Manualshelf

Instructions / Assembly

ManualsBrandsHampton Bay ManualsSmart HomeLauderdale Low Voltage Matte Black Color Changing LED 3-Tier Path Light Powered by Hubspace
123
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
PACKAGE CONTENTS
Installation
Attaching and installing the light
1
Item #xxxx xxx xxx
Model #92899
□ Detach and place the wire connector (D) on opposite sides of the low-
voltage cable (not included) where the xture will be located.
□ Align and t the main low-voltage cable vertically in the slot of the
wire connector as shown.
□ Press the wire connector (D) together until it is fully seated and locked
around the cable. Pre-set prongs will pierce the cable insulation and
establish contact. Turn on the power unit.
□ If the light xture does not turn on, repeat the previous 3 steps.
□ Once the clip-on connector is in place, we recommend wrapping it in
electrical tape (not included) for additional protection.
□ Attach the xture head (A) to the top post (B) by inserting the upper end of
the post (B) into the xture head and then twisting clockwise.
□ Insert the xture wire (2) into the groove located on the top of the ground
stake.
□ Attach the post (B) to the stake (C) by placing the bottom of the post (B)
onto the top of the stake (C) and twist clockwise.
□ Prepare a hole in the installation location. Use a screwdriver to prepare
the installation hole to ensure that the hole is not larger than the stake (C).
□ Install the xture in the ground by pushing on the foot step (1) on the
stake (C). Do not push the xture head.
Connecting the wires
2
A - Fixture head B - Post C - Stake with foot step
D - Connector with
12 in. wire length
(attached to xture)
CAUTION: The wire from the low voltage power unit shall
be 12-16 AWG type underground low-voltage cable.
IMPORTANT:
□ Protect the wiring by routing it in close proximity to the
light, or next to a building structure such as a house or
deck.
□ Do not bury the wiring by more than 6 in. (15.24 cm) in
order to connect to the main secondary wire.
□ Do not submerge xtures in water.
NOTE: Do not use a hammer. If the ground is hard, use
water to soften it or a trowel to loosen the soil.
WARNING: The connector contacts (D) have sharp edges
for piercing the main low voltage cable. To avoid injury,
do not touch the metal contacts.
Use and Care Guide
LAUDERDALE
LED Low Voltage RGBW Smart Path Light
WARNING: Risk of electric shock. Do not install the light
within 10 ft. (3.05 m) of a pool, spa or fountain.
A
B
C
D
A
B
D
2
1
C
D

Summary of content (3 pages)