Instructions / Assembly

This fan comes fully assembled and is ready for use.
1. Plug the USB connector into an USB socket or the power cord
with AC adaptor into a wall outlet. The adaptor
converts a standard household power source 100~240V AC to
DC power 5.0V DC.
2. USB cable to power fan from computer, laptop, portable charger, etc.
3. This fan can be used as desk fan(Fig. 1)
and clip fan as desired (Fig. 2).
To operate, press the rocker switch to
the appropriate speed
option: O=Off, I=Low, II=High.
4. Tilt the fan body manually up or down, the
maximum tilt angle: 90°(Fig. 3).
Fig. 3
16. Do not operate any fan with a damaged cord or plug. Discard fan or return to an
authorized service facility for examination and/or repair.
17. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped over.
18. WARNING: To reduce the risk of electric shock and injury to persons, do not use
this fan near a door or window.
19. WARNING: To reduce the risk of fire or electric shock, do not use this fan with
any solid-state speed control device.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
Operating Instructions
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Fig. 2Fig. 1

Summary of content (4 pages)