User's Manual

ManualsBrandsHaier US Appliance Solutions ManualsElectronicsWi-Fi/Bluetooth Combo Module

Regulatory Module Integration Instructions

This Wi-Fi/Bluetooth Combo Module has been granted modular approval for mobile applications.

OEM integrators for host products may use the module in their final products without additional

FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise,

additional FCC / IC approvals must be obtained.

 The host product with the module installed must be evaluated for simultaneous

transmission requirements.

 The user’s manual for the host product must clearly indicate the operating requirements

and conditions that must be observed to ensure compliance with current FCC / IC RF

exposure guidelines.

 To comply with FCC / IC regulations limiting both maximum RF output power and human

exposure to RF radiation, use this module only with the included onboard antenna.

 A label must be affixed to the outside of the host product with the following statements:

Product Name: Wi-Fi/Bluetooth Combo Module

Contains FCCID: ZKJ-WCATB005

Contains IC: 10229A-WCATB005

The final host / module combination may also need to be evaluated against the FCC Part 15B

criteria for unintentional radiators in order to be properly authorized for operation as a Part 15

digital device.

Summary of content (6 pages)

PAGE 1
Regulatory Module Integration Instructions This Wi-Fi/Bluetooth Combo Module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained.  The host product with the module installed must be evaluated for simultaneous transmission requirements.
PAGE 2
Device Classifications Since host devices vary widely with design features and configurations module integrators shall follow the guidelines below regarding device classification and simultaneous transmission, and seek guidance from their preferred regulatory test lab to determine how regulatory guidelines will impact the device compliance. Proactive management of the regulatory process will minimize unexpected schedule delays and costs due to unplanned testing activities.
PAGE 3
Simultaneous Transmission Evaluation This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01,D03 (for laptop, notebook, netbook, and tablet applications).
PAGE 4
OEM Instruction Manual Content Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product (OEM-specific content is displayed in italics.) Operating Requirements and Conditions: The design of Wi-Fi/Bluetooth Combo Module complies with U.S. Federal Communications Commission (FCC) guidelines respecting safety levels of radio frequency (RF) exposure for Mobile devices.
PAGE 5
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Contains IC: 10229A-WCATB005 Information Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence.
PAGE 6
SIMPLIFIED EU DECLARATION OF CONFIRMITY The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, Haier US Appliance Solutions, Inc. declares that the radio equipment type Wi-Fi Module is in compliance with Directive 2014/53/EU.