Full Product Manual

Installation
Installation
Part Description
Fixture body
Fixture shade
Canopy nut
[preassembled on the canopy (B)]
Socket ring [preassembled on the xture body (D)]
D
E
F
C
B
A
Canopy
TOOLS REQUIRED
Hardware not shown to actual size.
HARDWARE INCLUDED
2
Installing the mounting bracket assembly
1
Removing the mounting bracket
assembly
3
Making the electrical connections
Safety Information
PACKAGE CONTENTS
Pre-Installation
Pre-Installation
Quantity
1
1
1
1
1
2
NOTE:
Make sure the power is off.
□
Pull the supply wires down out of the outlet box.
□
Fasten the mounting bracket assembly (A) to the
outlet box with the outlet box screws (AA).
□
□
□
□
Ladder Gloves
Safety goggles
Phillips screwdriver Electrical tape
Wirestripper
Installation
Wrap electrical tape (not included) around the wire
connectors (BB), and ensure they are secure.
Push all excess wire and wire connections back
into the outlet box.
□
□
Attach the ground wire from the outlet box to the ground
screw on the mounting bracket (A), which is green and
marked "G".
□
□
□
Read all instructions prior to beginning the
installation process.
Make sure the power is turned off at the
electrical panel box before beginning your
installation. Turning the power off at the wall
shock.
IMPORTANT SAFETY INSTRUCTIONS
(Save These Instructions)
square x 2-1/8 in. deep metal octagon outlet box.
The box must be directly supported by the
building structure.
CAUTION:
Keep the lamp away from
materials that may burn.
WARNING: This lighting is suitable for wet
locations.
AA
Outlet box screws
x 2
BB
Wire connectors
x 3
Mounting bracket assembly [preassembled on the canopy (B)]
Loosen the canopy nuts (C) and separate the
mounting bracket assembly (A) from the
canopy (B) on the xture.
to the negative wires from the supply circuit, the positive
from the supply circuit, and the ground wire (bare) from
the wire connectors (BB).
5
Attaching the canopy to the wall
4
□
Raise the canopy (B) up to the outlet box.
□
□
Secure the canopy (B) to the mounting bracket
assembly
(A) using the canopy nuts (C) provided.
Adjust the length of the m
ounting bracket assembly
(A) studs and hex nuts if necessary.
Warranty
USE AND CARE GUIDE
LIGHT FIXTURE
THANK YOU
3-YEAR LIMITED WARRANTY
The manufacturer warrants this lighting xture against defects in materials and workmanship for a period
of three years from the date of purchase. If within this period the product is found to be defective in material
or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the
original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase
price to the original purchaser or consumer. This warranty does not cover light bulbs or the xture
becoming damaged due to misuse, accidental damage, improper handling and/or installation, and
specically excludes liability for direct, incidental, or consequential damages. As some states do not allow
exclusions or limitations on an implied warranty, so the above exclusions and limitations may not apply.
This warranty gives you specic rights and you may also have other rights that vary from state to state.
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this light xture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full
line of products available for your home improvement needs. Thank you for choosing
Hampton Bay !
Care and Cleaning
□
removing the fuse at the fuse box.
□
□
CAUTION: Do not use chemical solvents or harsh
may occur.
Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the
interior and exterior surfaces of the xture.
B
A
D
E
F
C
C
B
A
C
D
D
E
F
Item #
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
7 a.m. - 6 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST Saturday
1-855-HD-HAMPTON
Questions, problems, missing parts? Before returning to store,
HAMPTONBAY. COM
Retain this manual for future use.
call Hampton Bay Customer Service
B
A
Outlet box
A
AA
BB
A
CAUTION: Refer to the re-lamping label located on
Troubleshooting
Problem Possible Cause Solution
The light bulb will not
illuminate.
The light bulb is burned
out.
Replace the light bulb.
The power is off.
Make sure the power supply is on.
There is a faulty wire
connection.
Check the wiring.
Contact a quali
ed and licensed
electrician if you are not comfortable
troubleshooting wiring problems.
There is a faulty switch.
Test or replace the switch.
Check the wire connections.
The fuse blows or the circuit
breaker trips when the light bulb
is illuminated.
6
Installing the bulb
□
Install the bulb (not included) into the bulb socket on the
ture body (D).
CAUTION: Turn off/unplug the light and
allow it to cool before replacing the bulb.
Installing the shade
□
□
□
Place the xture shade (E) over the xture body (D).
Screw the socket ring (F) back on to the xture body (D)
to secure the shade (E) in place.
Unscrew the socket ring (F) from the xture body (D).
There are crossed wires, or
the xture is not properly
grounded.
Waterproof silicon
Mounting surface
Canopy
7
Water Proof Seal
□
between the canopy and mounting surface,
waterproof silicon, caulk or gel should be applied to
seal any gaps around the junction point.
□
□
All electrical connections must be in accordance
with local codes and the National Electrical Code.
If you are unfamiliar with methods of installing
licensed electrician.
This xture should be mounted on the wall at least
47.24 in. above the ground level.
1002664793, 1002664820
302598235, 302598248
302598259, 305436439
Model #EW10139GV, EW10139RD
EW10139BK, EW10139GR
EW10139WH,EW10139ABZ