User's Manual

Title FM Wireless transmitter

Item No. HN - 1301

Function. Be able to transfer sound sources, like CD, MD, MP3 to FM receiver of

motor vehicle through the transmitter.

Operating Instruction

：

1. Open the bottom of the transmitter and insert into a “AAA” size battery (Please

note the polarity symbols)。

2. Slide the power switch to the ON position on the right side, the LCD screen will

activate.

3. Pull up the audio plug on the top of the rear of the transmitter, and connect the

plug to output terminals of sound sources like CD, MD, and MP3, etc.

4. Choose the FM receiver of the automobile, adjust its frequency to the trans mitter,

or turn the TUNE knob on the right of the trans mitter, (turn”＋” to increase or

turn”－” to decrease the frequency), and then the FM receiver will automatically

scan and you may enjoy the sound sources.

5. Slide the power switch to the OFF position on the right side; the LCD screen will

be disabled.

PAGE 1
Title FM Wireless transmitter Item No. HN- 1301 Function. Be able to transfer sound sources, like CD, MD, MP3 to FM receiver of motor vehicle through the transmitter. Operating Instruction： 1. Open the bottom of the transmitter and insert into a “AAA” size battery (Please note the polarity symbols)。 2. Slide the power switch to the ON position on the right side, the LCD screen will activate. 3.
PAGE 2
Product Parameters: 〈1〉Power Voltage: 1.5V 〈2〉Frequency Range: 88.1MHZ－107.9MHZ 〈3〉Transmit Power: 16mW 〈4〉Stereo Cross talk: ≧-60dB 〈6〉Optimum Input Signal: 0.5mv 〈7〉Signal to Noise Ratio: ≧68dB 〈8〉Frequency Drift: ≦0.05MHZ 〈9〉Consumption Current: 59mA±3mA 〈10〉Dimension: 58mm×48mm×15mm Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.