Item # 1006 320 963 / 1006 323 840 / 1006 323 838 / 1006 323 845 Model # HD4969C / HD4969C1 / HD4969C2 / HD4969C3 USE AND CARE GUIDE 3-LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU we appreciate the trust and confidence you have placed in hampton bay through the purchase of this pendant.
Table of Contents Table of Contents ........................................................... 2 Safety Information ......................................................... 2 Warranty ......................................................................... 2 Three (3) Year Warranty ............................................................. 2 What is Covered ....................................................................... 2 What is Not Covered ....................................................
Pre-Installation PLANNING INSTALLATION □ Read all the instructions before installing. □ To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-855-HD-HAMPTON.
Pre-Installation (continued) PACKAGE CONTENTS A B C Part Description Quantity A Fixture body 1 B Shade 3 C Lock screw + 2 replacements 4 9+2
Installation 1 Installing the crossbar assembly □ 2 Secure the crossbar assembly (AA) to the outlet box (not included) with the outlet box screws (BB). Tighten until snug. Test fitting the ceiling canopy to the crossbar assembly □ Remove the lock ball (1) and the hex nut (2) from the crossbar assembly (AA). □ Fit the ceiling canopy on the fixture body (A) over the nipple on the crossbar assembly (AA) and secure with the lock ball (1).
Installation (continued) 4 □ □ Making the electrical connections * Use wire connectors (CC) to connect the wires. Ground Wire: 1. Wrap the supply ground wire around the green ground screw on the crossbar assembly (AA), no less than 2 in. from the end of the wire. Tighten the ground screw. 2. Connect the fixture ground wire to the supply ground wire with a wire connector (CC). Supply Wire: 1. Connect the supply white wire to the white fixture supply wire with a wire connector (CC). 2.
Care and Cleaning □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. □ To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. The power is off. There is a faulty switch.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Articulo # 1006 320 963 / 1006 323 840 / 1006 323 838 / 1006 323 845 Modelo # HHD4969C / D4969C1 / HD4969C2 / HD4969C3 GUÍA DE USO Y MANTENIMIENTO LÁMPARA COLGANTE DE 3 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA.
ÍNDICE Índice............................................................................... 2 Información de seguridad.............................................. 2 Garantía........................................................................... 2 Tres (3) años de garantía............................................................. 2 Lo que está cubierto.................................................................... 2 ¿Qué no está cubierto?........................................................
Antes de la instalación Planificación de la instalación □ Lea todas las instrucciones antes de realizar la instalación. □ Coloque este producto sobre una superficie suave y no abrasiva, como una alfombra o una base de cartón, para evitar dañarlo. IMPORTANTE : Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspende el ensamblaje.
Antes de la instalación (continuación) CONTENIDO DEL PAQUETE A B C Pieza Descripción Cantidad A Cuerpo de la lámpara 1 B Pantalla 3 C Tornillo de fijación + 2 repuesto 4 9+2
Instalación de instalación de la base del 2 Prueba techo en el soporte de barras cruzadas del soporte de barras 1 Instalación cruzadas □ □ Fije la ensamble de la barra transversal (AA) a la caja de salida (no incluida) con los tornillos para la caja de salida (BB). Apriete hasta que esté ajustado. □ Nota: Los manguitos roscados de montaje preensamblados en la barra transversal deben sobresalir. AA BB Retire el fiador de bola (1) y la tuerca hexagonal (2) del soporte del travesaño (AA).
Instalación (continuación) 4 Realizar las conexiones eléctricas AA * Use los conectores ce cables (CC) para conectar los cables. Conductor de puesta a tierra: 1, Coloque el conductor de tierra alrededor del tornillo verde de puesta a tierra en el ensamble de la barra transversal (AA), a no menos de 5,08 cm del extremo del conductor. Apriete el tornillo de puesta a tierra. 2, Conecte el conductor de tierra de la lámpara al conductor de tierra usando el conector de cables (CC).
Cuidado y limpieza □ No use limpiadores que contengan agentes químicos, solventes o abrasivos fuertes. Use solo un paño suave y seco para desempolvar o limpiar cuidadosamente el producto. □ Para limpiar la lámpara, desconecte la alimentación apagando el interruptor de circuito o retirando el fusible de la caja de fusibles y use un paño limpio seco o levemente húmedo para la superficie exterior de la lámpara.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.