Item #1001 823 283 Model #G-FTB-51057B USE AND CARE GUIDE Cross Ridge Gas Fire Pit Table R C US Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fire pit. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ..........................................................2 Safety Information...........................................................2 Warranty.........................................................................5 What is Covered.........................................................5 What is Not Covered ..................................................5 Pre-Assembly...……………………...…………………….5 Planning Assembly .....................................................
Safety Information (continued) WARNING: You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANS/NFPA 58. Your local library or fire department should have this book. The pressure regulator and hose assembly supplied with the appliance must be used.
Safety Information (continued) WARNING: The unit is not for use with solid fuel. The installation must conform with local codes or, in the absence of local codes, ANSIZ223. 1/NFPA54, NFPA58 Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2. The heater, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.
Warranty 1 YEAR LIMITED WARRANTY WHAT IS COVERED We warrant the metal frame to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charge to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
Pre-Assembly (continued) PACKAGE CONTENTS A B C D E G F H I J K Quantity Part Side Panel 1 1 1 2 G H I J E Stand 2 K F Side Panel with Window 1 Part A B C D Description Cover Lava Rock (13.
Assembly 1 Assembling the stand G I □ Attach the left stand (G), the right stand (I) and the stand (E) to the table top with burner (C) using four (4) M6 x10 mm bolts (AA). E □ Do not tighten the bolts at this step. CAUTION: Wear gloves during assembly. C AA 2 Assembling the side panel D □ Attach the side panel (D) to the stands using four (4) M6 x 10 mm bolts (AA). □ Do not tighten the bolts at this step. AA 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 3 Assembling the side panel with window F □ Attach the side panel with window (F) to the stands using four (4) M6 x10 mm bolts (AA). □ Do not tighten the bolts at this step. AA 4 Assembling the gas tank support J □ Attach the gas tank support (J) to the stands using four (4) M6 x 10 mm bolts (AA). □ Do not tighten the bolts at this step.
Assembly (continued) 5 Assembling the door H □ Slide the hinge of door (H) on to the left stand (G). G 6 Place the lava rock A □ Place the lava rock (B) into the fire bowl. Ensure lava rock is not placed on the ignition portion of the burner. Place the cover (A) over the top. B □ The cover must be removed when the burner is in operation. Wait until the unit cools before replacing the cover. Ignition 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 7 Assembling the cylinder □ Put the cylinder into the gas tank support (J), and secure the cylinder by tightening the screw in the gas tank support. Connect the hose and regulator to the cylinder. NOTE: The propane cylinder is sold separately. Use a standard 20 lb. propane cylinder only. J 8 Installing the AAA battery □ Open the igniter and place the AAA battery (K) into the igniter. Then tighten clockwise.
Operating WARNING: Never use this appliance for other than the intended use. DO NOT use this appliance to prepare food. Initial Lighting: When lit for the first time, the appliance emits a slight odor. This is a normal temporary condition caused by the “burn-in ” of internal paints and lubricants used i n the manufacturing process and does not occur again. Simply run the main burner on high for approximately one-half hour.
Operating (continued) LEAK TESTING OPERATION WARNING: A leak test must be performed annually or if a part of the gas system is replaced. WARNING: Never use an open flame to check for gas leaks. Be certain no sparks or open flames are in the area while you check for leaks. Sparks or open flames will result in a fire or explosion, damage to property, serious bodily injury, or death. LEAK TESTING: This must be done before initial use, annually, and whenever any gas components are replaced or serviced.
Operating (continued) LIGHTING INSTRUCTIONS 1. Press and hold electronic igniter button. 2. Turn the burner control to the high position, press and hold. When the burner lights, release the electronic igniter button. 3. Continue to depress the burner control knob for 30 seconds and then release. If the flame goes out, repeat the procedure. 4. Adjust the flame to the desired height with the burner control knob. Visually check the burner flames as pictured below.
Maintenance Storage between uses: □ Turn the control knob to “OFF” position. □ Disconnect LP source. □ Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). □ If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages. NOTE: Wait until heater is cool before covering. Storage during periods of extended inactivity or when transporting: □ Turn the control knob to “OFF” position.
Troubleshooting PROBLEM PROBLEM CAUSE SOLUTION The flame and heat are low when the valve is turned to high. The propane lighting procedure was not followed correctly. Ensure lighting procedure is followed carefully. The valve must be in the off position when the tank valve is turned on. Turn the tank on slowly to allow pressure to equalize. See Lighting Instructions in the Operating section. Burners burn with yellow flame, accompanied by the smell of gas.
Service Parts A B C D E G F H I J K AA Part A B C D E F Quantity Part Side Panel 1 1 1 2 G H I J Stand 2 K AA Description Cover Lava Rock (13.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
