Full Product Manual

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
PACKAGE CONTENTS
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light
sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
Preparing for installation
1
Item #1006 683 327
Model #93021
Firmly slide the stake (D) into the
post of the light body (A).
NOTE: Do not use a hammer. If the ground is hard,
use water to soften it or a trowel to loosen the soil.
Installation options
2
Push the assembly rmly into the ground.
Twist the knob (bb) to adjust the angle of the light head.
Slide the cowling (cc) forward or backward to get the
desired beam angle.
Use and Care Guide
Solar LED Spot Light
A - Light body x 2 B - 18500 3.2V 800mAh LiFeP04
rechargeable battery (pre-installed) x 2
C - Battery cover x 2
FOR FIRST TIME USE: Slide the
switch (aa) to the “ON” position.
D - Stake x 2
BA
D
C
A
aa
aa
D
A
bb
cc

Summary of content (4 pages)