User’s Manual DAC-51 Universal Digital to Analog Audio Decoder DSP Supports Stereo & Surround Rev N/C
Introduction The DAC‐51 Digital to Analog Audio Decoder uses 24‐bit audio DSP and 192KHz DACs to convert virtually any type of digital audio input to stereo output. It supports uncompressed two‐channel PCM as well as compressed multi‐channel bit‐stream audio (Dolby Digital AC‐3 Dolby Pro Logic, DTS) and provides two channels of analog outputs both on RCA as well as 3.5mm headphone jack.
channels to 2‐channel stereo for easy connection to entertainment devices. Both TOSLINK optical, coaxial digital SPDIF inputs are provided (switch selectable by the user) Features Converts PCM or DTS/ AC3 digital source audio to analog 2.
Specifications Input ports: 1xToslink SPDIF, 1xCoaxial RCA Output ports: 2xRCA (LR), 1x3.5mmPhone jack Signal to Noise Ratio: 120db Channel Separation: 85db Frequency Response: 20Hz ‐20KHz Dimensions: 75x55x20 mm (2.95x2.16x0.79 inch) Weight: 40g (1.
