Item #1006 615 794 Model #GFM30005A USE AND CARE GUIDE LORSTON 9.8 FT X 9.8 FT GAZEBO Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality products designed to enhance your home.
Table of Contents Pre-Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Care and Cleaning . . . .
Warranty 2 YEAR FRAME AND 2 YEAR FABRIC WARRANTY WHAT IS COVERED We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year warranty for the fabric. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
Pre-Assembly (continued) PACKAGE CONTENTS Quantity Part 4 N Incline Outer Metal Part 4 4 N1 Border Tube Outer Metal Part O Top Frame Plug 4 O1 Top Frame Tube 4 P P1 Metal Plate 2 Metal Plate 3 4 4 Q Metal Plate 4 4 Q1 R R1 Metal Plate 5 Metal Plate 6 4 4 T Metal Plate 7 Cover Plate 4 4 U Top Corner Incline Tube 4 Corner Fitting 4 4 V Top Border Tube 4 Middle Fitting 4 W Metal Plate 1 4 L Corner Incline Tube 4 X L1 Middle Incline Combination Set 4 Top Cover Pl
Assembly 1 Attaching the Post Base Cap and the Post Base Plate to the Post Attach the post base cap (B1) and the post base plate (B) to the posts (A) using M6x15 Combination Bolts (AA). Repeat this step for the other three posts (A) Fully tighten the bolts using the hex wrench (OO). A B1 B A STEP 1 X4 A B1 B AA STEP 2 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 2 Attaching the Long Beam 1 and Long Beam 2 to the Beam Lining and the Beam Decorator Attach the long beam 1 (C) and long beam 2 (C1) to the beam lining (D1). Attach the long beam 1 (C) and long beam 2 (C1) to the beam decorator (D) using M6x75 Combination Bolts (EE) and M6 nuts (HH). Repeat this step for the other three long beams. Do not fully tighten all the bolts at this step.
Assembly (continued) 3 Attaching the Assembled Long Beam to the Post Attach the assembled long beam (C&C1) to the two posts (A) using M6X40 combination bolts (CC). Repeat this step for the other two posts (A). ully tighten all the bolts at this step. A C1 CC C C1 X2 A A C A CC 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 4 Connecting the Assembled Long Beam to the Assembled Post Attach the assembled long beam (C&C1) to the assembled posts (A) using M6X40 combination bolts (CC) as shown below. ully tighten all the bolts at this step.
Assembly (continued) 5 Attaching the Support Bar to the Beam and the Post Attach the support bars (E) to the posts (A) using M6x15 combination bolts (AA). Attach the support bars (E) to the long beam 1 (C) and long beam2 (C1) using M6x15 combination bolts (AA). ully tighten all the bolts at this step. E C&C1 E A AA E AA STEP 2 STEP 1 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 6 Attaching the Corner Fitting to the Corner Incline Tube, Attaching the Middle Fitting to the Middle Incline Combination Set Fix the dia.7x41 Stud (FF) to the corner incline tube (L) and the middle incline combination set (L1). ully tighten all the bolts at this step.
Assembly (continued) 7 Attaching the Corner Incline Tube to the Post and the Top Frame Tube tting (K). Insert the top frame plug (O) to the corner incline tube (L) and the top frame tube (O1) as shown below. ully tighten all the bolts at this step. O1 L O O1 L L O K K O1 O O1 O1 O O1 O L L K K AA L K A 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 8 Attaching the Middle Incline Combination Set to the Top Frame Tube and the Beam Insert the middle incline combination set (L1) into the top frame tube (O1) as shown . Attach the middle incline combination set (L1) to the corner incline tube(L) using the M6x15 Combination bolt (AA). Attach the middle incline combination set (L1) to the beam decorator (D) using the M6 nuts (HH) and M6x75 Combination Bolts ully tighten all the bolts at this step.
Assembly (continued) 9 Inserting the Top Corner Incline Tube to the Bottom Plate, Attaching the Top Corner Incline Tube and the Top Border Tube to the Incline Outer Metal Part Insert the top corner incline tube (U) to the bottom plate (Y). Attach the top corner incline tube (U) and the top border tube (V) to the incline outer metal part (N) using the M6x15 combination bolt (AA) as shown below. ully tighten all the bolts at this step. U Y U V V N AA V N N U V U V Y N V N 13 HAMPTONBAY.
Assembly (continued) 10 Attaching the Metal Plate 1 to the Top Border Tube Attach the metal plate 1 (W) to the top border tube (V) using the M6x15 combination bolts (AA). ully tighten all the bolts at this step.
Assembly (continued) the Top Cover Plate and the Top Plate to the Metal Plate 1, 11 Attaching Attaching the Top Plate and the Hook to the Bottom Plate Attach the top cover plate (X) to the metal plate1 (W) using the M6x40 combination bolts (CC). Attach the top plate (Z) to the bottom plate (Y) using the M6x30 combination bolt (BB) and plastic washer (II). Screw the hook (Y1) to the bottom plate (Y). ully tighten all the bolts at this step.
Assembly (continued) 12 Attaching the Top Corner Incline Tube to the Top Frame Plug Attach the top corner incline tube (U) to the top frame plug (O) using the M6x15 combination bolts (AA). ully tighten all the bolts at this step.
Assembly (continued) 13 Attaching the Border Tube to the Incline Tube Attach the border tube 1 (M) and border tube 2 (M1) to the corner incline tube (L) using the M6x15 combination bolts (AA). Attach the border tube 1 (M) and border tube 2 (M1) to the middle incline combination set (L1) using the M6x15 combination bolts (AA). lly tighten all the bolts at this step. AA M M1 L M1 M M M1 M1 M M M1 L1 AA M AA M1 17 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 14 Attaching the Metal Plate Attach the metal plate 7 (R1) and the metal plate 6 (R) to the middle incline combination set (L1) using Dia.25 Plastic washer (JJ), M6 nut (HH) and nut cover (LL). Attach the metal plate 7 (R1) and the metal plate 6 (R) to the corner incline tube (L) using the M6x15 combination bolts (AA). Attach the metal plate 7 (R1) and the metal plate 6 (R) to the border tube (M&M1) using the M6x15 combination bolts (AA). ully tighten all the bolts at this step.
Assembly (continued) 15 Attaching the Metal Plate Attach the metal plate 4 (Q) and metal plate 5 (Q1) to the corner incline tube (L) using the M6x15 combination bolts (AA). Attach the metal plate 4 (Q) and metal plate 5 (Q1) to the border tubes (M &M1) using the M6x15 combination bolts (AA). ully tighten all the bolts at this step. UP BB Q1 R1 AA M&M1 Q&Q1 Q1 R1 Q R Q R R1 STEP 2 M&M1 Q1 Q1 R1 R Q R Q R1 Q1 AA UP Q Q1 Q R L STEP 1 19 HAMPTONBAY.
Assembly (continued) 16 Attaching The Metal Plate Attach the metal plate 2 (P) and metal plate 3 (P1) to the corner incline tube (L) using the M6x15 combination bolts (AA). Attach the metal plate 2 (P) and metal plate 3 (P1) to the border tubes (M&M1) using the M6x30 combination bolts (BB). ully tighten all the bolts at this step.
Assembly (continued) 17 Attaching the Cover Plate Attach the cover plate (T) to the assembled frame using the Dia.16 Plastic washer (KK), M6 nut (HH) and nut cover (LL). ully tighten all the bolts at this step. T T T T T LL HH KK T 21 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 18 Attaching the Outer Metal Part Attach the incline outer metal part (N) and the border tube outer metal part (N1) to the assembled frame using the M6x15 combination bolts (AA) as shown below. ully tighten all the bolts at this step.
Assembly (continued) 19 Tightening the Bolts and Securing the Post to the Ground Once all of the bolts are in place, fully tighten all the bolts using wrench (NN) and hex wrench (OO). Secure the post (A) to the ground using ground spike (MM). A B1 B MM 23 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 20 Attaching the Fabric Rod to the Assembled Long Beam Insert fabric rod (F) into fabric rod cap (G),then attach to the assembled long beam(C & C1) using M6x40 bolts (DD). Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (OO).
Assembly (continued) 21 Attaching the Split Rings and Netting Attach the split rings (H) to the fabric rods (F). Attach the netting (J) to the assembled gazebo using the split rings (H) as shown below. J J STEP 1 H F STEP 2 J J 25 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Care and Cleaning For best results, clean the gazebo with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach or solvents. Keep the gazebo away from fire, extreme heat, freezing conditions, and inclement weather as rain, hail, sleet, snow, or wind.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
