Model HB7094-43 HB7095-43 HB7096-43 SKU# 1007 359 909 1007 359 922 1007 359 917 USE AND CARE GUIDE EXTERIOR INCANDESCENT WALL LANTERN AUTUMNHILL Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this exterior incandescent wall lantern.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Required Hardware Included Package Contents 2 2 2 3 3 3 3 4 Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 5 7 7 7 7 7 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-installation (continued) PACKAGE CONTENTS A B C Part Description Quantity A Fixture Handle 1 B Glass Panels 3 C Fixture 1 4
Installation 1 Mounting the hardware HH BB Secure the mounting plate (HH) to the outlet box using the mounting screws (BB). AA 2 Connecting the wires B Connect the black supply wire to the black fixture wire using a wire nut (DD). HH Connect the white supply wire to the white fixture wire using a wire nut (DD). Connect the fixture ground wire to the supply ground wire using a wire nut (DD). Wrap all wire connections with electrical tape for a more secure connection.
Installation (continued) 3 A Assembling the fixture FF Align and secure the fixture base (B) against the mounting plate (HH) by fastening two of the decorative nuts (FF) to the fixture screws (AA). EE Secure fixture handle (A) onto top of fixture base (B) using cage screws (GG) and the remaining two decorative nuts (FF). Insert glass panels (C) into fixture base (B) by bending metal tabs out. Secure glass panels (C) by bending metal tabs inwards.
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture. INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Modelo HB7094-43 HB7095-43 HB7096-43 SKU# 1007 359 909 1007 359 922 1007 359 917 GUÍA DE USO Y MANTENIMIENTO LINTERNA DE PARED INCANDESCENTE EXTERIOR AUTUMNHILL Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Necesarias Ferretería Incluida Contenido del Paquete 12 12 12 11 11 11 11 12 Instalación Operación Cuidado y Limpieza Mantenimiento del Exterior Mantenimiento del Interior Solución de Problemas 13 15 15 15 15 15 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyu
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-instalación (continuado) CONTENIDO DEL PAQUETE A B C Parte Descripción Cantidad A Manija del Luminario 1 B Paneles de Vidrio 3 C Luminario 1 12
Instalación 1 Montaje de la ferreteria HH BB Monte el soporte de montaje (EE) en la caja de salida utilizando los tornillos de montaje (BB). AA 2 Conectando los cables B Conecte el cable de suministro negro al cable del accesorio negro con una tuerca para cable (CC). HH Conecte el cable de suministro blanco al cable del accesorio blanco con una tuerca para cable (CC). Conecte el cable de tierra del dispositivo al cable de tierra de suministro usando una tuerca para cable (CC).
Instalación (continuado) A 3 Assemblage del luminario Alinee y asegure la base del accesorio (B) contra la placa de montaje (HH) fijando dos de las tuercas decorativas (FF) a los tornillos del accesorio (AA). FF EE Asegure la manija del accesorio (A) en la parte superior de la base del accesorio (B) usando tornillos de jaula (GG) y las dos tuercas decorativas restantes (FF). GG Inserte los paneles de vidrio (C) en la base del accesorio (B) doblando las lengüetas de metal hacia afuera.
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay 8 a.m. – 7 p.m Hora del Este, Lunes – Viernes, 9 a.m. – 6 p.m., Hora del Este, Sábado 1-855-HD-HAMPTON HAMPTONBAY.COM Conserve este manual para futuras consultas.
Modèle HB7094-43 HB7095-43 HB7096-43 SKU# 1007 359 909 1007 359 922 1007 359 917 GUIDE D'UTILISATION ET D'ENTRETIEN LANTERNE MURALE INCANDESCENTE D'EXTERIEUR AUTUMNHILL Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Requis Matériel Inclus Contenu du Paquet 18 18 18 19 19 19 19 20 Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 21 23 23 23 23 23 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la p
Pré-installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE : Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-installation (suite) CONTENU DU PAQUET A B C Partie Description Quantité A Poignée du pavillon 1 B Panneaux de verre 3 C Pavillon 1 20
Installation 1 Montage du Matériel Montez le support de montage (EE) sur la boîte de sortie à l'aide des vis de montage (BB). HH BB AA 2 Branchement des Câbles B Connectez le fil d'alimentation noir au fil accessoire noir à l'aide d'un serre-fils (CC). HH Connectez le fil d'alimentation blanc au fil accessoire blanc à l'aide d'un serre-fils (CC). Connectez le fil de terre de l'appareil au fil de terre d'alimentation à l'aide d'un serre-fils (CC).
Installation (continué) A 3 Assemblage d'éclairage FF Alignez et fixez la base d'accessoires (B) contre la plaque de montage (HH) en fixant deux des écrous décoratifs (FF) aux vis d'accessoires (AA). EE Fixez la poignée de fixation (A) au sommet de la base de fixation (B) à l'aide des vis à cage (GG) et des deux écrous décoratifs restants (FF). GG Insérez les panneaux de verre (C) dans la base du luminaire (B) en pliant les languettes métalliques vers l'extérieur.
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE : N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Hampton Bay Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi, 9:00 – 18:00, HNE, Samedi 1-855-HD-HAMPTON HAMPTONBAY.COM Conserver ce manuel pour un utilisation ultérieure.