Welcome to use C2000 mobile phone from [Company] Technologies Co.., Ltd.
Copyright©2007[Company] Technologies Co.., Ltd All Rights Reserved Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission as [Company] Technologies Co.., Ltd. Statement The contents of this manual maybe different with the cell phone please according the cell phone. [Company] reserves the right to revise this document or withdraw it at any time without prior notice.
Safety Precautions Please read these simple guidelines. Not following them may be dangerous or illegal. For further information, see the section of “Warnings and Precautions”. Do not switch the phone on when Mobile Phone use is prohibited or when it may cause interference or danger. Do not place your phone and its accessories in containers with strong electromagnetic field. Obey all local laws. Always keep your hands free to operate the vehicle while driving.
Follow any restrictions. Wireless devices can cause interference in aircraft. Keep the phone and all its parts, including accessories, out of the reach of small children. Use only approved batteries and chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its lift. Only qualified personnel should service the phone or install the phone in a vehicle.
Contents 1 Getting to Know Your Phone....................................................................... 1 Packing list ......................................................................................................................1 Basic specification ...........................................................................................................1 Mobile phone appearance ...............................................................................................
Change the input method .............................................................................................. 14 5 Contacts...................................................................................................... 15 Add new......................................................................................................................... 15 List .................................................................................................................................
Templates ...................................................................................................................... 25 Delete messages ........................................................................................................... 25 Message setting............................................................................................................. 26 Memory status ...............................................................................................................
Phone info ..................................................................................................................... 41 9 Profiles........................................................................................................ 42 10 Fun and Utilities ....................................................................................... 44 Alarm ............................................................................................................................. 44 Scheduler ....
1 Getting to Know Your Phone Packing list Your phone package box contains the following items: z TBD z TBD z TBD Basic specification z z z z Size: 99.6mm [L] ×42mm [W] ×14.0mm [H] Weight: TBD (including 800mAh Li-polymer battery) Standby Time: about 115 hours Talking Time: about 3 hours Notice: Standby time is the handset continuous working time without making phone calls. Standby time and talking time are both depending on mobile phone using situations, network situations and environments.
Mobile phone appearance Mobile phone view 2
⑴ Left soft key ⑵ Right soft key ⑶ 4-way navigation key ⑷ Send key ⑸ End (Power) key ⑹ Number keys ⑺ Charger connector ⑻ Headset hole 3
The apartment of the mobile phone and introductions 4 Name Description Left soft key In standby mode, press left soft key to main menu. Right soft key In standby mode, press right soft key to Contacts list. Up key In standby mode, short press up key will show the TATA zone menu. In menus or function options, used to select the upper menu. Down key In standby status, press down key to show Scheduler menu. In menus or function options, used to select the down menu.
Name Description Headset hole Before using headset, pull in the headset to this hole. Notice: Long press means pressing key time more than or equal 2 seconds; short press means pressing key time less than 2 seconds. Icon bar Icon Description Indicating signal strength. Indicating in call status. Indicating without network. You have one or several missed call. Indicating the mobile phone is under data service mode currently, such as brew download, PC data service.
Icon Description Indicating the mobile phone is under roaming service mode. Indicating the keypad is locked. Indicating the phone is locked. You have one or several new text messages. You have one or several new voice mail. You have one or several new garbage messages. Indicating full SMS. You have set the alarm clock. You have set the meeting mode. You have set the outdoor mode. You have set the silence mode. You have set the general mode.
Icon Description Indicating battery power level.
2 Getting Started Install and charge the phone 1. Remove the battery cover 3. Install the battery 8 2. Insert the RUIM card 4.
3 Basic Functions Switching On/Off z z In the power off status, long press the Power Key to switch on the phone. In the power on status, long press the Power Key to switch off the phone. Making phone call Making phone call using the keypad 1. In the standby mode, enter the phone number you want to dial, and press the Send Key to make the call. To delete a character to the left of the cursor, press . To save the number, press and select Save number. 2. To end the call, press the End Key.
2. Select List to view the contacts list, and press Up/Down key to choose a contact, or select Search to search out the contact you want to call, either by name or by number. 3. Press the Send Key to make the phone call. Making phone call using last dialled number 1. In the standby mode, press the Send Key to display the last 10 numbers dialled. 2. Scroll to the number or name you wish to redial, and press the Send Key.
Answering the call Answer or silence an incoming call 1. To answer the call, press the Send Key or select . Press to mute the ringing tone before you answer the call. 2. To reject the call, press the End Key or select . Adjust the earpiece volume Press the navigation key of your phone to adjust the volume of the earpiece, during a call. When adjusting the volume, a bar chart appears in the display indicating the volume level.
¾ ¾ ¾ ¾ ¾ ¾ ¾ Message: To the message menu. DTMF on (off): To enable or disable the DTMF tone of your phone during a call. Hand free on (off): To activate or deactivate the loudspeaker. New call: Initiate a conference call. See “Make a conference call” P9 for information. Mute on (off): To mute or unmute your phone during a call. Phone info: Shows the details version information for the phone. Voice privacy: There are two options for your choice: Standard and Enhanced.
4 Text Entry Text input method Your phone provides following text input methods: z English input method: input English characters; z Numeric input method: input numeric characters; Input method Icon Letter case Intelligent EN Upper case Multi-tap en Lower case En Word case text, only available at the beginning of a word. Abc Word/sentence case text, only available at the beginning of a word/sentence.
Numeric 123 - Change the input method z z Press [*] to switch between upper case, lower case and word/sentence case; Long press [*] to enter symbol list; Press [#] to switch between Intelligent, Multi-tap and Numeric mode. Notice: Press [1] to insert common symbol under the intelligent mode or multi-tap mode.
5 Contacts You can save names and phone numbers (contacts) in the phone memory and in the RUIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. The RUIM card memory can save names with one phone number attached to them. Add new 1. In the standby mode, press
z Save: Save the record in the Contacts list. List 1. In the standby mode, press
Notice: If you input the wrong name or the wrong number, the phone will inform you “No match found”. Groups 1. In the standby mode, press
Copy 1. In the standby mode, press
Delete 1. In the standby mode, press
6 Messages Your phone is capable of creating, sending and receiving text messages. Text message (SMS) Text messaging is a network service. If your wireless service provider supports this feature, you can send and receive text messages to compatible phones that are also subscribed to the service. When composing text messages, check the number of characters allowed in the top right corner of the message. Using special characters takes up more space.
Text message menus In the standby mode, press
Write and send SMS messages 1. In the standby mode, press
Text message options Inbox 1. 2. ¾ ¾ ¾ ¾ In the standby mode, press
¾ Move to archive: Move the message to the archive folder. Draft 1. 2. ¾ ¾ ¾ In the standby mode, press
¾ Delete: Delete the selected message. Templates 1. In the standby mode, press
to access the Main menu > Messages > Templates; 2. Select the template message you want to use. 3. Press to edit, delete and use the template. Delete messages In the standby mode, press to access the Main menu > Messages >Delete messages and one of the following options: ¾ Inbox: Delete messages in the Inbox, including read messages, delivery report and all messages.Message setting In the standby mode, press
to access the Main menu > Messages > Message setting and one of the following options: z Storage location: Allow you to select a storage location for a message. It can be either stored in the phone memory or on the RUIM card. z Priority: Message sending priority levels are classified as: Normal, Urgent and Emergency. z Delivery report: Set the network to inform you when your messages have been Delivered.z SMS on call reject: If you select Enable, when receive an incoming call, press , phone will send a reject message which user edited before. Memory status View the amount of memory currently in use for messages. Voice mail The voice mailbox is a network service and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider. z Listen: Connect to the voicemail server to listen to your messages.
7 Call history Call history stores information about the last 10 missed, 10 received, or 10 dialled calls. It also adds the total duration of all calls. When the number of calls exceeds the maximum, the most last call replaces the oldest. Missed calls 1. In the standby mode, press
to access the Main menu > Call history; 2. Go to Missed calls, Received calls, or Dialled calls, select a call record, press to access the following options: ¾ View: View the time of the record.Received calls The received calls are calls that have been answered or rejected. Dialled calls The dialled calls are previous calls you have dialled from your phone. Delete You can delete any missed calls, received calls, dialed calls, or all calls from phone memory. Call timers You can view the duration of your calls. Last call: Check the length of your last call. z Received calls: Check the total length of all calls you have received. z Dialled calls: Check the total length of all calls you have dialled.
8 Settings The settings menu provides you with various setting options to customize the phone to your preferences and needs. You can also reset the settings to their default status. Display Banner Use this menu to choose whether the display shows a customized banner under the operation logo, when the phone is in the standby mode. In the standby mode, press
to access the Main menu >Settings > Display > Banner; you can edit the banner as per you want it.In the standby mode, press
to access the Main menu >Settings > Display > Contrast. Phone setting Use this menu to change the setting of Auto key lock, Input setting, and Time format. Auto key lock Use this menu to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. In the standby mode, press to access the Main menu >Settings >Phone setting > Auto key lock > Off, 10 sec., 30 sec., 1 min.Call setting Answer call Use this menu to set the phone answer call method. In the standby mode, press
to access the Main menu >Settings >Call setting> Answer call> Press send key or Press any key; Auto answer Set the phone to answer the incoming call automatically when the headset inserted. In the standby mode, press to access the Main menu >Settings >Call setting> Auto answer> After 5 sec. or Off; Voice privacy Use this menu to protect your voice content during a call.Call forward This network service reroutes incoming calls to a phone number that you specify. In the standby mode, press
to access the Main menu >Settings >Call setting> Call forward; 1. Select call forward options: ¾ Immediate: after this function is enabled, all incoming calls will be forwarded to the number designated or voice mail. ¾ When busy: after this function is enabled, when in-call, the incoming call will be forwarded to the number designated or voice mail.even while you are in a call. You can accept, reject, or ignore the incoming call. In the standby mode, press
to access the Main menu >Settings >Call setting> Call waiting> Enable or Disable or Edit feature code; To activate call waiting, select Enable. To deactivate call waiting, select Disable. You can change the feature code by choosing Edit feature code. During a call, press or press the Send Key to answer the waiting call. The first call is put on hold.Press
to access the Main menu >Settings >Call setting>Call Time> Call Time Show or Call Time Hide. Firewall Call Use this menu to block or allow some numbers for incoming calls. Blacklist To set the blacklist, do the following: 1. In the standby mode, press to access the Main menu >Settings > Firewall>Call > Blacklist; 2. Scroll to any empty entry, and press . 3. Enter the number, and press ; or select Search to retrieve a number from your contacts.Whitelist To set the whitelist, do the following: 1. In the standby mode, press
to access the Main menu >Settings > Firewall> Call > Whitelist; 2. Scroll to any empty entry, and press . 3. Enter the number, and press ; or select Search to retrieve a number from your contacts. If you want to change or delete the entry in whitelist, you can use the options and one of the following menus: ¾ View: View the number. ¾ Edit: Edit the number. ¾ Delete: Delete the entry.by other person. To access the menu, you must enter the preset lock code. By default, the preset lock code is 0000. In the standby mode, press
to access the Main menu >Settings > Firewall> Private > Message, Contacts, or Call history> On or Off; SMS Use this menu to block some numbers for incoming messages. In the standby mode, press to access the Main menu >Settings > Firewall> SMS, and use the following menus: ¾ Spam number: 1. Scroll to any empty entry, and press . 2.¾ Prompt: Use this menu to enable or disable the special prompt for incoming garbage messages. ¾ Settings: z Reject Spam number: If activated reject garbage number feature, the mobile phone will compare the short message number with the "Spam number" number one by one, if the number belongs to the garbage list, then the message is regarding as garbage message; if not, it is an normal message.
When the device is locked, you can still call the official emergency number programmed into your phone. In the standby mode, press
to access the Main menu >Settings > Security> Phone lock and one of the following menus: ¾ Lock now: Enable the phone lock right now. ¾ On power up: Phone locked is displayed each time you turn your phone on. ¾ Disable: Disable the phone lock. Theft proof This menu allows your phone to work only with the RUIM card which is in RUIM list.Change security code By default, the preset lock code is 0000. 1. In the standby mode, press
to access the Main menu >Settings > Security > Change security code; 2. Enter your four-digit lock code and press . 3. Enter the new lock code (only 4 characters), and press . 4. Enter the new lock code again for verification, and press . When you change your lock code, make sure to remember it. If necessary, write it down and store it in a safe place away from your phone.Clear memory Use this menu to clear all data (include Call History, Contacts (RUIM), Contacts (Phone) or Clear All) that you have stored. Phone info You can get SW version, HW version, and PRL version.
9 Profiles Profiles define how your phone reacts when you receive a call or message, and other settings for each of the available profiles can be left at their default settings, or customized to suit your needs. The following profiles are available: General, Silent, Meeting and Outdoor.
Power on/off: Enable or disable the alert for power on or off. Low battery beep: You can choose to switch Enable/Disable. z Minute beep: Set the phone to beep ten seconds before every minute during a call to keep you informed of the length of your call. z Call connect beep: Set the phone to beep when an outgoing call connects to the system. z Call end beep: Set the phone to beep when a call end to the system. z Service change: Enable or disable the alert for service change.
10 Fun and Utilities Your phone contains features to help organize your life, including Alarm, Scheduler, Calculator, and Stopwatch. Alarm Use this menu to set alarms. The alert type for a normal alarm corresponds to the call alert type settings. Setting an alarm 1. In the standby mode, press
to access the Main menu > Fun and Utilities > Alarm; 2. Select an alarm, and each alarm options: z Time: Enter the time for alarm to ring. z Period: Select an alert period for the alarm.1. In the standby mode, press
to access the Main menu > Fun and Utilities > Scheduler; 2. View the current calendar. Press left soft key to enter the options, press options to access functions. The functions include View, Add, Delete, Delete expired and Delete All. ¾ View: To examine details of current Item reminders. ¾ Add: To add new Item reminders. ¾ Delete: Delete the current Item reminders. ¾ Delete expired: To delete all the expired Item reminders in record.Stopwatch 1. In the standby mode, press
to access the Main menu > Fun and Utilities > Stopwatch; 2. Press to start the stopwatch. 3. Press to pause the stopwatch. 4. Press to continue the stopwatch. 5. Press to reset the stopwatch.11 Games Games Your phone have 2 games available. LinkLong The snake will get longer after having eaten a food. Making your snake eat more food and keep away from its body. You may control the moving directions of the snake by pressing navigation keys. Pressing the left soft key will play or pause your game, and pressing right soft key will pause it and exit to game main menu. z Resume: Go on with your paused game. z Start: Start a new game. z Sound: Enable or disable the game sound effect.
will gain the score. If the blocks are piled up to the top of the screen, new blocks will have no space to drop and then game over. Pressing left or right key will move dropping blocks to left or right, pressing up key will move the upmost block of the dropping blocks to the downmost block, and pressing down key will make the dropping blocks accelerate down. Pressing the left soft key will play or pause your game, and pressing right soft key will pause it and exit to game main menu.
12 TATA zone Under the TATA Zone menu, there are three function options, including: “MobileShop”, “Settings” and “Help”. The icons of internet applications will display here, if some internet applications have been downloaded. z MobileShop: Consist of Catalog, Search, About Download. z Settings: You could access following options: Order Apps, Move Apps, Manage Apps, Main Menu View, Screen Savers and View Log. z Help: You can inquire related help information in “Help” menu.
13 My data My data menu allows you to access ring stored in the phone’s memory. Ring You could play or use the ringers that in download folder. 14 SMS services This menu option allows you to access a range of SMS based services that help you do more. Simply select the desired service from the service menu. Choose from Ringtones, Logos, Fun, Cricket, Astrology, News, Stocks, Lifestyle, Information and Call Divert.
15 Care And Maintain If your mobile phone had abnormal conditions, please check it with the following table. If the problem still remains, please ask mobile phone sales for help. Common problems Check item Can not charge Please checks if the charger is properly connect to the phone and the power source jack. Can not power on Please check if the battery level is too low; Please check if the batter is properly loaded; Please press Power Key enough time.
Common problems Check item Weak talk quality Please check if the phone signal is strong enough; If you are in the building, please move the phone or move near the window. The contact can not get your voice when making phone call Please check if your mike has blocked by fittings or other blocks. Receiver sound is too low Please check if your receiver volume has been adjusted to the largest.
16 Safe Information Electronic Device Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your Mobile Phone. Consult the manufacturer to discuss alternatives. Hospital z Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). z Do not use your phone at places for medical treatment where it is prohibited to use mobile phones.
are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Care and Maintenance z Keep your phone and all its parts and accessories out of the reach of small children and pets. They may accidentally damage these things or choke on small parts.
z Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and water solution. z Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation. z Do not put the phone in or on heating devices, such as a microwave oven, stove, or radiator. The phone may explode when overheated. z When the phone or battery gets wet, the label indicating water damage inside the phone changes colour.
z Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery. z If left unused, a fully charged battery will discharge itself over time. z Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.
1 RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types HC-C2000 (FCC ID: SG70707HC-C2000) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.192 W/kg and when properly worn on the body is 0.263 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.