Full Product Manual

ManualsBrandsHampton Bay ManualsLandscape LightingSolar Black LED Path Light (10-Pack)

Table Of Contents

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

PACKAGE CONTENTS

Assembly and Installation

NOTE: Do not use a hammer. If the ground is hard, use water to soften or a

trowel to loosen the soil.

Preparing for installation Install the solar light in the ground

□ Attach the post (E) to stake (F).

□ Push the assembly rmly into the ground.

1 2

Item #1005 698 124

Model #62010

□ Firmly slide the post (E) into the

solar housing (D).

□ FOR FIRST TIME USE: Twist

and remove the top cover (A)

from the housing (D). Remove

the pull tab between the top

cover (A) and housing (D).

□ Replace the top cover (A) on the

housing (D).

Use and Care Guide

Solar LED Path Light

PLANNING FOR A SUCCESSFUL ASSEMBLY

Read all instructions before assembly and installation.

Inspect each part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of purchase.

CHOOSING THE RIGHT LOCATION

Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce

the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light

sources may prevent your solar light from automatically turning on.

HOW SOLAR WORKS

The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the

solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and

season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.

BA D E FC

B - AA 1.2V 500 mAh Ni-Mh

rechargeable battery (pre-installed)

x 10

A - Top cover x 10 C - Battery cover

x 10

D - Housing

x 10

E - Post

x 10

F - Stake

x 10

Summary of content (4 pages)

PAGE 1
Item #1005 698 124 Model #62010 Use and Care Guide Solar LED Path Light PACKAGE CONTENTS A A - Top cover x 10 B C D B - AA 1.2V 500 mAh Ni-Mh C - Battery cover rechargeable battery (pre-installed) x 10 x 10 D - Housing x 10 E E - Post x 10 F F - Stake x 10 PLANNING FOR A SUCCESSFUL ASSEMBLY Read all instructions before assembly and installation. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
PAGE 2
Maintenance Replacing the battery A CAUTION: When replacing the battery, use one (1) 500 mAh NiMH AA 1.2V rechargeable battery. D IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable 1.2V NiMH battery of 500 mAh or greater every 3 years or when performance diminishes. □ □ □ C Twist and remove the housing (D) from top cover (A). Remove the battery cover (C).
PAGE 3
Artículo #1005 698 124 Modelo Núm.62010 Guía de uso y cuidado Lámpara LED solar para sendero CONTENIDO DEL PAQUETE A A - Cubierta superior x 10 B B - Batería AA (preinstalada) recargable de NiMH de 1.2 V, 500 mAH x 10 C D C - Cubierta de la batería x 10 D - Carcasa x 10 E E - Poste x 10 F F - Estaca x 10 PLANIFICACIÓN DEL ENSAMBLAJE EXITOSO Leer todas las instrucciones antes de ensamblar e instalar. Inspeccionar cada una de las partes o piezas para ver si fueron afectadas durante el envío.
PAGE 4
Mantenimiento Cómo reemplazar la batería A PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable AA de NiMH de 500 mAh y 1.2 V. D IMPORTANTE: Desechar las baterías de acuerdo con las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplazar con una batería recargable de NiMH de 1.2 V y 500 mAh cada 3 años o cuando el rendimiento disminuya. □ □ □ C Girar y quitar la carcasa (D) de la cubierta superior (A). Quitar la cubierta de la batería (C).