HAIFUAN D6300 Series User Manual
Technical Parameters Product Type HFAD6300-R, HFAD6300-L , HFAD6300-FR, HFAD6300-F Dimensions 6.1”*2.55”*4.92”(155*65*125MM) Material Zinc Alloy Weight 4.4LBS (2KG) Operating Voltage DC6V，4* 1.5V“AA”Alkaline Batteries Static Current ≤20µA Dynamic Current ≤200mA Ways to open Password, Mechanical key, M1 Card, Remote control, Fingerprint User Capacity Different for each model, check 3.1 for details Backset 2 3/8”and 2 3/4” both available (60mm or70mm) Door Thickness 1.2”-2.
Part 2: Installation Instructions 2.1 Drilling holes 1、 Drill holes according to the drilling template 2、 Drill holes on the door frame to install strike plate 2.2 Install latch and strike plate 1、 Fix the lock on the door broadside with two screws 2、 Fix the plastic case and strike plate on the door frame with two screws 2.
2.5 Install back panel 1、 Remove battery cover 2、 Connect data line of the front and back panel 3、 Fix the back panel with 3 fixing screws. 4、 Make adjustment if necessary, fasten the screws 2.6 Install batteries 1、 Put 4 AA batteries into the battery case and pay attention to the directions. 2、 Close the battery case and fix it with screws. 3、 Installation finished. 2.7 Test after installation 1、 The door can be opened when turn on the back plate handle.
3 Operation Instruction 3.1 Outline Admin: code (fingerprint, card or remote control cannot be used as admin) User: card, code(6-10digits), fingerprint(fingerprint version), remote control(remote control version) User Capacity: HFAD6300-R, 1 admin code, 100 codes, 800 cards, 120 remote controls HFAD6300-L, 1 admin code, 100 codes, 800 cards, HFAD6300-FR, 1 admin code, 100 codes, 150 fingerprints, 120 remote controls HFAD6300-F, 1 admin code, 100 codes, 150 fingerprints, 3.
Users can change their codes by their own *+5+# Input code+# (don’t turn handle) New code+# Success Delete Single user： * Admin Code+# “ ”+“#” 3 Input Code/Fingerprint/ 1 Remote control/Card Delete All users： * Admin Code+# “ ”+“#” All user delete successful 3 2 0 1 1-start ，2- forbid 0 2 1-single user，2-double users Passage Mode setting * Admin Code+# “ ”+“#” Verification Mode setting * Admin Code+# “ ”+“#” 3.
4 Others Admin User can set a new Admin code by revision. After the revision, the new Admin will replace the old one. (the new Admin code will replace the old one) When entering the Passage Mode, the motor will not lock the door automatically after unlocking by code/fingerprint, and everyone can unlock the door by turning the handle. Press # to cancel the Passage Mode. When inputting the password, please press # for confirmation, and press * for elimination.
