Item #1004 156 152 Model #BPT18-34A-5 USE AND CARE GUIDE READ AND SAVE THESE INSTRUCTIONS 110 CFM CEILING BATHROOM EXHAUST FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this exhaust fan.
Table of Contents Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Typical Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty LIMITED LIFETIME WARRANTY WHAT IS COVERED If this product fails due to a defect in materials or workmanship at any time during the first THREE years of ownership, the manufacturer will replace it free of charge, postage-paid at their option. This warranty does not cover products that have been abused, altered, damaged, misused, cut or worn. This warranty does not cover use in commercial applications. Use only manufacturer-supplied genuine warranty repair replacement parts to repair this fan.
Pre-Installation WIRING DIAGRAMS FA N BLACK (LIVE) WHITE (NEUTRAL) GREEN (GROUND) QUICK CONNECTOR INSTRUCTIONS □□ Strip wires 3/8 in. - 1/2 in. To be sold only with installation instructions. □□ Grip the wire firmly and push the stripped end of the wire into the open port of the connector. Use only one conductor per port. WARNING: Wiring must comply with all applicable electrical codes. Turn OFF power before removing or installing connectors.
Pre-Installation (continued) TOOLS REQUIRED Claw hammer Philips screwdriver Safety glasses Flat screwdriver Utility knife Power drill Drill bits Duct tape PACKAGE CONTENTS C D A E F B G Part Description Quantity A Fan housing 1 B Grille 1 C Long wood screws (M4x30mm) 8 D Machine screw (M4x12mm) 3 E Suspension bracket I 1 F Suspension bracket II 1 G Suspension bracket III 1 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Installation - New Construction CAUTION: Make sure power is switched off at service panel before starting installation. NOTE: Ceiling mount only. 1 2 Attaching the fan housing to the ceiling joist Attaching the fan housing to the ceiling joist using suspension brackets □□ If spacing between joists is 16 in. - 24 in., insert suspension bracket I (E) into the bracket cover on the duct connector side of the fan housing (A).
Installation - New Construction (continued) 5 6 Removing the wiring cover on the fan housing Connecting the duct □□ Connect a 4 in. circular duct (not supplied) and vent to the outside. Secure it with duct tape (not supplied) or a clamp (not supplied) to make the connection secure and air tight. □□ Remove the wiring cover (1). Pull the house wires through the wire box cover hole.
Installation - Existing Construction CAUTION: Make sure power is switched off at service panel before starting installation. 1 Removing the existing fan 2 Measuring the ceiling opening 3 Enlarging the opening (optional) □□ Remove the old fan from the ceiling. □□ Measure the opening to ensure it is large enough to accommodate the new fan body (A) (10.8 in. x 10.5 in.). □□ If this fan is not replacing an old fan, be sure to cut a 10.80 in. x 10.50 in. opening for the fan body (A). " 10.
Installation - Existing Construction (continued) 4 1 Removing the motor and power line □□ Loosen the three screws where indicated by the arrows. □□ Press the metal clip (1) and remove the motor and power line (2) from the housing (A). 5 2 Removing the duct □□ Loosen the one screw from the housing (A) and remove the duct connector (1). 1 6 2 Removing the junction box □□ Remove the junction box (1) from the housing (A) by loosening and removing the screw (2). 1 9 HAMPTONBAY.
Installation - Existing Construction (continued) 7 Installing the housing 1 □□ Pull the house wires through the wire cover hole (1). A □□ Pull the 4 in. circular duct (not provided) through the housing. □□ Install the housing (A) to the joist using one of the following two methods: –– If spacing between the joists is 12 in., secure the bottom of the housing (A) to the bottom of the joists using screws (C). A –– If spacing between the joists is greater than 12 in.
Installation - Existing Construction (continued) 10 Connecting the duct □□ Using duct tape or a hose clamp (not included), attach the 4 in. circular duct (not included) to the duct connector (1). 1 □□ Reconnect the duct connector using the previouslyremoved screws (2). 2 11 Reinstalling the motor into the housing A □□ Align the motor outlet with the duct connector. Reinstall the motor to the housing, ensuring the metal clip (1) slides into the slot in the housing (2).
Care and Maintenance WARNING: Disconnect power supply before servicing. □□ □□ □□ □□ See SAFETY INFORMATION before proceeding. Routine maintenance should be done at least once a year. Never use solvents, thinner or harsh chemicals for cleaning the fan. Do not allow water to enter the motor. Do not immerse metal parts in water. Troubleshooting Problem The fan seems louder than it should. The fan is not clearing the room. Solution The CFM is too great.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.