardware ...................11 Contenido del Paquete ...................12 Instalación ......
Pre-Instalación PLANIFICACIÓN DE LA INSTALLATIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE PRECAUCIÓN: El dosel (A) es una sola pieza. No la desarme.
Instalación 1 Acoplar la correa de montaje a la caja de salida 2 □ Apriete la tuerca hexagonal (FF) como una pulgada dentro de la boquilla (EE). Atornille la boquilla (EE) como media pulgada dentro de la correa de montaje (AA). Apriete la tuerca hexagonal (FF) contra la correa de montaje (AA) para asegurar la boquilla (EE). Coloque la correa de montaje (AA) en la caja de salida (no includio) usando los tornillos de la caja de salida (DD).
Instalación (continuación) el instalación a la 3 Asegurar 4 caja de salida □ PRECAUCIÓN: El dosel (A) es una sola pieza. No la desarme. □ □ □ □ Alinee la boquilla (EE) para que sobresalga pro el orificio en el dosel (A). Coloque el dosel (A) firmemente contra el cielo raso. Atornille la tuerca de sombrerete (GG) en la boquilla (EE). □ 14 Asegurar la pantalla At aliñe los tres espacios en la pantalla (B) con las tres marcas situado en el interior del dosel (A).
Mantenimiento y Limpieza □ □ Limpia la lámpara con un paño suave y seco. No uses limpiadores con químicos, solvents, o productos abrasivos. PRECAUCIÓN: Antes de intentar limpiar la pieza, desconéctela o apague el interruptor o remueva el fusible de la caja de fusibles. Solución de Problemas Problema Causa Posible El accesorio no iluminará. La electricidad está apagada. Asegúrate de que el suministro de electricidad esté encendido. El cortacircuito está apagado.
Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay de Lunes a Viernes entre 8 a.m. y 7 p.m.,,El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.
Article #1002 957 046 Modèle # IKE2001L GUIDE D'UTILISATION ET D'ENTRETIEN LUMIÈRE LED PLAFONNIER INTERIEUR/EXTÉRIEUR Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Hampton Bay entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-855-HD-HAMPTON HAMPTONBAY.COM MERCI Nous vous remercions de la confiance que vous avez place en Hampton Bay en achetant ce plafornnier.
Table des Matières Outils Requis ..................................19 Materiel Requis ..............................19 Contenu de l'Emballag....................20 Installation ..........................................21 Entretien et Nettoyage........................23 Dépannage ..........................................23 Table des Matières ............................. 18 Consignes de Sécurité ....................... 18 Garantie .............................................. 18 Ce qui est Cuvert.........
Pré-Installation PLANIFICATION DE L'INSTALLATION Lisez toutes les instructions avant de procéder à l’assemblage. Avant de commencer à installer ce luminaire ou d’enlever l’ancien luminaire, déconnectez le courant en eteignant le disjoncteur ou en enlevant le fusible correspondent du coffret à fusibles. Pour éviter d’endommager ce produit, assemblez-le sur une surface molle et non abrasive telle qu’un tapis ou un carton. REMARQUE: Conservez le reçu, ainsi que ces instructions, à titre de preuve d’achat.
Pré-Installation (suite) CONTENU DE L'EMBALLAG ATTENTION: Le pavilion (A) est d’une pièce. Ne pas le désassembler.
Installation 1 □ □ □ □ Attacher la sangle de montage à la boîte de sortie Visser l’écrou hexagonal (FF) d’environ un pouce sur l’embout (EE). Visser l’embout (EE) d’environ un demi pouce sur la sangle de montage (AA). Serrer l’écrou hexagonal (FF) sur la sangle de montage (AA) pour sécuriser l’embout (EE). Monter la sangle de montage (AA) sur la boîte de sortie grâce aux vis de la boîte de sortie (DD).
Installation (suite) le luminaire sur la 3 Fixer boîte de sortie 4 □ ATTENTION: Le pavilion (A) est d’une pièce. Ne pas le désassembler. □ □ □ Aligner l’embout (EE) afin qu’il ressorte par le trou situé dans le centre du pavillon (A). Placer le pavillon (A) fermement contre le plafond. Visser l'écrou de capuchon (GG) sur l'embout (EE). 22 □ □ Fixer le abat-jour Alignez les trois fentes sur l’abat-jour (B) à l’aide des trois mottes situé à l'intérieur de la pavillon (A).
Entretien et Nettoyage □ □ Nettoyez la lampe avec un linge doux, sec. N'utilisez jamais de nettoyant contenant des produits chimiques, des solvants ou des abrasifs. AVERTISSEMENT: Débrancher l’alimentation électrique avant de nettoyer le luminaire en enlevant les fusibles concernés ou en désactivant le disjoncteur. Dépannage Problème Cause possible Le luminaire ne s'allume pas. Le courant est coupé. Assurez-vous que la source de courant électrique est sous tension. Le disjoncteur est déclenché.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Hampton Bay entre 8h00 et 19h00 (HNE) du Lundi au Vendredi, entre 9h00 et 18h00 (HNE) du Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conservez ce guide pour un usage ultérieur.