Item #1000 050 885 Model #16091 USE AND CARE GUIDE ADJUSTABLE HEIGHT FLOOR LAMP Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this floor lamp. We strive to continually create quality products designed to enhance your home.
Table of Contents Package Contents ....................................................................3 Assembly ....................................................................... 4 Care and Cleaning ........................................................ 6 Troubleshooting............................................................ 6 Service Parts ................................................................. 7 Table of Contents..........................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. NOTE: You can use a 100-Watt maximum 3-way type “A”bulb (not included) or 25-Watt maximum 3-way SBCFL bulb (25-watt 3-way SBCFL bulb included).
Assembly 1 □ □ Connecting the lower tube to the base 2 Connecting the remaining tubes □ □ □ Pull the excess power cord (L) through the base (K). Tighten the lower tube (J) onto the base (K). Pull the excess power cord (L) through the base (K). Tighten the middle tube (I) onto the lower tube (J). Tighten the upper tube (H) onto the middle tube (I). NOTE: Do not twist the power cord (L). NOTE: Do not twist the power cord (L).
Assembly (continued) 3 □ □ Connecting the small tube and handle to the arm assembly 4 □ Tighten the small tube (E) onto the arm assembly (A). Insert the handle (D) into the arm assembly (A) as shown and secure the two hex screws (G) by using the hex wrench (F). Connecting the small tube, handle and arm assembly to the upper tube Insert the small tube (E) into the upper tube (H) as shown and secure the three hex screws (G) by using the hex wrench (F). NOTE: Do not twist the power cord (L).
Care and Cleaning □ □ Use a dry, soft cloth to dust or wipe carefully. Do not clean with abrasive materials, bleach, or solvents. Troubleshooting Problem Possible Cause The bulb will not light. The bulb is burned out. Replace the light bulb. The power is off. Ensure the power supply is turned on. The cord is not plugged in. Ensure the cord is plugged into an outlet. The circuit breaker is off. Ensure the circuit breaker is set in the “ON” position. There is an exposed wire.
Service Parts 16091 Part A B C D E F G Description Part Arm Assembly Shade Socket Ring Handle Small Tube Hex Wrench Hex Screw H I J K L M 7 Description Upper Tube Middle Tube Lower Tube Base Power Cord 25W 3-way SBCFL bulb HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo #1000 050 885 Modelo #16091 GUÍA DE USO Y MANTENIMIENTO LAMPARA DE PIE DE ALTURA AJUSTABLE ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llame al Servicio al Cliente de Hampton Bay, de 8 a.m. a 6 p.m., hora estándar del Este, de Lunes a Viernes 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA Apreciamos la confianza que has depositado en Hampton Bay al comprar esta lámpara de piso.
Índice Contenido del Paquete .............................................................3 Ensamblaje .................................................................... 4 Mantenimiento y Limpieza........................................... 6 Solución de problemas ................................................ 6 Piezas de remplazo ...................................................... 7 Índice ..............................................................................2 Información de Seguridad.......
Pre-ensamblaje PLANIFICACION DEL ENSAMBLADO Lea todas las instrucciones antes de ensamblar. Para evitar dañar el artículo, ensámblelo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Usted puede usar como maximo bombillas de 100-Watt de 3-intensidades de tipo A ( no incluidas ) or maximo lamparas autobalastradas fluorescente compactas (LABFC) de 25-Watt de 3-intensidades (lamparas de 25-watt de 3-intensidades LABFC incluidas).
Ensamblaje 1 □ □ Conectando el tubo inferior a la base 2 Conectando los tubos restantes □ Hale el exceso del cable de alimentación (L) a través de la base (K). Apriete el tubo inferior (J) a la base (K). □ □ Hale el exceso del cable de alimentacion (L) a través de la base (K). Apriete el tubo intermedio (I) en el tubo inferior (J). Apriete el tubo superior (H) en el tubo intermedio (I). NOTA: No retuerza el cable eléctrico (L). NOTA: No retuerza el cable eléctrico (L).
Ensamblaje (continuación) 3 □ □ Conectando el tubo pequeño y la manija al ensamblaje del brazo de la lámpara 4 □ Apriete el tubo pequeño (E) en el ensamblaje del brazo (A). Inserte la manija (D) en el ensamblaje del brazo (A) como se muestra y asegúrelo con los tornillos hexagonales (G) usando la llave hexagonal (F).
Mantenimiento y Limpieza □ □ Use un paño suave para desempolvar o limpiar la lámpara cuidadosamente. No limpie con materiales abrasive, blanqueadores o solventes. Solución de problemas Problema Causa Posible Solución La bombilla no enciende. La bombilla está fundida. Reemplaze la bombilla. La electricidad está apagada. Asegúrese de que el suministro de electricidad esté encendido. El cable de alimentación no está enchufado. Verifique que el cable esté enchufado al tomacorriente.
Piezas de remplazo 16091 Pieza Descripción A B C D E F Ensamblaje del brazo Pantalla Anillo del receptáculo Manija Tubo pequeño Llave hexagonal G Tornillo hexagonal Pieza H I J K L M 7 Descripción Tubo superior Tubo intermedio Tubo inferior Base Cable de alimentación Lámpara de 25-watt de 3-intensidades LABFC HAMPTONBAY.COM Para obtener asistencia, llama al 1-855-HD-HAMPTON.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llame al Servicio al Cliente de Hampton Bay, de 8 a.m. a 6 p.m., hora estándar del Este, de Lunes a Viernes 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.