User's Manual

NEWFI MOBILE DIAGNOSTICS

Android & IOS

The NewFI mobile diagnostic tool is capable of obtaining information from an appliance for service diagnostics and deliver

new software updates to the appliance. The system consists of a Bluetooth module (referred to as the Bluebean), a RJ45

cable to connect to the appliance and an Android or IOS phone or tablet. The Bluebean transmits information to and from

the appliance to the phone/tablet via Bluetooth and the phone/tablet transmits back to the appliance via Bluetooth or to the

cloud (Amazon Web Service) via Wi-Fi or 4G to communicate analytic data and download updates.

PAGE 1
NEWFI MOBILE DIAGNOSTICS Android & IOS The NewFI mobile diagnostic tool is capable of obtaining information from an appliance for service diagnostics and deliver new software updates to the appliance. The system consists of a Bluetooth module (referred to as the Bluebean), a RJ45 cable to connect to the appliance and an Android or IOS phone or tablet.
PAGE 2
BLUEBEAN HARDWARE Green / Blue Flashing & Red Solid – Not paired Green Flashing & Blue/Red Solid – Paired and connected Red / Green Flashing ERROR USB Power RJ45 Power and Data 12 V Power Not Currently Used
PAGE 3
GE Appliances a Haier company Instruction Sheet PCB Assembly NewFI Mobile WX Parts Included: • NewFI 2.0 / Bluebean 2.0 • Ethernet Cable • Instruction Sheet Important Notice Caution Although not recommended, if using a 120V adapter or a 12V 2.5mm barrel jack AC converter to power your device, use the recommended parts below. 1. 120V adapter: SWI12-12-N-P6 from CUI. The datasheet is available here: http://www.mouser.com/ds/2/670/swi12-n-607261.pdf 2. 12V 2.