COE ETI FINLEY SAY OWT NA po OER USE AND CARE GUIDE UNFINISHED ADIRONDACK CHAIR Questions,problems,missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. 7 Friday, 9 a.m. 6 WOLVERHAMPTON NORTHAMPTON THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this chair. We strive to continually create quality products designed fo enhance your home.
Table of Contents Table of Contents. Safety Information, Warranty What is covered What is not covered. Planning Assembly Hardware Included Chair Package Contents. Assembly Care and Cleaning .. Troubleshooting EL Important Safety Instructions assembly ares. READ ALL INSTRUCTIONS BEFORE USE D DANGER: Keep children and parts away from the To reduce the risk of Injury to persons: 1. Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
PLANNING ASSEMBLY Please read this entire Instruction manual prior to assembly. Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface to avoid scratching. NOTE: More than one person may be required to assemble LUELLA HARDWARE INCLUDED NOTE: Hardware shown to actual size. £ . 7 “ont Opp Part Description Quantity AA ME6X70 Bolt 2+1 BB M6X60 Bolt 2+1 cc M6X45 Bolt 10+1 DD1 M6X40 Cam Bolt 241 DD2 $14.
Pr-Assembly (continued) CHAIR PACKAGE CONTENTS /N\ IMPORTANT: Do not fully tighten bolts/screws until afl pieces are loosely assembled.
Assembly 1 Attaching the front legs to the seat Securing the seat o Attached the front leg (C) to the seat (D) with bolt {CC} and 4 2 8 Secure the seat (D) and the front legs (C) by attaching the cross flat washer (FF} + Hex nuts (GG) + Hex Key (HH). ° Do NOT completely tighten at this time. beam {F) using serif-tappng screws {EE}. 3/48 NOTE: Please ensure ali the bolts are assembled correctly ELC IEEE TEEN RE a1 Do not fully tighten bolts/screws until all pieces are Purposely assembled.
Care and Cleaning o Check tightness of fasteners every 3 months. o Clean dust with a dry, non-colored, lint free cloth. « Stains can be removed using mild soap and a damp cloth. Do not clean with bleach or solvents. * When not in use, store in a cool dry place. * To prolong product lifespan avoid extended exposure outside in rain and direct sunlight. Where possible, place under covers, « For residential use only, not for commercial use. Troubleshooting ale) Solution rapt ry Assembly holes do not line up.
HAMPTON BAY. Questions,problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. 7 p.m, EST, Monday Friday, 9 a.m. 6 p.m. EST,Saturday, WOLVERHAMPTON NORTHAMPTON Retain this manual for future use.