Manualshelf

Instructions / Assembly

ManualsBrandsHampton Bay ManualsLandscape LightingBronze Solar Outdoor Integrated LED Landscape Path Light 10 Lumens (6-Pack)
1234
HAMPTONBAY.com
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
Safety Information
Please note the following important safety notes:
1. The ground stake is sharp. Handle with care to avoid injury. 2. Do not dispose of battery in fire. Dispose of batteries
in accordance all local, state and federal regulations.
WARNING: Do not use hammer. If ground is
hard, use water to soften.
DANGER: Ground stake is sharp. Handle with
care.
IMPORTANT: Dispose of batteries in accordance
with all local, state and federal regulations.
PACKAGE CONTENTS
Use and Care Guide
LED Solar Pathway Light (6-Pack)
Important: Retain for future reference. Read carefully.
Item #1002 627 475
Model #10318
Part
Parts List
Description Quantity
A Solar Top Housing 6
B
Glass Lens 6
C Post 6
Choosing the Right Location
Your solar pathway light should be installed in an area that gets DIRECT SUNLIGHT.
Your solar pathway light will produce more hours of operation when installed in an
area which is free from cover, shade, or shadowing.
D Ground Stake
6
Remove Tab Before Use
Enlever Avant d'utiliser
Quitar La Lengueta Antes De Usar
How Solar Lights Work
Solar lights have a solar cell that converts sunlight into electricity. This electricity is used to
recharge the built-in battery each day. Since the solar lights are powered entirely by the
sunlight they receive each day, operating time will vary by specific location, daily weather
conditions, and season.
□ Remove the inverted ground stake (D)
stored inside the post (C).
□ Attach the post (C) to the ground stake (D)
by pushing the post (C) onto the top of
the ground stake (D).
□ Push the post-stake assembly into the
the ground.
CAUTION: The ground stake
is sharp. Be careful when
handling to avoid injury.
NOTE: Do not use a hammer.
If the ground is hard, use
water to soften.
□ For first time use, remove pull tab from the battery
compartment, located on the solar top housing (A).
A
B
□ Attach the solar top housing (A) on top of the glass lens (B)
using a clockwise twisting motion.
A
C
Do not press the top of
solar top housing (A). This can
damage the solar light.
□ Insert the solar light assembly (A) on top of the post (C).
11-800-7 1-1585
Made in China/Hecho en China/Fabriqué en Chine
Use Rechargeable Battery Only
Sólo Use Batería Recargable
Utilisez La Pile Rechargeable Seulement
ANi-MH A 1.2V 900mAh

Summary of content (4 pages)