Instructions / Assembly

CLEANING AND MAINTENANCE
1. To clean, use a soft, dry cloth only.
2. Do not use chemical or abrasivecleaners.
--
--
--
--
When using an electrical furnishing basic precautions
should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER -to reduce the risk of electric shock:
Always unplug this furnishing from the electrical outlet
before cleaning.
WARNING -to reduce the risk of bums, fire, electric
shock, or injury to person.
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is
used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as
described in these instructions. Do not use attachments
not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord
or plug , if it is not working properly. If it has been dropped
or damaged, or dropped into water, return the furnishing
to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are
being used or where oxygen is being administered.
8. To disconnect, turn all controls to the off position, then
remove plug from outlet.
9. Always unplug the appliance from the electrical supply
outlet when not in use.
10.This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interfe
rence will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV
technician for help.
Opration indication:
1. Insert the plug end of the adapter into any
standard 100V-240V outlet.
2. Use the cord switch to turn lamp on.
The lamp will show the different color by sliding
mode, keep the currently color when pressing down
the light switch.
Model # 19237-000
Item # 1000053212
PACKAGE CONTENTS
1. Adapter 1
2. LED globe ball 1
Read and Save:
IMPORTANT SAFETY INSTRUCTIONS
LED Globe Ball
Light Switch
Cord Switch