Item #1007 443 515 Model #52250 UL Model #LK-RPT USE AND CARE GUIDE ROCKPORT CEILING FAN LIGHT KIT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light kit. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents................................................................. 2 Pre-Installation..................................................................... 3 Safety Information................................................................ 2 Installation............................................................................. 4 Warranty................................................................................
Pre-Installation TOOLS REQUIRED Phillips screwdriver Electrical tape Wire cutter Step ladder PACKAGE CONTENTS A Part Description B C Quantity A Light kit fitter assembly 1 B Glass shades 3 C LED bulb, 6.5-watts maximum 3 HARDWARE INCLUDED AA Part AA Description Pull Chain Quantity 1 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Installation - Ceiling Fan Light Kit 1 2 Preparing the fan □ Remove the ceiling fan switch cup cover (D) from the ceiling □ □ fan assembly by removing the three mounting screws (BB). Remove the center plug (CC) from the switch cup cover (D). □ □ □ Preparing the light kit Remove the lockwasher (EE) and hex nut (DD) from the threaded nipple of the light kit fitter assembly (A) and save them for later use.
Installation (continued) 4 Installing the light bulbs and glass shades for fans with pull chains. E □ Remove the compressing ring (FF) from the threaded socket of □ □ □ A the light kit by turning the compressing ring counterclockwise until it unlocks. Insert the glass shade (B) into the light kit cowling and turn the compressing ring (FF) clockwise to tighten and secure the glass shade. Repeat for the remaining shades. With power off, screw the LED bulbs (C) into the sockets.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) the device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Artículo núm. 1007 443 515 Modelo núm. 52250 Modelo de UL núm. LK-RPT GUÍA DE USO Y MANTENIMIENTO KIT DE LUCES PARA VENTILADOR DE TECHO ROCKPORT ¿Preguntas, problemas, piezas faltantes? Antes de devolver a la tienda, llama al servicio al cliente de Hampton Bay entre 8 a.m. y 7 p.m. (Este), de lunes a viernes, o los sábados de 9 a.m. a 6 p.m. (Este). 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA Apreciamos la confianza que has depositado en Hampton Bay al comprar este kit de luces.
Tabla de contenido Tabla de contenido............................................................... 2 Preinstalación....................................................................... 3 Información de seguridad................................................... 2 Instalación............................................................................. 4 Garantía.................................................................................
Preinstalación HERRAMIENTAS NECESARIAS Destornillador Phillips Cinta de electricista Escalera de tijera Cortacables CONTENIDO DEL PAQUETE A Pieza Descripción B C Cantidad A Ensamblaje del soporte del kit de luces 1 B Pantallas de vidrio 3 C Bombilla LED de 6.5 W como máximo 3 HERRAJES INCLUIDOS AA Pieza AA Descripción Cadena del interruptor Cantidad 1 3 HAMPTONBAY.COM Llame al 1-855-HD-HAMPTON para mayor asistencia.
Instalación - Kit de luces para ventilador de techo 1 2 Cómo preparar el ventilador □ Retira del ensamblaje del ventilador de techo su cubierta de caja □ □ del interruptor (D) quitando los tres tornillos de montaje (BB). Retira el tapón del centro (CC) de la cubierta de la caja del interruptor (D).
Instalación (continuación) 4 Cómo instalar las bombillas y las pantallas de vidrio en ventiladores con interruptores de cadena E A □ Quita el aro compresor (FF) del portabombillas roscado del kit de □ □ □ luces girando aquel hacia la izquierda hasta liberarlo. Inserta la pantalla de vidrio (B) en la cubierta del kit de luces y gira el aro compresor (FF) hacia la derecha para ajustar y asegurar la pantalla de vidrio. Repite para las pantallas restantes.
¿Preguntas, problemas, piezas faltantes? Antes de devolver a la tienda, llama al servicio al cliente de Hampton Bay entre 8 a.m. y 7 p.m. (Este), de lunes a viernes, o los sábados de 9 a.m. a 6 p.m. (Este). 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para uso futuro. Este dispositivo cumple con la Parte 15 de las Normas FCC.