Installation Guide

ManualsBrandsHampton Bay ManualsLightingSolar Powered Outdoor Mediterranean Bronze Integrated LED 3000K Warm White Landscape Post Cap Light

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

PACKAGE CONTENTS

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in

shaded areas as these areas will not allow the batteries to fully charge and will

reduce the nighttime operating hours for your light. Ensure that the installation

location is away from other nighttime light sources such as street or porch

lamps. These light sources may prevent your solar light from automatically

turning on.

Part Description Quantity

A Top cover 1

400mAh, LiFePO4, 14430 rechargeable

battery (pre-installed)

C Battery cover 1

D Housing 1

E 4” post adaptor 1

F 6” post adaptor 1

G Screw 2

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the

solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and

season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

Assembly and Installation

Preparing for installation

Installing the solar path light onto a post

□ Use two screws to attach post adaptor (E or F) rmly

onto the post.

□ Attach the housing (D) to the post adaptor (E or F).

1 2

Solar LED Post Cap

Use and Care Guide

Item #xxxx xxx xxx

Model #84044

□ FOR FIRST TIME USE: Remove the pull tab

between the top cover (A) and the housing (D).

4” Post 6” Post

Summary of content (2 pages)

PAGE 1
Use and Care Guide Solar LED Post Cap Item #xxxx xxx xxx Model #84044 PACKAGE CONTENTS A B D C PLANNING FOR A SUCCESSFUL ASSEMBLY E Part Read all instructions before assembly and installation. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
PAGE 2
Maintenance Replacing the battery A CAUTION: When replacing the battery, use one (1) 3.2V 400mAh LiFePO4 14430 rechargeable battery. C B IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. D NOTE: For best performance, replace with a rechargeable 3.2V 400mAh LiFePO4 14430 battery every 3 years or when performance diminishes. □□ □□ □□ Twist and remove the housing (D) from the top cover (A). Remove the battery cover (C). Replace the old battery with a fresh 3.