Instructions / Assembly

ManualsBrandsHampton Bay ManualsLandscape LightingLine Voltage Black LED Spotlight

PACKAGE CONTENTS

A – Lamp Body x1

B – Switch x1

C – Ground Stake x1 D - Plug

(with 5 ft. wire attached to lamp body)

Assembly and Installation

Installing the light

Connecting the power

WARNING: Never push the fixture into the ground by the lamp body (A)

or use a hammer to insert the ground stake (C) into the ground.

□ Prepare a hole in the installation location. Use a tool such as a

screwdriver (sold separately) to prepare the installation hole to ensure

the hole is not larger than the ground stake (C).

□ Install the fixture in the ground by pushing on the foot step (1) on the

ground stake (C). Do not push on the lamp body (A).

□ The lamp body (A) can rotate up and down 90 degrees.

□ After the fixture is installed, insert the plug (D) into an outdoor GFCI

120V wall outlet.

Summary of content (5 pages)

PAGE 1
PACKAGE CONTENTS A – Lamp Body x1 B – Switch x1 C – Ground Stake x1 D - Plug (with 5 ft. wire attached to lamp body) Assembly and Installation 2 1 Installing the light Connecting the power WARNING: Never push the fixture into the ground by the lamp body (A) or use a hammer to insert the ground stake (C) into the ground. □ Prepare a hole in the installation location.
PAGE 2
Assembly and Installation (continued) 3 Adjusting the illumination, brightness output of the light Choose your preferred lumen output from two options: High light or Low light. The light cycles from High light  OFF  Low light  OFF  High light  OFF  Low light, etc. □ Push the switch (B) to cycle through the above selections. □ □ Care and Cleaning □ Clean the fixture with a soft dry cloth. □ Do not use any cleaners with chemicals, solvents or harsh abrasives.
PAGE 3
CONTENIDO DEL PAQUETE A – Estructura de la Lampara x1 B – Interruptor x1 C – Estaca de Tierra x1 D – Enchufe x1 (con cable de 5 pies. fijado a la estructura de la lampara) Montaje e Instalación 1 Instalando la luz 2 Conectando la electricidad ADVERTENCIA: Nunca entierre la estructura de la lámpara (A) o use un martillo para insertar la estaca a tierra (C) en el suelo. □ Haga un hoyo en el lugar de instalación.
PAGE 4
Montaje e Instalación (continuado) 3 Ajuste de la iluminación, salida de brillo de la luz Elija su salida de luz preferida entre dos opciones: luz alta o luz baja. La luz cambia de Luz alta  APAGADO Luz baja  APAGADO  Luz alta  APAGADO  Luz baja, etc. □ Presione el interruptor (B) para recorrer las selecciones anteriores. □ □ Mantenimiento y Limpieza □ Limpia la lámpara con un paño suave y seco. □ No uses limpiadores con químicos, solvents, o producto.
PAGE 5
FCC Warning Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.