Important Safety Precautions 2、Personal Radio equipments including mobile phone may cause interfere to some medical equipments, such as audiphone and pacemaker. Please consult your medical equipment supplier or doctor before using the mobile phone. Please pay much attention to the limitation on usage of raido equipments at the site near oil store, chemical plants where there is explosive gas or explosive product lines.
disable your mobile phone and SIM card at once when your mobile phone is lost or stealed. It may free you from further economic loss.When you contact operator or operator’s distributors, they need your mobile phone’s IMEI number.The number is printed on the label on backside of the phone set (You shall revome the battery to find this label).Please record this number in a proper place for your further use.
Don’t let children play phone, charger or battery. 3、Mobile Phone Your mobile phone will cause change in electromagnetic field, so please place it near electromagnetic media such as softdisks. Using mobile phone near TV, telephone, radio or PC may cause interfere and thus effect the performance of mobile phone. Never place your mobile phone or other accessories near liquid or in humid environment. Please do not put phone at super high and knockdown temperature environment.
stored in these media may be damaged by mobile phone. Never try to disassemble mobile phone or other accessories. Clean mobile phone with only wet or anti-static cloth. Never clean mobile phone with dry or static cloth. Never use any chemical material or detergent with abrading element, or they may damage the shell of mobile phone. Microphone may heat in normal operation, and mobile phone may heat during recharging.
only be repaired by professional engineers. Unmatched battery may cause explosion. Please handle used batteries following manufacture’s instruction. Any battery or charger not authorized by the manufacture of the mobile phone may cause danger. The damage resulted from these reasons is not covered by warranty. Microphone may heat in normal operation, and mobile phone may heat during recharging. Notice: Don’t touch any leakage from broken batteries.
Airbag, brake, velocity control system and oil injection system is free from any radio effect. Any problem about these fields please contact your motor distributors.Airbag will bring strong force when it is released, so please never place or install wireless equipments over airbag or around the expending area of airbag, otherwise these equipments may cause severe damage when it is released. When oiling please shut off your mobile phone and all radio equipments are not permitted to use at the same time.
Getting Start Please read this manual carefully before using your mobile phone. This chapter will teach you how to install, recharge and maintain your mobile phone batteries. It will also tell you some information about GSM network and instruct you to insert and unlock SIM card. The info about it will also be detailed in this chapter. 2.1 Battery The phone is powered by a rechargeable Li-ion battery. It was not fully charge but can still support the power on of your mobile phone.
The metal joint of battery should aim at metal joint of the phone, slide it into slot top at the angle of 15°and slide the battery to the end forward. Then press the bottom of battery, you can hear the sound of “kaka” and the battery is locked. Cover the battery cover to the phone. 2.1.2 Remove battery Turn off phone set, remove other external power source. Press at the top of the battery cover and pull it toward the end of the phone, and demount it.
2.1.3 Charge the battery 1、Make sure that the battery is well connected. 2、After install the battery and battery cover, plug the connector of the adapter into the jack at the left side of the phone. 3、Plug the adapter into a standard AC wall outlet. 4、Now appears a “In charging” icon to indicate that the battery is being charged ( or charge instruction bars keep changing if the phone is turned on). When the icon is not in movement (and prompt recharging is over), it indicate that recharging is completed.
C and using the charger supplied by the manufacture. Unauthorized charger may cause danger and will breach the warranty terms of the mobile phone.
2.1.4 Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, you will hear a warning tone and a message will be repeated at regular intervals on the display: If the battery level gets too low, the phone turns off automatically. 2.1.5 Usage of battery The standby duration time of the mobile phone provided by the manufacture is measured in ideal environment. In real application it may change in different network status, environments and usage ways. 2.
phone set (the later phone set can read data from the SIM card automatically).
card, you shall try to avoid touch any metal area and keep the SIM card far away from electricity and magnetic field. Once SIM card is damaged, you can never enter into GSM network. Warnings: You shall turn off your mobile phone before unload SIM card. Never insert or remove SIM card when external power is connected to the phone set, other wise SIM card may be damaged. 2.2.1 Insert SIM card You must remove your SIM card from the card-type package before load it into phone set.
off phone set, remove battery and then unload the SIM card. 2.2.2 Access Code There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorized use. 2.2.3 Phone Password The Phone Lock feature uses the phone password to protect your phone against unauthorised use. The phone password is supplied with the phone and is preset to “0000” at the factory.
accidentally. PIN The Personal Identification Number or PIN (4 to 8 digits) protects your SIM card against unauthorized use. It is usually supplied with the SIM card. If you enter an incorrect PIN three times in succession, the code is disabled and cannot be used until you re-enable it by entering the PUK (see below). PUK The 8-digit PUK (PIN Unblocking Key) is required to change a disabled PIN. The PUK may be supplied with the SIM card. If not, or you have lost it, contact your service provider.
succession, the SIM card becomes invalid. Contact your service provider for a new card. PIN2 The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to access specific functions, such as setting the maximum cost of a call. These functions are available if supported by your SIM card. If you enter an incorrect PIN2 three times in succession, the code is disabled and you cannot access the functions until you re-enable it by entering the PUK2.
enter the same code again and press the left soft key. If you enter an incorrect PUK2 ten times in succession, you will not be able to access the functions requiring the PIN2. Contact your service provider for a new card. 2.2.4 Barring Password The 4-digit barring password is required when you use the Call Barring function. You obtain the password from your service provider when you subscribe to this function. See page 109 for further details. 2.
from the slot. 2.4 USB Cable Through USB Cable, the phone can be connector with computer to transfer files. To start a USB connection： 1、Plug USB connector to the computer. 2、Plug another USB connector into the jack at the left side of the phone. To end a USB connection： Exit the USB connection on your computer. Remove the USB cable from your phone. Notes: 1、When connected with computer, “Mass Storage” and “COM Port” will be displayed for you to select.
3． Getting to know the phone 3.
3.2 Keys and Navigation Keys Description Power Key • Switch the phone on/off when pressed and held • Ends a call • In the menu mode, cancels your input and returns to the idle mode. on/off Dial Key • Makes or answer a call • When held down in the idle mode, reviews Call Records. Navigation Key • In menu mode and when entering text, scroll through the menu and text.
access Audio Player menu; Right Key allow you to access Message menu; OK Key • In idle mode, launches the WAP Browser directly. Soft Key( Left/Right) • Perform the functions indicated by the text above them( on the bottom line of the display) • In idle mode, Left Soft Key enters the main menu; Right Soft Key enters Phone Book menu.
Alphanumeric Keys •In idle mode, enter numbers, letters and some special characters. •In menu mode, press and hold any of these keys to reach a contact beginning with a specific letter. • Press and hold any of these key to enter the specific function you set. * Key • In idle mode, long press to lock the phone; • In idle mode, press the key three times quickly to dial international call # Key •In idle mode, press and hold to set the phone to silent.
3.3 Icon Icon Description Shows the level of your battery. The more bars you see, the more power you have left. Shows the received signal strength. The greater the number of bars, the stronger the signal. GPRS can be used. Appears when a call is missed Appears when a new text message has been received. Appears when Alphanumeric Keys are locked.
Appears when Ring Type(in Alert Type) is set. Appears when Vibration Only Type (in Alert Type) is set. Appears when Vibration then ring Type (in Alert Type) is set. Appears when Vibration and Ring Type (in Alert Type) is set. Appears when you set an alarm to ring at a specified time. 3．4 Switching the Phone On or Off 3.4.
switches on. 2、If the phone asks you to enter the phone password, enter the password and press the left soft key. The phone password is preset to “0000” at the factory. 3、If the phone asks for a PIN, enter the PIN and press the Left soft key. （For further details, see “Phone password”）. 3.4.2 Switching the Phone Off When you wish to switch the phone off, please press Power On/Off key, when power-off animation displays on the screen, mobile phone is off.
receive a call. 2、When the idle screen displays, enter the area code and phone number, and press the Dial key. 3.5.2 Making an International Call 1、Press * Key thre etimes quickly. The * + character appears; 2、Enter the country code, area code and phone number and press the Dial Key. Notes：Correcting the Number Press the Right soft Key to clear the last digit displayed or long press to clear the whole display. 3.5.3 Ending a Call When you want to finish your call, briefly press the Power on/off key. 3.5.
the associated number. 3.5.5 Making an Emergence Call In any country if you want to dial an emergency call you can dial 112 (or other emergency service number). Ensure that you have turn on the mobile phone and be in a service scope of network, and then you can input the emergency number and press Snd key. After setting up the call you can tell the operator your location.In emergent situation, please don’t hung up your phone and try to stay your site and keep telephone communication.
3.5.6 Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the side keys on the right side of the phone. Press the Up Side key to increase and the Down Side key to decrease the volume. 3.5.7 Answering Call When call comes in, the phone alerts you by ringing, vibration, vibration and ring, vibration then ring or only light according to the setting of mobile phone. If you want to receive the call, press Dial key.
been saved in telephone memory book, the name corresponding to this number will display on the screen. 3.5.8 Viewing Missed Calls The number of missed calls displays on the idle screen immediately after a call is missed. You can press “ View” to read the information. 3.5.9 Rapid Dial-up This mobile phone provides 9 shortcut key. You can self-define the telephone numbers corresponding to these keys (see “telephone directory” for detailed description).
number, this key will be available. 3.5.10 Hold Call If you have applied for the value added business of hold call service, press left soft key in the process of session for the following menu: Options Suspend Description Suspend current session temporarily, but maintain connection of the communication line. End End current session. New Session Enter dial-up interface, dial another telephone number Phone Book Enter Phone Book .
Sound Recording: Carry out sound recording for current session content. Mute/resume Turn off/on headphone. Dual Sound Multi-frequency Set whether send out DTMF signal. Notes: Some menu option only appear under specific situation, or need support of local network, such as “new session” Emergency call. In any country if you want to dial an emergency call you can dial 112 (or other emergency service number).
Dut to the character of GSM network, urgent calling is not guaranteed to succeed. 3.6 Entering Text You can select English and Spanish as display language. The phone allows you to enter characters for messages and names in Chinese and English. When you are in a field that allows characters to be entered, you will notice the text input mode indicator on the display. You can change the Text Input Mode by press# Key and Press * Key to insert symbols in a text message.
-Once for the first character -Twice for the second character and so on. 3.6.2 Using the Number Mode The Number mode enables you to enter numbers in a text message (a telephone number for example). Press the keys corresponding to the required digits before manually switching back to the appropriate text input mode. 3.6.3 Using the Smart English Mode This phone provides Capital and Small English mode for you to enter text. This mode allows you to enter English words with only one key press per letter.
allows you to enter Spanish words with only one key press per letter. Each key on a keypad has more than one letter - a single press on the 5 key could be J, K, or L. The Quick English mode automatically compares your key presses to an internal linguistic database to determine the correct word. 4.0 Menu Functions 4.1 Call History This mobile phone can record telephone number of missed call, received call and dialed call, can record time and charge for all the calls.
The number and name, if available, display together with the date and time at which the call was received. By pressing the option key, you can: ~ Edit the number if available and dial it or save it in the phonebook ~ Delete the call from the list 4.1.2 Dialed Call This option lets you view the last 20 numbers you dialled. The number and name, if available, display together with the date and time at which the call was made.
call was received. By pressing the Options soft key, you can: ~ Edit the number if available and dial it or save it in the phonebook ~ Delete the call from the list 4.1.4 Delete Call Record You can delete all of the call records in each call type; missed, received, dialled calls. When the desired call record highlights, press the Left Soft key. When a confirming message displays, press the Yes soft key to delete. If not, press the No soft key. 4.1.
4.1.6 Call Cost It needs to be supported by network service provider. Options Description Last Cost Last call charge can be viewed through this function. call Total Cost total cost of all calls made since the cost counter was last reset. If the total cost exceeds the maximum cost set in the Max Cost option, you can no longer make any calls until you reset the counter. Reset Cost option used to reset the cost counter Max Cost option used to enter the maximum cost that you authorise for your calls.
Price Unit Per This function needs support of network. For details, please consult network operator. 4.1.7 SMS Counter View the record of number of message sent and received, and reset the Counter 4.1.8 GPRS Counter View the amount of Bit you sent and received, and reset the Counter 4.2 Setting 4.2.1 Phone Setup You can set up options such as language, waiting wallpaper, time for mobile phone in this menu.
down navigation keys. Notice: This option need to be used together with auto time updating, with the support of network, can it auto update time and date. 2 、 Set Time/Date: Set up current time and date. 3、Set Format: Set up time and date display format. Notice: if battery is taken out form mobile phone or voltage of battery has been used up for a long time, it may need to reset time when you re-place battery or re-turn on your mobile phone after charging the battery.
Spanish are available. Preferred input Methods Set up default input method for mobile phone according to your operation practice. Display characteristics set up wallpaper, screen Saver, power on/off Display, , whether display date and time, own number of this mobile phone and operator name. Greeting text Set the greetings to display on main screen when power on. Speed Dial Set up whether turn on speed dial function and edit corresponding rapid dial-up numbers.
through power interface.。 saving Auto update of Date and time If you want to set up mobile phone to update time and date according to current time zone, please select “startup”. Auto time updating will not influence your time setting for alarm clock, calendar or alarm clock memo. They are subjected to the time of creation. But auto time updating will make some alarm clock setup overdue. Flight Mode Supply normal mode, flight mode, inquiry when startup. Flight mode applies on board.
lighter or darker. Auto Keypad Lock Setup automatic keypad lock to avoid dialing a number by accident. You can choose between the following options:None, five/thirty/sixty seconds and five minutes. In idle mode, the keypad is locked after you last press a key according to your set. 4.2.2 Call Setup Options Description IP Number Add or edit IP dial number. Auto Redial This function can set “Power On or Power Off” of auto re-dial.
more times to try to get through some telephone number. Call waiting Set up functions such as turning on or off call waiting. When hold call and multi-party call, this function must be activated first. The realization needs support of network. Call Divert It is a network function. After you apply this function to network operator, the following functions can be used. This function can transfer the calls that meet the condition to another telephone number you designate.
specified time limit. Divert if busy: divert the calls, if you are already on the phone; Divert all Data calls: Need network support Cancel All Divert : Cancel all transfer functions This function needs supported by network. Caller ID to be 1、Set By Network: Send number of this mobile phone according to system presetting method during session. 2、Hide ID：Do not send number of this mobile phone to system during session.
Call Barring The call barring network service allows you to restrict your calls. Call barring can be set up in the following ways: 1、Outgoing Calls: calls cannot be made. 2、ncoming Calls: calls cannot be made 3、Cancel All: all calling barring settings are 4、Change Barring: you can set and change the call barring password obtained from your service provider using this option. You must enter the current password before you can specify a new one. Line Switching You can choose between Line 1 and Line 2.
Call Time Reminder Set up one sound or periodic prompt sound for each integer minute during the call, so that you know call continuous time. Call Time Display Whether display your call time during the call Closed User Group This function needs support of network. For details, please consult local network operator. Black List This network service allows incoming and outgoing calls to be restricted to a selected user group. 4.2.
Selection selects the networks available Preferred Network Select the network in priority GPRS Connection Connect as needed, permanent connection 6.5 Security Setup Iterms Description SIM Lock Turn on or off SIM lock (PIN code) When this feature is enabled, you must enter PIN code each time the phone is switched on. Phone Lock When the Phone Lock feature is enabled, the phone is locked and you must enter the 4-8 digit phone password each time the phone is switched on.
Fixed Dial This function may need the support of SIM card and network operator. You need to input PIN2 code, if you want to activate fixed dialing number. When Fixed Dial is enabled, you can only dial fixed dialing numbers in the list. Barred Dial Set to restraint power on or off function of all or part of telephone function. (need support of SIM card) Change Password The Change Password feature allows you to change your current phone password to a new one, including PIN1, PIN2 and Phone Lock password.
4.2.5 Sound Effect Equalizer：normal，bass，dance，classical， treble，party，pop，rock 4.3 User Profile.
Your phone provides multiple scene mode for you to choose according to different events and environment. General, meeting, outdoor, indoor and headset modes are available. Each scene mode can edit the following contents: Options Description Tone Setup Set up music for incoming call, alarm clock, power on, power off, message tone, keypad tone. Volume Set up ring tone and key tone respectively. Alert type Allows you to specify how you are to be informed of any incoming calls.
ascending options are available. Extra Tone Allows you to select turning warning, error, camp on and connect tone on or off. Answer Mode You can select any key answer. when this option is checked, you can answer an incoming call by pressing any key, except the Power on/off key and the side key) To reject the call, press the Power on/off key or side key. Notes： When earphone is plugged in, mobile phone will auto switch to headset mode. After earphone is plugged out, it will restore to general mode.
Mobile phone has 800K space capacity and can manage pictures, MP3 and data files through this module. Mobile Phone：mobile phone storage body Options Open Create Folder Format Description Open files in memory card. Establish a new data folder under root directory to better store files by classification. Format all data in memory card. 4.5. Messages 4.5.1 SMS Short message function is a network service. You may need to apply to network operator first, then you can send and receive short message.
sending short message. Short message is first sent to short message center of the network, then the network will send to object users (GSM user). If user has not turned on the mobile phone or can not receive short message (storage is full), network will temporarily save this message and storage life is determined by sending user setup and service operator.
When you send message through short message network service, “already sent” may display on the mobile phone. This represents that mobile phone has already sent message to set information center mail box in mobile phone. But it does not represent that designated person has already received the message. For more details about information service, please consult your network supplier. Options Description Wright Message You can create short message in this menu.
animation, ring, my ring, preset melody 4、Format Text: set the text size and style of text, alignment or paragraph 5、Input Method：Capital letter, small letter, intelligent English capital letter, intelligent English small letter, figure input, complicated Chinese stroke input, Pinyin input, intelligent Pinyin input, Pinyin input, intelligent Pinyin, stroke input (refer to stroke input list), punctuation. Inbox You can view the short messages received in the inbox.
3、 Edit: Enter short message editing interface. 4 、 Forward: Forward this message to others. 5、IP Dial：dial short message number and number information in short message received. 6、Copy to SIM：save the message by coping it to SIM 7 、 Move to SIM: save the message by moving it to SIM 8、Delete All: Delete all messages in the inbox.
destination. The short message saved in outbox can be edited, sent, deleted, all deleted, received number. Drafts Save editing SMS. Other operations same as [Inbox]. Template Edit or delete common phrases. Short Message Setup You can set up some parameters of short message in this menu. 1、Profile setting：In order to send message, local short message center number must be input first. Notice: short message number is provided by network supplier.
short message center. 3 、 Preferred Storage ： Set information location (SIM card or mobile phone) when storing. 4、Preferred bearer：Divided into GPRS preference, GSM preference, use GPRS only, use GSM only.Default state of mobile phone is GSM preference. 4.5.2 MMS MMS can contain characters, voice segment and pictures. This mobile phone supports maximum 100 K MMS. If size of MMS exceeds limit, mobile phone can not receive this MMS.
Notes: Only when network operator or service supplier support, you can use this function. Only when device is provided with compatible MMS or email functions can receive and display MMS. Options Description Write Message Recipient Add telephone numbers —— input telephone number of object to be sent. Add E-mail —— input E-mail address of object to be sent. Copy Add telephone number —— input telephone number of object to be sent. Add E-mail —— input E-mail of object to be sent.
Add E-mail —— input E-mail of object to be sent. Subject：Subject of MMS can be edited by your own. Editing Content After MMS characters are edited, press confirm key to enter option: Complete Input Method Edit Characters Add Picture：Insert Picture Add Sound：Insert Sound Add Attachment ： Insert Attachment Remove Character Insert New Page Preview multimedia information Time Interval Inbox You can view MMS received in your inbox. You can also carry out the following operations.
Review MMS details. Reply MMS Reply to all Forward MMS Delete current MMS Delete all MMS Save or use the number of MMS or inside MMS查看并处理已收 到的彩信。 Outbox View MMS that has not been sent out. Other operations same as [Inbox]. Drafts Save editing MMS. Other operations same as [Inbox]. Template Your mobile phone has 5 built-in preset MMS. Can enter to view detailed information, create new message operation from sample. Message Setting You can set up some parameters for MMS in this menu.
1）Createion mode: two modes, ‘not restricted’ and ‘restricted’ 2）Image Resizing: set the size of image 3）Auto Signature：After signed content is edited, turn on/off name of MMS sender. 2、Send： 1）Validity period – set the time for storage and sending in short message service center. It can be 1 hour, 12 hours, 1 day, 1 week and maximum value. 2 ） Delivery Report——Turn on/off sending return report prompt. 3）Read Report——Turn on/off read return report prompt.
MMS that the other party receive. Default: 5; maximum setup: 60 6）Delivery Time——Real time, within one hour, within 12 hours, within 24 hours. 3、Retrieve 1 ） Home Network——Delay, instant, limit 2 ） Roaming——Same as main network, delay, limit 3 ） Read Report——Send, not send, inquiry 4）Delivery Report——Confirm, cancel. 4、Filter： 1）Anonymous——Allow, reject 2 ） Max size——Maximum capacity is 100K.
4.5.3 Email You can use your phone to send and receive emails message. You can use the same email setting in your phone as in your computer email program.( This function needs the support of network and it’s charged) Options Send & receive Description send and receive emails in the email box. Write email edit email Inbox contains received emails Unsent contains unsent email drafts Sent contains sent emails Drafts Save editing SMS.
Delete All Folder delete selected emails or empty inbox, outbox, outbox copy, and draft Email Profile 1、Profile setting: set up transmit basic parameters, including Profile name, Data account, protocol, Check Interval, and Download Size 2、Outgoing server setup: set up outgoing server, including server address, outgoing port, Display name, E-mail Address,username, password etc. 3、Incoming server setup: set up receiving server, including server address, incoming port, username, password etc.
first apply for this service. For more detailed information and voice mail number, please consult your service supplier. 1、Connect to voice: Dial voice mail number stored in your voice mail number function list. If you have two mobile phone numbers, you can have voice mail number for each mobile phone number respectively. 2、Voice Mail Number：Edit or delete your voice mail number, press confirmation to store this number. Notes： In idle mode, after voice mail number is set, press 1 key to call voice mail. 4.
messages. Read Message Lets you view the received message. Languages Allows you to select your preferred language to display cell broadcast message Channel Setting allows you to indicate the channels from which you wish to receive broadcast messages. The following options are available. 1 、 Select ： use to enable or disable channels in the list by marking or unmarking them respectively. A check mark displays in front of each selected channel. 2、Add: use to enter the ID and title for a new channel.
channel from the list. 4.6 Entertainment 4.6.1 Camera Your phone has a digital camera which also works as Video Recorder. You can take pictures, record video clips, save and view them and send them as email attachments. 1、While in standby, press left navigation key to activate the camera. 2、Press center navigation key to capture the scene. 3、After you take a picture, you can save or clear the picture by pressing the left/right soft key. 4、Press Power On/Off Key to deactivate the camera.
Camera Setting Set Camera parameters, such as Shutter Sound, EV, Banding, Delay Timer, Cont Shot Image Setting Set the size and quality of the image White Balance Adjust the picture colour to the lighting conditions.
4.6.2 Video Recorder When playing the video, press up and down navigation key to adjust focus and right/left navigation key to adjust EV. when the video is activated, press OK Key to start record, press left soft key to view more options as followings: Options Description To Play Play saved video CamCorder Setting Set Video Recorder parameters, such as White Balance, LED Highlight, EV, Night Mode ,Banding.
Restore Default Reset the Video setting to default setting 4.6.3 Audio Player The phone has a Audio player to play the music you have transferred or download to your phone. Notes: MP3 file should be saved under My Music file.
Options Description Play List Choose to play the songs saved on the Phone or in the Memory Card List Gen Whether to add the song under Music File to Audio Player Auto Skin Change the skin of player, three styles are available Repeat Whether to repeat the song playing or all the songs Shuffle Whether to play the playlist files in random order, or loop on to restart the playlist when the last file has been played Background Play Play the music as background music when you operate other function
4.6.4 Video Player The phone has a Video player to play the video you have transferred or download to your phone. Notes: MP4 file should be saved under Video file. When you playing the video, the function of keys is as follows: 1、Up: Play/Pause 2、Down：Stop 3、Left：Back 4、Right：Forward 5、Left Soft Key: Play 6、Right Soft Key: Stop Press “Option” to view the functions, such as play, forward, rename, delete, delete all files, sort and so on. 4.6.5 Image Viewer Review and set your picture.
4.6.6 Image Editor This function allows you to edit figure files by your own Options Save Save as Pen Setting Fill Background Description Save all drawn figures. Save as some record.
Purple、Violet、Grey、Light Grey、Red、Green、Yellow、 Blue、Pink、Light Blue、White Mark Select the scope of drawing Zoom Zoom in or out the selected content. Resize Set up size of the figure. Help Direction of use 4.6.7 Photo Artist Edit the picture saved on the phone or in Memory Card. 4.6.8 AB Repeater 1、Play a part of video， and 0-9 keys will displayed on the screen 2、Select the part you want to repeat through the 9 Keys 3、Return to the repeat mode, press keys to repeat any part you want. 4.6.
Make the record of the sound. You can play, rename, delete, delete all files and set the recorder. 4.6.10 Melody Compose Through this function you can make a melody by your own and set it as incoming melody. 4.6.11 Game This mobile phone provides three built-in game : F1 Race, Color Balls, Doll, Puzzle. Game Setting: 1、BGM： Turn On/Off BGM 2、Sound Effect： Turn on/off game sound. 3、Game Vibration：Turn on/off game vibration 4.6.12 Themes The phone provides “Orange, Blue and Grey” themes for you to select.
4.7 Phone Book You can store phone numbers and their corresponding names in the memory of your SIM card and your phone. Storing a Number in Idle mode As soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in the phonebook.. When you choose to save the number to the phone, there will be 6 categories for you to choose: mobile phone number, home number, Company number, office number and Fax number.
4.7.1Quick Search Enter the initial of Pinyin or initial of English word at the position designated by cursor, i.e. go to first record that meet the condition in numerous numbers, such as look for surname “Zhang”, enter “Z” into input area and can rapidly find it. 4.7.2 Search Entry Input the name to be searched, then “search” in telephone directory, find the most matched record. 4.7.
time, this incoming group function will be invalid. 4.7.4Copy All Copy SIM card or all record of mobile respectively. 4.7.5 Delete: Delete all records on SIM card or mobile phone or delete one by one. 4.7.6 Caller group Incoming ring, picture, film etc. have been set for 5 groups respectively; set up object through left and right direction. 4.7.
2、Storage Location: Select path to store current numbers. 3、Name Card Setup: Select display items recorded in mobile phone telephone directory and add display items of record interface. 4、My Name Card: Edit or transfer my name card. 5、Telephone Directory Report Name: Report Chinese name and telephone number of call records. 4.7.10Caller Picture Photo setup for incoming call 4.7.11Caller Ring Tone Ringtone setup for incoming call 4.7.12 Caller Video Movie tone setup for incoming call 4.7.
4.8.1 Calendar With the Calendar feature, you can: ~ Consult the calendar ~ Write task to keep track of your schedule and trigger an alarm if necessary（See To Do List） Consulting the Calendar When you select the Calendar menu option ， the calendar displays. The following options are available when you press the Options soft key. 1、View Tasks: View the tasks you have set 2、Jump to Date: allows you to go to a specific date. 4.8.
3、Enter your task and then press the OK soft key 4、If you want an alarm to ring on the chosen day, using the navigation Keys. 5、You can set the repeat mode, such as once, everyday, day, weekly and monthly. 4.8.4 Alarm This function allows you to set the alarm to ring at a specific time.System has set up 3 alarm clocks, default as power off, open on or all as needed. Ring time and ring date can be set up for each alarm clock.
4.8.5 Calculator With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions: addition, subtraction, multiplication and division. Using the Calculator 1、Enter the first number using the numeric keys. 2、Press the up navigation key and the required arithmetic symbol appears: + (addition), (subtraction), x (multiplication), / (division). 3、Enter the second number. 4、To calculate the result, press the OK key. 4.8.
right key. 4.8.7 Stopwatch You can use stopwatch to reckon time, and there are typical stopwatch and N-Way stopwatch for you to choose. When reckoning time, other functions of mobile phone can still be used normally.
which you can select the time group that you need to view. You can also carry out delete operation on saved records. N-Way Stopwatch： Press “upper, lower, left, right” Navigation keys to select corresponding stopwatch to reckon time. 4.8.8 Unit Converter Using this menu option, you can make Weight and Length Unit conversions. Weight Unit Converter 1、Use Left/Right Navigation Keys to transfer from Kg to Pound or Kg to Ounce.
conduct length conversion in any item and press the OK soft key. 4.8.9 Currency Converter Using this menu option, you can make currency conversions. 1、Enter the current exchange rate of your source currency and press the OK soft key. 2、Enter the amount for which you wish to conduct the currency conversion in local or foreign item and press the OK soft key. 4.9 Services 4.9.1 WAP Your phone is equipped with a WAP Browser to allow you to access and navigate the Wireless Web via your phone.
this function will be unavailable. For more information, please contact network supplier. Options Description Homepage Start up all the set websites in connection setup.
you want to use 2 、 Browse Option——Set waiting time and Whether display pictures when browse web page. 3、Service Message——select to turn on or off to receive messages from service desk. 4 、 Clear Cache: clear all temporary stored internet files saved in the phone 5、Clear Cookies: Clear history record of browsed web pages 6、Trusted Certificates：Trusted Certificates are used to verify the WAP gateway or the HTTP server that you are connecting to.
you buy it. You can also download new certificates using the browser. Notes： For relevant charge standard and detailed setup, please consult local network service operator. 4.9.2 Data Account 1、GSM Data Use GSM data to provide the following account data, for example, Telcel HS 1)Account Name：Telcel HS 2)Number：*273 3)User Name：iescsd 4)Password：wap 5)Line Type：ISDN 6)Speed： 14.4 Kbps 7) DNS：148.223.151.
2、GPRS Use GSM data to provide the following account data，for example, GPRS Telcel 1)Account Name：GPRS Telcel 2)APN：wap.itelcel.com 3) User Name: iesgprs 4) Password 5) Auth.
5 Troubleshooting Problems Possible Reason Can not turn on mobile phone Whether battery has electricity Whether battery is placed properly. SIM Card Error SIM card is dirty，clean SIM card Re-install SIM Card SIM card has been damaged ， change SIM card Poor Signal Check the indication mark of signal intensity on display screen, 5 cases of this sign represent strong signal, lower than 2 cases represent weak signal.
Phone Can Not Dial Out mobile phone number, but your network operator does not provide this service; 2 、 There may be strong interference signal in ambient; 3、You may have activated call blocking function 4、You may have activated line 2, but your network operator does not provide this service; Battery can not be charged 1、 Maybe the battery has been over discharged and it can only be charged after connected to charger for some time; 2 、 Performance of battery has worsen; Can not connect to internet 1、S
damaged.
6 RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types HG-E30 (FCC ID: SG70701HG-E30) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.416 W/kg and when properly worn on the body is 0.421 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
