User manual- H2 1 Last updated: 3/ 25/ 2021
Contents Preface………………………………………………………………..1 Part Ⅰ: Connection illustrated…………………………………… …..4 Part Ⅱ: Configure network…………………………………………...4 Part Ⅲ: Encoder Functions …………………………………………6 Status bar ……………………………………...…………………..6 Adapt network …………………………………………...………..7 Operation mode ………………………………...……..…………..8 Encoding………………………………...………...…..…………..8 TS Info and OSD ………………………………………...………..9 Decoding…………………………….…………………...………..10 Transcoding ……………………………………………...………..11 Video mixing ………………………………………….....………..
Preface Thank you for supporting HAIWEI, who are the leading developer of various video processing hardware for different kind of video transmission scenarios like OTT, IPTV, Broadcasting, Video streaming, News gathering, medical video processing and so forth.
Part Ⅰ: Connection illustrated Part Ⅱ: Configure network DHCP suggested for new customer or will use it in different networks, so network configuration can be ignored if parameter of the stream configured.
1- Enter network setting 2- Enter “Properties” 3- Choose IPv4 4- Enter current IP address and DNS (if don’t know the DNS, use 8.8.8.8) 5- Add another 192.168.1.x based IP address. 6- Then reboot the encoder on the UI of “System”option.
Part Ⅲ: Encoder Functions 1- Status Bar * The detected video information, Preview and streaming URL display here, the Preview function is based on HTML5, it means HLS need to be enabled before using this function 6
2- Adapting the encoder network to your own Configuring network became necessary before starting if streaming to platform required, and the Default DNS should set 8.8.8.
2- Choosing operation mode There are 5 modes can be selected from 1- Encoding Only 2- Decoding Only 3- Encoding+ Decoding 4- Transcoding 5- Video mixing 3- Setting up Encoding Choose different channel to configure 2* Main+ 2* Sub Use H.265 or H.264 for streaming Choose H.
4- Editable TS info Video ID= Stream ID Audio ID= video ID+1 5- OSD 9
6- Decoding Decoding function will be useful while using those modes Decoding Encoding+ Decoding Video Mixing Transcoding There are three different feeds can be decoded from URL to P2P and SDK 1- URL RTSP, RTMP, UDP, HLS, HTTP 2- P2P From another P2P encoder, see configuration here 3- SDK This function is used for a pair of encoder from us, and can be used under intranet only. Refresh Click to get the P2P ID On the intranet, the ID can be input Under P2P decoding mode.
7- Transcoding This sector will be functional under Transcoding mode, the functions listed here are same to the See details on the relevant page by clicking here 11
Activate Transcoding ① Turn the Transcoding function on on the ② Set up inputting feeds by setting up from First to fourth ③ Set up information of the transcoded feeds by setting up parameters on the Tips: The H2 supports 4 channels transcoding in 2 different bitrates for each, decoding feeds “First” is meant “First” on the Source list on transcoder info 12
8- Video Mixing This sector will be functional under Mixing mode, the functions listed here are same to the See details on the relevant page by clicking here 13
Activate Video Mixing ① Turn the Mixing function on on the ② Set up inputting feeds by setting up from First to fourth ③ Set up information of the mixed feeds by setting up parameters on the ④ Adjust the pattern of the displaying feeds by re-locate the coordination of each feed, here is an example 1920 1280 0 The size and its location of the items are 1080 600 400 D1 H1 OSD D2 H1- 1280*1080, 0* 0 D1- 640* 400, 1280* 0 OSD- 640* 480, 1280* 400 D2- 640* 200, 1280* 680 14
9- Setting up HDMI output This function is designed for setting up the pattern of the feeds that output from HDMI loop through HDMI MODE: One Split Four Split Nine Split 15
10- Changing audio setting Audio encoding can be configured on the Extended function.
11- System settings 1- Timing reboot 2- Firmware version In general, 168 hours (7 days) timing reboot The firmware will be updated if there is new suggested for TCP connection. function added, Bugs fixed and so forth, 3- Upload files upload logo, firmware please provide us current version before upgrading the encoder Tips: if need transparent logo, black/ grey background required, to make the OSD function work, 24 Bits in BMP format required. File names for different OSD Encode:logo01.bmp-logo04.
Part Ⅳ: Operation Guidance 1) HTTP-RTSP- RTMP pull- HLS- UDP Copy the address and open it with VLC- streaming- network- fill the URL ( Except RTMP push) Such as HTTP： WEB management→ HDMI Main→ Enable HTTP/ RTPS→ Apply→ Status( find the URL) → VLC→ fill the URL→ Done 18
3) RTMP (Push/ pull)- HLS URL mode Copy the CORRECT RTMP address from the server or platform and directly paste it on the RTMP filed, then “Enable” the RTMP function. IP mode Copy the CORRECT RTMP address from the server or platform, separately input it like following image, then “Enable” the RTMP function.
4) SRT The encoder supports SRT caller and listener mode, here we will demonstrate how to set up each mode on the encoder and decoder side 1- Listener Mode Encoder Decoder * Enter the IP of the encoder and its port on the decoder side 2- Caller Mode Encoder Decoder * Enter the IP of the Decoder and its port on the Encoder side 20
Part Ⅴ: LiveX APP—LiveX, control the encoder and record the video at anywhere, any network, any device. Android/ IOS: download it on its apple/ Google play store Video about LiveX on YouTube: https://www.youtube.
No Question 1 How to connect encoder? 2 How to access to encoder? Solution Connect encoder with computer directly via net cable. Set up one constant IP including IP: 192.168.1.1**, then access to 192.168.1.168 on PC browser. Copy the streaming URL to VLC - Media- Open network stream- paste, enjoy it. 3 How to watch the TS stream from the encoder? 1 Enable RTSP on the user interface, and watch it on VLC with same step to last question. 2.
Part Ⅵ: Contact HAIWEI 深圳海威视讯技术有限公司 Shenzhen Haiwei vision technology Shenzhen head office(R&D, production): 6th floor, block B, Hua Feng financial port, Xin'an 6th Road, BaoAn District, Shenzhen CN address: 深圳宝安82区新安六路华丰金融港B座6层 Guangzhou (Business center): #403-404, 4th Floor, No.
