Owner’s Manual Precision Cooking Probe JXSOUSV1 For Use With 30” and 36” Induction Cooktop Models: ZHU30RSJSS ZHU36RSJSS ZHU30RDJBB ZHU36RDJBB CHP9530SJSS CHP9536SJSS 49-80776 06-15 GE monogram.
Consumer Information Precision Cooking Probe Introduction Thank you for purchasing the new Precision Cooking Probe for use with your GE Café or Monogram Induction Cooktop! This device works in conjunction with your induction cooktop to accurately control the temperature within ±1 degree Fahrenheit. You can select any temperature within the range of 85°F to 200°F. This will enable you to perform such cooking operations as slow cooking, simmering liquids, and even sous vide cooking.
Consumer Information Precision Cooking Probe If you received a damaged precision cooking probe Immediately contact the dealer (or builder) that sold you the precision cooking probe. Save time & money Read this manual. Inside you will find many helpful hints on how to use and maintain your precision cooking probe properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your precision cooking probe.
IMPORTANT SAFETY INSTRUCTIONS WARNING! Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury or death. • This device shall only be used for its intended purpose as described in this Owner’s Manual. • Do not use a flammable liquid as a bath fluid; do not use with any non-food products.
Warranty Precision Cooking Probe YOUR MONOGRAM PRECISION COOKING PROBE WARRANTY Staple sales slip or canceled check here. Proof of original purchase date is needed to obtain service under warranty.
Consumer Services Jay and Peter, Do you want this page? Precision Cooking Probe With the purchase of your new Monogram appliance, receive the assurance that if you ever need information or assistance IURP *( ZH·OO EH WKHUH $OO \RX KDYH WR GR LV FDOO³WROO IUHH GE Answer Center ® In the USA: 800.626.2000 Whatever your question about any Monogram major appliance, GE Answer Center® information service LV DYDLODEOH WR KHOS
Using Your Cooktop Precision Cooking Probe Kit Contents Low Battery Indicator Bluetooth® Indicator Probe Power Button USB Micro Port (for charging) Precision Cooking Probe Button Ethernet Cable Status Indicator Bluetooth® Module I need a better picture 3 foot USB Micro Cable Owner’s Manual Precision Cooking Probe JXSOUSV1 For Use With 30” and 36” Induction Cooktop Models: ZHU30RSJSS ZHU36RSJSS ZHU30RDJBB ZHU36RDJBB CHP9530SJSS CHP9536SJSS 49-80776 06-15 GE monogram.
Using Your Cooktop Precision Cooking Probe Initial Setup 1. Charge the Precision Cooking Probe using the provided Micro USB cable and a computer or USB charger (not included). 2. Locate the input connector jack on the bottom side of the cooktop. It can be found in the front left corner. 3. Connect the Bluetooth® Module. Stick the module to the bottom of the cooktop. It contains magnets which will allow it to adhere to the bottom of the cooktop. 4.
Using Your Cooktop Precision Cooking Probe Precision Cooking Mode Operation 1. Add liquid. Select stockpot and add liquid. If cooking sous vide, fill the pot with water to create a water bath. Place stockpot on largest induction burner. 2. Add the Precision Cooking Probe. Attach the Precision Cooking Probe to the side of the stockpot, preferably towards the top. Position the Precision Cooking Probe such that at least half of the probe tip is submerged in the liquid. 3.
Using Your Cooktop Precision Cooking Probe Precision Cooking Mode Operation 5. Set the desired cook temperature (85°F to 200°F). The cook temperature is displayed on the Kitchen Timer display. Touch the or V arrow pads to select the desired cooking temperature. The Precision Cooking Mode will begin automatically. NOTE: The Kitchen Timer will be disabled while running in Precision Cooking Mode. 6. Wait for the liquid to heat up. The cooktop will begin to heat the liquid to the desired temperature.
Care and Cleaning Precision Cooking Probe Care and Cleaning First unplug and power off the Precision Cooking Probe, then wipe the probe surface with a clean, damp cloth as needed. A mild detergent may be used on the metal probe tip. DO NOT submerse or hold under running water. IMPORTANT: • Allow Precision Cooking Probe to cool before cleaning. • Unplug and power down devices before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Notes Precision Cooking Probe 13
Notes Precision Cooking Probe 14
Notes Precision Cooking Probe 15
Before You Call For Service Precision Cooking Probe Questions? Before you call for service… Problem Possible Cause Probe doesn’t turn on Probe not charged Not pressing probe power button for 3 seconds Cooktop does not enter Using wrong burner Precision Cooking Mode Not touching large burner power icon for 3 seconds Bluetooth® Module not plugged into cooktop Probe and Bluetooth® Module not paired Burner enters Precision User not completing two-step on Cooking Mode but does not heat &RRNWRS WXUQV Rȹ ZKLO