Item #1006 247 880 Model #LK1901 USE AND CARE GUIDE CEILING FAN LIGHT KIT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU light kit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Safety Information .....................................................2 Warranty.....................................................................2 Pre-Installation ..........................................................3 Key Hole Installation ..................................................5 Universal Installation.................................................6 Shade Installation ......................................................7 Maintenance .............................
Warranty (continued) The manufacturer does not warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.
Pre-Installation (continued) PACKAGE CONTENTS NET WEIGHT: 1.38 LBS C B Part A Description Quantity Fitter with socket assembled 1 B Glass shade 1 C LED bulb 1 INSTALLATION OPTIONS There are two different types of installations described below.
Key Hole Installation the switch housing 1 Removing 2 Connecting the wires cover □ □ Note: It only works for ceiling fans with 2.5" keyhole screws spacing. □ Remove the switch housing cover (1) from the fan by unscrewing the screws (2). You may keep this cover (1) for future use. Replace the two screws (2) but thread only halfway into the switch housing. □ Locate two single wires in the switch housing, white (gray on some models) and blue (red on some models) labeled “for light”.
Universal Installation the switch housing the cover to the light 1 Removing 2 Attaching cover kit □ Remove the switch housing cover (1) from the fan by unscrewing the side mount screws (2). □ Remove the plug (3) from the center of this cover by unscrewing or pushing out. You may discard the plug.
Shade Installation 1 Installing the bulb and shade □ Install the light bulb included (C). Do not over tighten. Use 9 watt LED maximum medium base light bulb. □ Attach the shade (B) to the light kit (A) shade holders by finger tightening the shade screws (BB). To avoid breakage, do not over tighten. BB In case the light pull chain is short at your location, please attach the pull chain extensions (CC) to the light pull chain. □ Restore electrical power. Installation is complete.
This LED light bulb complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This bulb may not cause harmful interference, and (2) this bulb must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the bulb.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.