Item #1000 000 000 Model #FS40-21MA USE AND CARE GUIDE THD PRODUCT NAME: 16-INCH STAND FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this [product description]. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents .......................................................... 2 CAUTION .................................................................... 2 WARNING ........................................................................ 2 WARNING ........................................................................ 3 RULES FOR SAFE OPERATION ................................... 4 PART FIGURE ........................................................ 5 Notice:.............................
WARNING 4. Do not leave the fan running unattended. 5. Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without supervision. 6. If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 7.
RULES FOR SAFE OPERATION 1. Never insert fingers, pencils, or any other object through the grille when fan is running. 2. Disconnect fan when moving from one location to another. 3. Be sure fan is on a stable surface when operating to avoid overturning. 4. DO NOT use fan in window, rain may create electrical hazard. 5. Household use only.
PART FIGURE Package Contents A B C E F Tighten G D Loosen H Fasten I J K Part A B C D E F G H I J K Description Front grill Quantity 1 Fan blade Plastic nut Rear grill Motor shaft Motor housing Spinner Internal Pole Extension Pole Height adjustment ring Stand 1 1 1 1 1 1 1 1 1 1 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Notice: All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.
ASSEMBLY OF CROSS STAND & COLUMN UNIT 1. Insert the pole assembly into the connector from top to bottom, ensure it is installed in place(Through the through hole at the bottom of the connector, it can be judged whether the pole is installed in place) .(Fig.1) Fig.1 Observation hole Height adjustment ring Pole assembly Crossbase connector 2. Insert 4 stands into the crossbase connector. Ensure the stands are well fixed into the connector.(Fig.2,3) Fig.2 Fig.
ASSEMBLY OF CROSS STAND & COLUMN UNIT 3. From the extension pole loosen the height adjustment ring and adjust the internal pole to the desired height. (Note: If you can’t find the internal pole, it slides inside the extension pole. You can pull it out from the extension pole.) Fasten the height adjustment ring.(Fig.4,5) Fig.4 Fig.5 Tighten Loosen 4. To attach the head unit to the internal pole, loosen the thumb screw on the bottom of the head unit.
FRONT AND REAR GUARD INSTALLATION 1. Align the front grill buckle with the top line of the rear grill from top to bottom, after aligning, look at the schematic from the back.(Fig.7) Fig.7 Grill line Buckle Grill line Buckle 2. Press the grill in both hands in sequence, and when it is installed, you will hear a click. (Fig.8) Fig.8 3. Self-locking installation.(Fig.9) Fig.9 Grill buckle 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
FRONT AND REAR GUARD INSTALLATION 1. Speed is controlled by the Knob switch: 0---Off 1---Low 2---Medium 3---High 2. To make/stop the fan head oscillate. Push down/pull up the clutch knob. 3. To adjust the air flow upward or downward, push the grilles lightly to the desired direction. 4. The height of the fan can be adjusted by loosening the height adjustment ring, carefully carefully raising or lowering the fan and firmly re-tightening the height adjustment ring.
USER SERVICING INSTRUCTIONS 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 3. Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the terminal), then prize the fuse gradually and slowly, but not overexert. If you feel tight, you can try it at several times and prize the fuse little by little.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM RETAIN THIS MANUAL FOR FUTURE USE.