Introduction The Blu Stat Smart WiFi Thermostat allows you remotely control and schedule your home's temperature with ease. It can support most conventional heating and cooling systems with up to 3 heating and 2 cooling stages. Key Features By connecting to the app, you can control your cooling and heating systems from anywhere. Control your temperature. Set energy saving modes. Create timed schedules to automatically set your thermostat and home temperature.
Main Screen WiFi Shows current WIFI status Set temperature Shows current set temperature Room temperature Shows current room temperature ECO mode Shows current ECO mode status TIMING mode Shows current TIMING mode status Humidity Shows current humidity Specifications Temperature Sensor SHTICK Accuracy +1°C Temperature Range Heating: 40°F — 90°F (4°C 32°C) Cooling: 50°F — 99°F (10°C37°C) Rar! 5~95% RH (non condensing) Screen Resolution 320x480 TFT LCD Power Supply AC 24V Size 112x112x20 mm Housing Material P
Thermostat Functions Functions Descriptions System Modes Off, Heat, Cool, Auto, Emergency Fan Auto, On Task Modes Timing, Eco, Hold Room Temperature Display Detects the current room temperature. Humidity Display Detects the room humidity level Compressor Protection Controls the start and stop time intervals of the compressor. WiFi Connection Direct WiFi connection for updates and app access. Timing Programming User can preset a temperature value or range to start at a certain time and day(s).
What's Included ° eras] Batista Smart Wall Anchors Screws Wire Label Thermostat (x2) {x2} Stickers Additional tools you'll need: ® Screwdriver ® Pen or pencil (to mark drilling holes) Additional tools you MIGHT need: ® Needle-nose pliers ® Wire stripper ® Drill and drill bit Compatibility ® Compatible with most heating, cooling and heat pump systems. ® Required: 24 VAC power ("C” wire). ® Does not work with electric baseboard heat(120240V). ® Does not work with millionth systems.
WiFi Requirements The Blu Stat requires 2.4GHz for WiFi connectivity. Thesis a standard home WiFi router. You will need your WiFi name and password when connecting your Blu Stat thermostat to your home WiFi network. Installation The Blu Stat WiFi Thermostat should be mounted in a suitable location. It is recommended to install the thermostat about 5 ft above the floor and in an open area with good air circulation.
1. Turn OFF power. Important: You MUST shut off the power at the breaker box that controls your heating/cooling system. 2. Test to make sure the power is off. Sometimes there's some residual power in the thermostat so it could take up to 5 minutes for your old thermostat to turn completely off. 3. Remove your old thermostat. Most thermostats allow you to just pull off the unit from its wall plate.
plate connectors. Make sure the wires do not fall back into the wall as they may be difficult to retrieve. Then, unscrew the wall plate from the wall to remove it. 8. Insert the wall anchors (optional). You may choose to use the wall anchors to insert into the wall first before applying the new wall plate. First, hold the Blu Stat wall plate onto the wall where you'll be installing it and use a pen or pencil to mark the screw holes on the wall.
10. Connect your R wire(s). Depending on your heating/cooling system you may have an R, Rh, and/or Re wire(s). The Blu Stat thermostat can accommodate for these three wires but some configurations require a “jumper” to connect the power. The jumper switch is located on the back of the thermostat as shown in the image below. To determine the switch position, use the follow chart as a guide.
Eb whe Haman Rh ion Fir EE EE Tum the switch OFF if: Hiss Emma a] Hove 11. Connect the remaining wires. Match your wires to the appropriate connectors on the wall plate. You will be connecting to the same labeled terminals as your old thermostat connections. You may use the images below as a reference according to your heating/cooling system. Note: Your wire colors may differ from the images shown below.
12. Attach your Blu Stat WiFi Thermostat. Firmly attach the Blu Stat thermostat to the wall plate. 13. Turn the power back ON. Turn ON the power at the breaker box. 14. Follow on-screen instructions. Once the power is back on, there will be a sequence of instructions to connect the WiFi, enter zip code, and app pairing.
App Pairing 1 From the main screen, tap on the settings icon. Follow the app download 9 ans @ ee HIVE” app from. a C © instructions on this screen. wipe UP to get to the 2 App Pairing. Lo Sag Te Liege tol sail Ce Create your account and dl pair the thermostat device.
Symbol Guide Symbol Name Description @ senseless Soto lone ola a Main Go to Main Screen 3 Settings Enter settings screen i ECO ECO mode activation ® Turning Timed schedules for preset temp Se Fan Auto Fan runs automatically Fan On Fan turns on aaa 15
Operations 1) System mode selection In the main interface press & to switch the system mode in order of OFF, COOL, HEAT, MERE (heat pump only) and AUTO. When OFF is selected, the thermostat turns off all relay outputs. Note that not all homes will have every mode option available and depends on your VAC system. The thermostat determines which modes are active according to the VAC system type.
mode will maintain the room temperature to stay within the preset cooling or heating temperature range. The range can be adjusted within the Parameters settings. Hold mode This mode will maintain the current set temperature. in the hold mode, no icon is displayed in the main interface. Hold mode automatically activates When TINGING and ECO are off. 4) Ean mode selection In the main interface press switch the fan mode in order of AUTO and ON.
a a Le WiFi retard. Select your WiFi network name, enter your password, and connect to the WiFi network. Also note that the WiFi icon “2 in the main interface screen will appear when WiFi is connected. Parameters Setting The Parameter setting interface allows you to adjust your thermostat with numerous different features and settings. TIMING Setting AIMING schedule will activate the thermostat at the preset time and will keep the room temperature within your preset range.
linen] Chloe aU Lela lassie EDIT SCHEDULE Sir Time. 6:30 Stine Tap ® to add a new timer; tap > to delete a timer, Tap the schedule to edit it. You may modify the time, days of the week, and adjust the heat and ecol temperature ranges. Note that up to 12 timers can be set.
Key Lock Each time you enable the key lock you will need to enter a new password. This password will save until Key Lock is disabled. When the Standby parameter is set to “Never” and the Key Lock is enabled, the Key Lock will activate once the thermostat has been idle for 30 seconds. When the Standby time is set to any other time value and the Key Lock is enabled, the main interface will lock immediately.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Hamlin Energy Technology Inc. Add: Hullabaloo International Information Industry Base, Chang ping District, Beijing, 102208, P.R.China Tel: +86 10 52816622 10 52816633 E-mail: hailstorm/ Version 1.