Item # 000 000 000 Model # GFM00471A USE AND CARE GUIDE 10x10 FT. PERGOLA Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and conidence you have placed in Hampton Bay through the purchase of this pergola. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of contents .................................................................2 Safety Information ...............................................................2 Product Caution ........................................................................2 Safety Warnings ........................................................................2 Warranty...................................................................................2 What is covered ....................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC DD Part AA Description M6x20 combination bolt Quantity 24+1 BB CC DD EE M6x55 combination bolt M6x70 combination bolt Ground spike Hex wrench 16+1 26+1 16+1 2 3 EE HAMPTONBAY.
Pre-Assembly (continued) F PACKAGE CONTENTS H J J B H H G A2 G A1 B J B B B B G K A1 A2 K J B L1 E D D L2 E C C L2 L1 D C C I I K K K I I Part A1 A2 B C D E F Description Right connector bar Left connector bar Top bar Post Thin shade rod Thick shade rod Canopy Quantity 2 2 7 4 4 2 1 4 Part G H I J Description End tip Inner tip Post base plate Top bar connector Quantity 4 10 4 4 K L1 L2 Tube cover Plastic connector 1 Plastic connector 2 8 2 2
Assembly 1 ATTACHING THE BRACKETS Insert the left connector bar (A2) into the right connector bar (A1), align the holes and secure the connector bars (A1 & A2) with M6x20 combination bolts (AA). NOTE: Fully tighten all bolts using the hex wrench (EE). A2 A1 AA A1 A2 A1 A2 AA 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 2 INSERTING THE END TIPS Insert the end tips (G) into the top bar (B) and align the holes. Repeat this step for another top bar (B).
Assembly (continued) 3 ATTACHING THE TWO TOP BARS TO THE CONNECTOR BARS Attach the two top bars (B) to the assembled left and right connector bars (A1 & A2) by using the top bar connectors (J). Secure the top bar connectors (J) with M6x20 combination bolts (AA) and M6x70 combination bolts (CC), as shown below. NOTE: Make sure the screw holes on the assembled left and right connector bars (A1 & A2) are facing inside.
Assembly (continued) 4 INSERTING THE INNER TIPS Insert the inner tips (H) into the top bar (B) and align the holes. Repeat this step for the other four top bars (B).
Assembly (continued) 5 ATTACHING THE TOP BARS TO THE CONNECTOR BARS Attach the top bars (B) to the assembled left and right connector bars (A1 & A2) using M6x70 combination bolts (CC), as shown below. CC B H A2 H A1&A2 H B A1 B B A1 A2 H 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 6 ATTACHING THE POST BASE PLATES TO THE POSTS Attach the post base plates (I) to the four posts (C) using M6x20 combination bolts (AA). NOTE: Fully tighten all bolts using the hex wrench (EE).
Assembly (continued) 7 ATTACHING THE POSTS TO THE ASSEMBLED STRUCTURE Align the holes and attach the posts (C) to the assembled structure using M6x20 combination bolts (AA) and M6x70 combination bolts (CC). NOTE: : Suggest using two ladders to assemble this step. CC AA G CC AA C CC A1&A2 B J G A1 A2 J G C J B C B 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 8 ATTACHING THE POSTS TO THE ASSEMBLED STRUCTURE Align the holes and attach the other two posts (H) to the assembled structure using M6x20 combination bolts (AA) and M6x70 combination bolts (CC). Once all of the bolts are in place, fully tighten the bolts. NOTE: : Suggest using two ladders to assemble this step.
Assembly (continued) 9 ATTACHING THE CANOPY Attach the canopy (F) to the assembled structure, as shown below. F 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 10 ATTACHING THE THICK SHADE RODS Insert the thick shade rods (E) through the canopy (F), as shown below. Attach the plastic connector 1 (L1) and the plastic connector 2 (L2) to the right and the left side of the thick shade rod (E), repeat this step for another side.
Assembly (continued) 11 ATTACHING THE THIN SHADE RODS Insert the thin shade rods (D) through the plastic connector 1 (L1) and plastic connector 2 (L2), as figure 1. Connect the tube covers (K) to the top of the thin shade rods (D), align the holes and secure the thin shade rods (D) using M6x55 combination bolts (BB), as figure 2. Place the tube covers (K) to the end of the thin shade rods (D), align the holes and secure the thin shade rods (D) using M6x55 combination bolts (BB), as figure 3.
Assembly (continued) 12 INSTALLING THE GROUND SPIKES Insert the ground spikes (DD) through the post base plates (I) and into the ground.
Assembly (continued) 13 COMPLETING THE ASSEMBLY Ensure all connections are secure before use. To adjust the length of the canopy (F), keep the plastic connectors 1 (L1) and the plastic connectors 2 (L2) in unlock position. The length of the canopy (F) cannot be adjusted when the plastic connectors 1 (L1) and the plastic connectors 2 (L2) in lock position.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
