HC-C2100 User Guide The information in this User Guide is based on the production standard model of the HC-C2100 CDMA mobile phone. As Haier Telecom Company follows a policy of continuous development, the company reserves the right to make adjustments, changes or revisions to all information given herein, without prior notice.
HC-C2100 User Guide Contents Welcome ........................................................................................................................... 1 Contents............................................................................................................................ 2 1. Essential Information..................................................................................................... 4 1.1 Safety guidelines................................................................
HC-C2100 User Guide 7. Tools............................................................................................................................ 24 7.1 Alarm clock......................................................................................................... 24 7.2 Scheduler........................................................................................................... 25 7.3 Calculator.............................................................................................
HC-C2100 User Guide 1. Essential Information Given here is essential information that will help you in the optimum operation of your mobile phone. By adhering to these guidelines you will be protecting yourself from unnecessary personal or financial damages or infringements of the law. Kindly read the User Guide in its entirety for complete information. 1.1 Safety guidelines Traffic regulations Traffic and road safety regulations prohibit your usage of the phone while driving.
HC-C2100 User Guide Switch off your phone in the hospital Switch off your phone in healthcare facilities when any regulations posted in these areas instruct you to do so. Hospitals or healthcare facilities may be using equipment that could be sensitive to external RF energy.
HC-C2100 User Guide Emergency calls • Emergency call procedure: Type in the local emergency number and press the send key. Emergency call numbers in Indonesia are: 110/112/113/115/118. Electronic devices Most modern electronic equipments are shielded from Radio Frequency (RF) energy emissions. However, certain electronic equipment may not be shielded against the RF signals emitted by your phone and care must be taken in usage of your phone next to sensitive electronic equipment. 1.
HC-C2100 User Guide 2. Handset guide The illustration below displays the main components of your Haier HC-C2100 CDMA phone. The list below provides a short description of the keypad functions on your Haier HC-C2100 CDMA phone.
HC-C2100 User Guide ·Quick into UTK, Scheduler, Settings, Messages ·Control the cursor directions ·Enter the digits 0 to 9 ·Press and hold to lock the phone, and press 123 to unlock ·Enter the character * ·Activate symbol mode ·Press and hold to switch between General and Vibrate only mode ·Enter the character # ·Press to switch between different input method 2.1 Idle mode screen 2.1.
HC-C2100 User Guide The missed calls and their numbers will be shown on screen. 3. New message When the new message is received: 1) Your phone makes alert tones. 2) Your phone will alert you new message arrival and their numbers. 2.2 Battery 2.2.1 Installing and removing To install the battery 1. Remove the battery cover by sliding the cover downwards. 2. Place the battery in the battery compartment and close the cover. To remove the battery 1. Ensure your phone is turned off. 2. Remove the battery cover.
HC-C2100 User Guide use it. z Do not pull out the plug of the charger during charging to avoid electrical damage to the phone and the charger. 2.3 RUIM card Purchase a RUIM card from network operator. Your phone number and registration information are stored in your RUIM card. Your RUIM card can be used in any CDMA phone. Your number and information will not change. To insert the RUIM card 1. Make sure to switch off your phone before taking out the battery. 2.
HC-C2100 User Guide 2.4 Making and receiving a call 2.4.1 To make a call You can use the function only after the network-prompting icon is shown on screen. 1. Dialling Select a desired entry from the names list or directly type in the phone number in idle key to dial. mode, press 2. Making an international call z Press and hold key until "+" appears on screen. z Input the country code, area code (without prefix zero) and phone number. z Press 3. key to dial.
HC-C2100 User Guide settings->SMS on call reject is set to ‘On’, here default message will be sent to caller’s handset automatically. 2.4.3 During a phone call During a phone call, press up/down navigation key to adjust the microphone volume. Press Mute on right soft key to temporarily turn the microphone off. Reselect this key to resume your conversation. Press Options on left soft key to view the following options: 1. Messages Allow you to enter the Messages menu. 2.
HC-C2100 User Guide Note: If you have entered PIN code incorrectly for max retry limits, RUIM card will be automatically locked. The phone will prompt for PUK (PIN unlocking key) here. You can get PUK from your mobile phone service provider. 3. Input method Your phone provides T9 input method. When using your mobile phone there will be many times that you will need to input text e.g. sending messages, entering names into the phonebook, etc. Under the input mode, press key to switch the input method. 3.
HC-C2100 User Guide 3.3 To input using T9 text input (T9En \T9en \T9EN \T9In \T9in \T9IN) By using T9 text input method, you can create a word easily and quickly. 1) The ‘en’ option allows you to type predictive text in English with all letters in lowercase. 2) The ‘En’ option allows you to type predictive text in English with the first letter in uppercase. 3) The ‘EN’ option allows you to type predictive text in English with all letters in uppercase.
HC-C2100 User Guide memory depends on the network service providers. 4.1 List To access the entries saved in the phone or RUIM card memory. Phone names Phone names like an address book, in which you can view and edit the phone number, email, address, URL, notes. 1. Options By selecting ‘Options’, you can access the following sub-menus: 1) Add new You can add new Number, Email, Address, URL and Notes information to this record.
HC-C2100 User Guide RUIM names On RUIM card, you can view and edit entries as a name with a single number. 1. Options By selecting ‘Options’, you can access the following sub-menus: 1) Edit name Allow you to change the selected name and to save. 2) Erase contact Allow you to erase the selected record. 2. Phone number By selecting phone number, you can access the following options: 1) Edit Allow you to change the selected phone number and to save.
HC-C2100 User Guide 4.4 Multicopy With the multicopy function, you can copy all of the records from the RUIM card to the phone memory and vice versa. 4.5 Groups There are 6 groups, including ‘No group’, ‘Family’, ‘Friends’, ‘Business’, ‘VIP’ and ‘RUIM’. You can allocate names only stored in phone memory to specific group. By default the phone names are allocated to the ‘No group’ and the RUIM names are allocated to ‘RUIM’. 4.5.1 View Allow you to view the member’s information of the selected group. 4.5.
HC-C2100 User Guide 3. To dial a speed dial number To access contact numbers that have been assigned numbers from 1 to 9, press and hold down the assigned number, and the contact number will automatically be dialled. For example, to speed dial the 8th entry, press and hold down 8 key. Default speed dial number is: 1=Voice mail (*88) 4.8 Memory status This function helps you to check the number of entries stored in the names lists.
HC-C2100 User Guide 5.1.4 Insert number The Insert number option allows you to insert a contact number directly while composing the message. 5.1.5 Save This option allows you to save the contents of the edited message to the Draft. 5.1.6 Message settings You can set single message setting, including ‘Priority’, ‘Validity’, ‘Deferred delivery’, and ‘Delivery reports’. 5.2 Inbox Inbox contains the received messages. From the message view, you can press key to access the following options: 5.2.
HC-C2100 User Guide 5.3 Outbox Outbox contains sent and unsent messages. You can retrieve these messages and forward them to other contacts or erase the message if it is no longer required. Erasing messages from the Outbox can free up additional memory on your phone. You can access the following options: Forward, Save number, Erase. For operation please refer to Inbox. 5.4 Draft Draft contains saved messages. You can access the following options: Send, Erase. For operation please refer to Inbox. 5.
HC-C2100 User Guide memory. 5.8 Message settings You can customize the way you would like your messages to appear or be received. By pressing key, you can access the following options: 5.8.1 Auto save Allow you to select ‘On’ or ‘Off’ option. If you select ‘On’ option, your phone will save the sent messages in the Outbox (subject to memory available). 5.8.2 Auto delete Allow you to select ‘On’ or ‘Off’ option.
HC-C2100 User Guide 5.8.7 Validity You can set the Validity period for your messages, that is, how long they should be available to the receiver. Allow you to select 'Default' '30 Minutes' '1 Hour' '2 Hours' '12 Hours' '1 Day' '2 Days' '3 Days' options. 5.8.8 SMS on call reject If this feature can be set to ‘On’, when you ignore the incoming call, the default message will be automatically sent to the caller’s phone number.
HC-C2100 User Guide Detailed call records as following: 1. Call Allow you to call the available number. 2. Time Allow you to view the time when the call is enabled. 3. View number Allow you to view the available number. 4. Send SMS message You can send a message to the available number. 5. Save new Allow you to save the available number as a new phone contact. 6. Save to name Allow you to save the available number to an existing phone contact. 7.
HC-C2100 User Guide 6.4.5 Reset timer Selecting this option resets the history timers to zero. 6.5 Erase lists You can erase all your recent call histories. 7. Tools Tools menu offers you the functions of the Alarm clock, Scheduler, Calculator. 7.1 Alarm clock You can set an alarm by using the phone’s built-in alarm clock function. The alarm clock is based on the system network clock. 7.1.1 Alarm1/2/3 1. Enable/Disable This function allows you to switch an alarm on or off. 2.
HC-C2100 User Guide 7.2 Scheduler You can use the scheduler function to set reminder/alerts for various events, meetings and more. The time entry is available in a 12-hour format only. 7.2.1 Add new 1. Select Tools->Scheduler->Add new->Current Time->Set 2. Set the wanted date and time, then press Select key to save. 3. Add the description of the schedule you wish to assign, and then press Ok key. Note: If the alarm time can be set to past time, the phone pops up message ‘Past date and time.
HC-C2100 User Guide 7.4 Tip calculator This function allows you to quickly calculator the tip along with bill amount as well as an option to split the total bill. 1. Select Tools -> Tip calculator 2. Select the ‘Next’ 3. Select rate to select a percentage of tip. 4. Press key to get the total result plus the tip. 5. To split the total bill plus tip, select the ‘Options’ soft key then select ‘Split’ to split the amount. 7.5 Stop watch 1. Select ‘Start’ to start the time count in second. 2.
HC-C2100 User Guide The phone provides six options: Ringer/Vibration/Vibr. then ring/Ring and vibrate/Silence /Ascending tone. 8.1.3 Volume This function allows you to adjust the volume output of the Ringer, Key Beep, Earpiece, Message or Alarm. 8.1.4 Alerts You can change the status of alerts detailed below.
HC-C2100 User Guide 8.2.2 Language This function allows you to set the displayed languages. 8.2.3 Backlight You can specify the duration and as well as adjust the intensity. 1) Duration The phone provides 4 timers (Always off, 10 Sec, 30 Sec and Always on) to allow you to select. 2) Intensity You can adjust the intensity of the backlight from 5 levels. 8.2.4 Contrast You can adjust LCD contrast from 0 ~ 9 level. 8.2.5 Clock time You can set the clock time to show or hide. 8.
HC-C2100 User Guide 8.3.2 Change code This option is used to change the lock code. After selecting this option, you will be asked to enter new lock code to replace the old code. The new lock code must be entered again as confirmation. 8.3.3 Emergency numbers Phone provides 5 default emergency numbers and allows you to set them manually. 8.3.4 Reset to default 1) Clear all names Phone allows you to delete all name records stored in phone memory.
HC-C2100 User Guide access to your RUIM card will be restricted each time the phone is powered on. 1) PIN lock If you set PIN to ‘On’, the phone will ask for PIN each time it is switched on. You can get PIN code from your mobile phone service provider. 2) PIN change This option is used to change PIN code. After enter the old code, the phone will ask for enter a new code to replace the old one. The new code must be entered again as confirmation.
HC-C2100 User Guide 1. Immediate This function will unconditionally forward all incoming calls to others. 2. When busy This setting will forward incoming calls when you are on a call. 3. No reply This function will forward incoming calls if you don’t answer the call or your phone is out of network service or switched off. 4. To voice mail This feature allows you to forward incoming calls to voice mail number. 8.4.
HC-C2100 User Guide 9. Games 9.1 Link long If you have selected the Link long game, you can choose to start the game. Use up/down/left/right navigation key to control the cursor. Press game pause and press again to proceed. Press once to make the to exit the game and return to the menu. Game is over when the snake’s head come up against its body. The player wins if the game shows “Congratulation”. 9.2 Magic block If you have selected the Magic block game, you can choose to start the game.
HC-C2100 User Guide 1 RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types HC-C2100 (FCC ID: SG70704HC-C2100) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.257 W/kg and when properly worn on the body is 0.776 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
