Item # Model # Lounge 65-518333B; Bench, FG19233S USE AND CARE GUIDE BRIAR RIDGE 3PC SECTIONAL SET BARE Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confdence you have placed in Hampto n Bay through the purchase of this Side table. We strive to continually create quality products designed to enhance your ho me.
Warranty TWO YEAR FRAME, WE AVE AND FABRIC LIMITED WARRANTY WH AT IS COVERED We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for two years. For glass table top we warrant 30 days from the date of purchase. WHA T IS N OT COVERED This w are not covered under this warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Pre-Installation( 255146) PACKAGE CONTENTS(CHAISE) C A H G F D B Part Description A B C D Backrest Panel Left Arm Panel (With Pre- Installed Levellers) Right Arm Panel (With Pre- Installed Levellers) Seat Panel E Supoport Bar Seat Cushion Left Back Cushion Right Back Cushion F G H E Quantity 1 1 1 1 1 1 1 1 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Installation ( 255146) 1 2 Attaching the chaise seat to the back Attaching the chaise armrest to the seat □ With the help of your adult partner, place Left Arm Panel (B) onto the assembled in Step 2 as shown above. Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. □ Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (C).
Installation ( 255146) 5 □ □ Attaching the sofa armrest to the back Inspect the Corner Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints. With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles. Adjust Pre-installed Levellers height for balance 6 □ □ □ □ □ Attaching the back to the seat Turn the Corner Chair right side up.
Pre-Installation( 255146) PACKAGE CONTENTS HARDWARE INCLUDED (1) Part (2) Description (3) Quantity (1) Bolt M6x35mm 7 (2) Screws M6x45mm 5 (3) Hex wrench 4mm 1 A B G G D F E C Part A B C D E F G Description Backrest Panel Right Arm Panel (With Pre- installed Levellers) Left Arm Panel (With Pre- installed Levellers) Seat Panel Support Bar Quantity 1 1 1 1 1 Seat cushion Right Back Cushion 1 1 6 HAMP TONB AY.COM Please contact 1-855-HD-HAMP TON for further assistance.
Installation ( 255146) 1 Attaching the chaise seat to the back □ Place the Left Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scraches or damages to the product. □ Step 2.1: Align the dowels of Support Bar (E) into the posiitions in the Left Arm Panel (C). □ Then, affix Support Bar (E) with Left Arm panel (C) by using Bolt ( 1 ) and Allen Key( 3). □ Step 2.2: Attach the Backrest Panel (A) onto Left Arm Panel (C) by using Bolts ( 1) and Allen Key( 3).
Installation ( 255146) 3 Attaching the chaise seat to the back □ Attach the Seat Panel (D) into the Left Chair as shown in picture above. □ Affix Seat Panel (D) with Left Chair by using Screws (2) and Allen Key (3). □ Note: Using Screws (2) from inside to outside of Seat Panel (D). 4 Attaching the armrest to the seat □ Inspect the Left Chair and make sure all parts are adequately connected.. □ In a sequential manner, tighten all Screws and Bolts at all joints.
Installation ( 255146) 5 Attaching the chaise seat to the back □ Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D). G G F 6 Attaching the armrest to the seat 9 HAMP TONB AY.COM Please contact 1-855-HD-HAMP TON for further assistance.
Pre-Installation( 255146) PACKAGE CONTENTS HARDWARE INCLUDED (1) Part (2) Description (3) Quantity (1) Bolt M6x35mm 7 (2) Screws M6x45mm 5 (3) Hex wrench 4mm 1 C1 A1 G1 G1 D1 F1 E1 B1 Part A1 B1 C1 D1 E1 F1 G1 Description Backrest Panel Right Arm Panel (With Pre- installed Levellers) Left Arm Panel (With Pre- installed Levellers) Seat Panel Support Bar Quantity 1 1 1 1 1 Seat cushion Right Back Cushion 1 1 HAMP TONB AY.
Installation ( 255146) 1 Attaching the chaise seat to the back □ □ □ □ Place Right Arm Panel (B1) onto the assembled frame from Step 2. Step 3.1: Align the dowels of Support Bar (E1) into the positions in the Right Arm Panel (B1). Then, affix Support Bar (E1) with Right Arm panel (C1) by using Bolt (1) and Allen Key (3). Step 3.2: Attach the Right Arm Panel (B1) onto Backrest Panel (A1) by using Bolts (1) and Allen Key (3). E1 A1 1 3 3 1 C1 S tep 2.1 S tep 2.
Installation ( 255146) 3 Attaching the chaise seat to the back □ Attach the Seat Panel (D1) into the Left Chair as shown in picture above. □ Affix Seat Panel (D1) with Left Chair by using Screws (2) and Allen Key (3). □ Note: Using Screws (2) from inside to outside of Seat Panel (D1). D1 4 Attaching the armrest to the seat □ Inspect the Left Chair and make sure all parts are adequately connected.. □ In a sequential manner, tighten all Screws and Bolts at all joints.
Installation ( 255146) 5 Attaching the chaise seat to the back □ Place Seat Cushion (F1), Left Back Cushion (G1) and Right Back Cushion (G1) to Seat Panel (D1). G1 G1 D1 F1 6 Attaching the armrest to the seat 13 Please contact 1-855-HD-HAMP HAMP TONB AY.COM TON for further assistance.
Pre-Installation( 255146) PACKAGE CONTENTS Z Y Part Y Z Description Table top Legs Quantity 1 4 HARDWARE INCLUDED (1) Part (2) Description (3) Quantity (1) Bolt M6x55mm 9 (2) Flat Washer M6xD1.5mm 9 (3) Hex wrench 4mm 1 14 Please contact 1-855-HD-HAMP HAMP TONB AY.COM TON for further assistance.
Installation( 255146) 1 Attaching the legs to the top □ Place the Table Top (Y) with its underside skywards onto a clean, soft surface to avoid any scratch or damage to the product. □ Affix loosely the Legs (Z), and into the mounting position at the corners of the Table Top (Y), using the Bolts (1) with Flat Washers (2)), with the Allen Key(3), as shown above. □ Repeat the same process with the other Leg (Z). CAUTION: When tightening these screws, tighten sequentially.
Care and Cleaning □ □ □ Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. When not in use, store furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water. Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions may shrink. Do not use bleach or solvents on fabrics.