Stationary-Unit 2121(Black) 2122(Silver) 2123(Walnut) Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms, or when unused for long periods of time. Clean only with dry cloth.
FOR UNITED KINGDOM: FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY This appliance is supplied with a molded 3-pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BSI1362. Check for the ASTA mark or the BSI mark on the body of the fuse.
thank you... for your purchase of Leslie® Speaker System. Your new Leslie Speaker culminates many years of reserch and dedication to the art of sound reproduction. This new Leslie Speaker has been designed to provide the utmost in musical enchantment, plus dependable service. The Leslie Speaker system sets revolutionary new standards of organ speaker performance, achieving heights of musical excellence never before considered possible.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS.............................. 2 CONTROL PANEL AND FUNCTIONS................................ 6 BASIC HOOK-UP WITH #2101 ......................................... 8 CONNECTING UNITS IN SERIES ..................................... 9 SPECIFICATIONS ......................................................... 10 SERVICE ......................................................................
CONTROL PANEL AND FUNCTIONS 21 POWER ON 1 Stationary-Unit INPUT 1 VOLUME OFF (REMOTE) 4 3 GAIN LINE MIC 0 PHONE: Hi-Z INPUT 2 INPUT 3 VOLUME VOLUME 8 0 TIP: RETURN RING: SEND 10 9LINE : 0 ! LINE 10 TONE BASS -10 REMOTE 2 MASTER TREBLE a # +10 & -10 +10 VOLUME $ 0 10 ( LINE OUT +5 ON POWER ON % PUSH OFF 7 10 5 6 XLR: Lo-Z PHANTOM (XLR ONLY) INSERT b -5 TW.
8 INPUT 2 Volume Control This Rotary Control adjusts the level of the signal from the INPUT 2 jack. 9 INPUT 2 Jack Use this jack to connect to an external sound device. The jack will accept a PHONE (1/4" high-impedence) connection only. : INPUT 3 Volume Control This Rotary Control adjusts the level of the signal from the INPUT 3 jack. ! INPUT 3 Jack Use this jack to connect to an external sound device. The jack will accept a PHONE (1/4" high-impedence) connection only.
BASIC HOOK-UP WITH #2101 8 POWER ON u Leslie #2101 and #2121 POWER Make sure the power on the Leslie Speakers as well as on the connecting instrument(s) is "OFF." POWER ON OFF OFF OFF (REMOTE) OFF ON connecting Instrument(s) POWER ON Leslie #2101 21 v FUNCTION Fast Speed [Prog. Ch] Rotary-Unit OFF (REMOTE) Fall Time [Exp Rx] B r a k e T i m e [S/F Type] Rotor Direction /Mic Angle Horn C h a r a c t e r / M i c D i s t a n c e [S/F Cont.Code] [DumpOut] C r o s s O v e r F r e q .
CONNECTING UNITS IN SERIES 9 Using Additional Stationary-Units for Maximum Sound Coverage. Connect additional Stationary-Units using the INPUT 2 jacks as shown below. To insure uniform quality of sound, set the INPUT 2 Rotary Controls on all the units to the center (12 o'clock) position.
SPECIFICATIONS Type Speaker Units Frequency Range Maximum SPL Dimension Weight Color Accessories Amplifier Output Crossover Frequency Controls Terminals Indicator Power Powered Speaker, 2-way, Bass-reflex LF: 38cm Cone HF: Compression driver 40Hz - 15kHz 121dB SPL (1m) 506 x 763 x 506mm 39kg Black(#2121), Silver(#2122), Walnut(#2123) AC-Cord, LI-40 Cable x 2, DCC-2 Cable LF: 150W at 400Hz HF: 50W at 1000Hz 700Hz INPUT 1: PHANTOM, GAIN, VOLUME INPUT 2: VOLUME INPUT 3: VOLUME TONE: BASS, TREBLE MASTER:
SERVICE 11 Hammond maintains a policy of continuously improving and upgrading its instruments and therefore reserves the right to change specifications without notice. Although every attempt has been made to insure the accuracy of the descriptive contents of this Manual, total accuracy cannot be guaranteed. Should the owner require further assistance, inquiries should first be made to your Authorized Hammond Dealer.
HAMMOND SUZUKI, LTD., Hamamatsu, Japan Printed in Japan 00457-40068 V1.