Item # 000 000 000 Model # GFS00744A USE AND CARE GUIDE 10x10 Ft. DECO GAZEBO Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality products designed to enhance your home.
Table of Contents Pre-Assembly ................................................................ 3 Planning Assembly .................................................................. 3 Hardware Included.................................................................... 3 Package Contents................................................................... 4 Assembly........................................................................ 5 Care and Cleaning.....................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB EE CC DD FF Part Description Quantity AA M6x15 bolt 16+1 BB M6x30 bolt 16+1 CC M6x35 bolt 4+1 DD Washer EE FF Ground spike Hex wrench 32+1 12+1 2 3 HOMEDEPOT.
Pre-Assembly (continued) PACKAGE CONTENTS J M K 4 PCS D D D F E D D I H A C G C F D G I G H A A B B B B Part Description Quantity A Beam 4 B Panel C Track tube 4 4 D Canopy spoke 8 E Canopy hub 1 F G H Corner connector – 1 Corner connector – 2 Track tube connector 4 4 8 I Plastic washer 4 J Small fabric cover 1 K Large fabric cover 1 L Q-shape plastic ring 40 M Netting 4 4 F
l Assembly 1 Opening the panels Open the four panels (B). B B 5 HOMEDEPOT.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 2 Secure the corner connectors Secure the corner connector - 1 (F) and the corner connector - 2 (G) to the top corners of the panel (B) using M6x15 bolts (AA) and washers (DD). Repeat this step for the other corner connectors. NOTE: Fully tighten all bolts using the hex wrench (II).
l (continued) Assembly 3 Attaching the track tubes Insert the track tube (C) into the track tube connector (H), and secure the assembled part to the beam (A) using M6x30 bolts (BB) and washers (DD). Insert an M6x35 bolt (CC) through the track tube (C), the plastic washer (I), and secure to the beam (A) using hex wrench (FF). Repeat this step for the other track tubes. H I C H A I A A BB DD C C H CC 7 HOMEDEPOT.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 4 Connecting the panels and the beams Insert the beam (A) into the panel (B). Secure the beam (A) and the panel (B) using an M6x30 bolt (BB) and washer (DD). Repeat above step for the other panels and the beams. NOTE 1: Place the Track tubes (C) toward the inside to assemble the netting correctly.bled. NOTE 2: More than 2 persons are required to assemble this step.
l (continued) Assembly 5 Attaching the canopy spokes to the canopy hub and the beams Insert the long tube of the canopy spokes (D) into the canopy hub (E). Insert another side of the long tube of the canopy spokes (D) into the corner connectors (F&G), as shown below. D D D D E D D E D D D D D D D D D F D G 9 HOMEDEPOT.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 6 Attaching the large fabric cover Place the large fabric cover (K) onto the assembled frame. NOTE: Do not fully extend the fabric cover.
l (continued) Assembly 7 Attaching the small fabric cover Place the small fabric cover (J) and secure each corner by fully extending the fabric to the assembled short tubes of the canopy spokes (D). J D J 11 HOMEDEPOT.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 8 Tying the large fabric cover to the beams and the panels Fully extend the large fabric cover (K) and tie it to the beams (A) and the panels (B) by affixing the Velcro (1).
l (continued) Assembly 9 Hanging the netting and securing the panels to the ground Hang the netting (M) to the panels (B) and the track tubes (C) by using the Q-shape plastic rings (L). Secure the panels (B) to the ground using the ground spikes (EE). Ensure the ground spikes are totally grounded and all the connections are secure before use. B L L C 1 2 M M M B M M EE EE EE 3 Care and Cleaning For best results, clean the gazebo with a damp cloth and dry thoroughly.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HOMEDEPOT.COM Retain this manual for future use.
