Use and Care Manual

ManualsBrandsHampton Bay ManualsLighting1-Light Chrome Hanging Large Pendant

Pendant Light

Instruction Manual

Please read carefully and save these instructions, as you may need them at a later date.

SAFETY

WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS

SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF.

TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO

PREVENT ELECTRICAL SHOCK.

NOTE: The important safeguards and instructions appearing in this manual are not meant to cover

all possible conditions or situations that may occur. It must be understood that common sense,

caution, and care, are factors which cannot be built into any product. These factors must be supplied

by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS

CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If

you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring

handbook or have your lighting fixture installed by a qualified, licensed electrician.

UNPACK THE PACKAGE

Check the contents to be sure everything is included

Tools Needed: Slotted screwdriver, Adjustable wrench, Step ladder, Wire cutters, wiring supplies as

required by electrical code.

INSTALLATION & OPERATION INSTRUCTIONS

GENERAL

Before starting the installation, disconnect the power by turning off the circuit breaker or by

removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not

sufficient to prevent electrical shock.

All electrical connections must be in accordance with local and National Electrical Code (NEC)

standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a

qualified electrician.

Remove the fixture and the mounting packages from the box and make sure that no parts are missing

by referencing the illustrations on the installation instructions.

Be sure to read these installation instructions and review the diagrams thoroughly before installation.

Summary of content (6 pages)

PAGE 1
Pendant Light Instruction Manual Please read carefully and save these instructions, as you may need them at a later date. SAFETY WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
PAGE 2
Assembly and Installation 1. Insert Fixture Cable into decorative pipe(s) (11, 12, 13 and 14) as needed to create the desired total length. Next, fasten the bottom section of pipe to the lamp cup (15). Then attach canopy (9) to top section of pipe. 2. Make sure all the electrical is power off, and then attach the mounting plate (7) to the junction box (1) with the provided machine screws (6). 3.
PAGE 3
1. Junction box 2. Wire connector 3. Ground wire 4. Cable 5. Ground screw 6. Machine screw 7. Mounting plate 8. Mounting screw 9. Canopy 10. Decorative nut 11. Decorative pipe 1 12. Decorative pipe 2 13. Decorative pipe 3 14. Decorative pipe 4 15. Lamp cup with socket 16. Shade 17. Socket ring 18.
PAGE 4
Accesorio luminoso colgante Manual de instrucciones Lea cuidadosamente y guarde estas instrucciones ya que puede necesitarlas en el futuro. SEGURIDAD ADVERTENCIA: ASEGÚRESE DE QUE EL SUMINISTRO ELÉCTRICO DE LOS CABLES CON LOS QUE ESTÁ TRABAJANDO ESTÉ DESCONECTADO, QUE HAYA EXTRAÍDO EL FUSIBLE O QUE ESTÉ DESACTIVADO EL DISYUNTOR. DESCONECTAR EL SUMINISTRO ELÉCTRICO CON EL INTERRUPTOR DE LA LUZ NO ES SUFICIENTE PARA EVITAR DESCARGAS ELÉCTRICAS.
PAGE 5
Retire el accesorio luminoso y los paquetes de montaje de la caja, y consulte las ilustraciones que figuran en las instrucciones de instalación para asegurarse de que no falten piezas. Asegúrese de leer estas instrucciones de instalación y revise los diagramas cuidadosamente antes de comenzar la instalación. Armado e instalación 1. Inserte el cable del accesorio luminoso en los tubos decorativos (11, 12, 13 y 14) según sea necesario para crear la longitud total deseada.
PAGE 6
1. Caja de empalmes 2. Capuchón de empalme 3. Conductor de conexión a tierra 4. Cable 5. Tornillo de puesta a tierra 6. Tornillo para metal 7. Placa de montaje 8. Tornillo de montaje 9. Rosetón 10. Tuerca decorativa 11. Tubo decorativo 1 12. Tubo decorativo 2 13. Tubo decorativo 3 14. Tubo decorativo 4 15. Asiento de la lámpara con zócalo 16. Pantalla 17. Aro del zócalo 18.