User's Manual

Bluetooth 4.0 BLE Module

Section 1:Overview

The BB1736-25 is a Bluetooth 4.0 module based on the Broadcom BCM20736 specification basic

rate-compliant stand alone baseband processor with an integrated 2.4GHz transceiver.

The module includes Flash , crystal and PCB antenna.

1.1 Applications

The following profiles are supported in ROM:

• Battery status

• Blood pressure monitor

• Find me

• Heart rate monitor

• Proximity

• Thermometer

• Weight scale

• Time

Additional profiles that can be supported from

RAM include:

• Blood glucose monitor

• Temperature alarm

• Location

1.2 Features

• Bluetooth low energy (BLE)-compliant

• Supports Adaptive Frequency Hopping

• Excellent receiver sensitivity

• 10-bit auxiliary ADC with nine analog channels

• On-chip support for serial peripheral interface(SPI,UART)

(master and slave modes)

• Programmable output power control

• Integrated ARM Cortex™-M3 based microprocessor core

• Automation Profile

• Support for secure OTA

• On-chip power-on reset (POR)

• Integrated low-dropout regulator (LDO)

•

On-chip

software

controlled

power management unitq

• Package type:

20.5*12.5*2mm FR4 PCB with 25 pads located around the perimeter.

PAGE 1
Bluetooth 4.0 BLE Module Section 1:Overview The BB1736-25 is a Bluetooth 4.0 module based on the Broadcom BCM20736 specification basic rate-compliant stand alone baseband processor with an integrated 2.4GHz transceiver. The module includes Flash , crystal and PCB antenna. 1.
PAGE 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.