D1200 User's Guide Congratulations on purchase of Haier mobile phone, which is a combination of the essence of high technology, stylish designs and functions which are practical for daily use such as alarm clock, calculator, scheduler and more. Before the use of your Haier mobile phone, please read this user's/operation guide for efficient use of the Handset.
.8 Memory Status 23 2.9 Voice Mail 23 3. Call History 24 3.1 Missed Calls 3.2 Received Calls 3.3 Dialled Calls 3.4 Erase Lists 24 3.5 Call Timers 24 24 24 24 4. Profiles 25. 4.1 Normal 25 4.2 Silent 25 4.3 Outdoor 25 4.4 Car 26 4.5 Meeting 26 5. Settings 27 5.1 Display 27 5.2 Security 27 5.3 Phone Info 28 6. Call Setup 28 6.1 Answer Call 28 6.2 Auto Answer 28 6.3 Call Waiting 28 6.4 Call Forwarding 28 6.5 Voice Privacy. 28 7. Tools 30 7.1 Schedule. 29 7.2 To Do List 29 7.3 Alarm Clock 29 7.
9.2 SMS Services 34 10. My Media 34 Ⅲ Input Method 34 Ⅳ Care and Maintenances Ⅴ Trouble shooting VI ACCESSORIES 35 38 39 Important notes Please follow the following rules before you use the phone. Otherwise, it may result in dangers or make you violate laws. Follow traffic regulations Do not use the mobile phone without hand-free settings while driving. Please stop your car before you want to use your phone.
exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
# key: In idle mode ,"#" key can use to switching from meeting mode to normal mode. Volume side key You can adjust microphone's volume using side keys directly during a call. You can adjust key tone volume in idle mode. Recording Key: If User press recording key during the call, Voice get recorded and complete after the call ends. To retrieve the Recording, click Tools→Voice Memo. 1.
Install UIM card Purchase a UIM card from network operator. Your phone number and registration information are stored in your UIM card. Your UIM card can be used in any a CDMA phone. Your number and information will not change. ﹡Make sure to switch off your phone before take out the battery. ﹡Make the metal face of the UIM card down and put it conferring the bevel of the card. ﹡Cover the sheet metal used for fixing and install the battery. Remove UIM card ﹡Remove the battery after switch off your phone.
about 3 hours for full charging. 3. Do not pull out the plug of the charger duri-ng the charging to avoid harming of the phone and charger. 1.5 Switch on/off Pressing and holding can switch on/off the phone. If you have set PIN code, please enter PIN when switch on your phone. Input PIN code You can set protection code (PIN CODE) in order to prevent random using of your phone by others. Each time you restart your phone, the phone will ask you to input PIN code after setting.
﹡Enter the country code , area code (without prefix zero) and phone number. ﹡press to dial 1.7 During a phone call After pressing key Contact Messages Mute Start Recording user can view following contents given below: Ⅱ Menu Overview Operator authorized UIM card can be used in the handset for accessing menu detailed below. If UIM card not inserted user can make SOS (emergency) calls. Note: you can also directly press 1 to 9 to select a menu in the main menu. 1.
1.6 Dial a number ﹡you can only use the function only after the network name is shown on the screen. ﹡input district code and telephone number or mobile phone number, press to dial. End a call Pressing can end a call. Redial a number You can press twice to redial the number you dial last time. The mobile phone can store 30 latest call lo-gs (incomings or outgoings).
4 Multi-Copy Allows you to copy items in the mobile phone to UIM card or to mobile phone memory. 5 Groups To set names in different groups. 6 Erase all contacts Allows you to erase all items in mobile phone and UIM card memory. 7 Speed Dial Your mobile phone can store the most 98 items in its memory for easy/quick dial. 8 Memory Status Allows you inquire the capacity of UIM card and phonebook, including used number and total capacity.
1. Input the name or the first character required. 2. According to the requirement press up/-down key to search the needed calls. Names→ Find Name→ Enter initial alphabets→OK 1.4. Multi-copy With the copy function, allows you copy ite-ms in the mobile phone entries in UIM card memory to phone memory and vice versa. All Copy: you can copy all of the UIM card memory entries to phone memory and vice versa. Choice Copy: You can select one or more of the recorded list to copy it.
3# 121-Customer Care. 1.8 Memory status Allows you inquire the status of the UI-M card and phonebook, including used number and total memories. 1.9 My number You can save his mobile number in my number menu. 2. Message You can send, receive and save the message by using message menu. 2.1 Write Message Allow user to edit text message. When composing text messages, check the number of characters allowed in the top right corner of the message.
Message→Inbox→Select Received message then press OK→Option→Reply→OK Forward: You can forward the received message to desired number. Message→Inbox→Select Received message then press OK→Option→Forward→OK Copy: You can save the received message in phone box. Message→Inbox→Select Received message then press OK→Option→Copy→OK Lock/Unlock: You can lock and unlock the message. When you select "erase all message" menu in UIM or Phone, this message won't be erased.
Allows you select Auto save or no save option. If you select 'auto save' option, if memory is not full user and save the sent and unsent messages. Message→Msg Settings→Auto Save→Auto Save/Do not Save→OK. 2.6.2 Priority With the function allow you to select Normal or emergency. Message→Msg Settings→Priority→Normal/Urgent→OK. 2.6.3 Delivery Reports Allow you select turn on or off.
call replaces the oldest. 3.1 Missed Calls You can view missed calls and also use options like save, send message etc. Call History→Missed Calls→Details/Send message/Delete/Delete All→OK. 3.2 Received calls You can view received calls and also use options like save, send message etc. Call History→Received Calls→Details/Send message/Delete/Delete All→OK. 3.3 Dialled calls You can view received calls and also use options like save, send message etc.
4.2 Silent Select profile: if you locate the needing quiet environment, you can active the silent option of the profile. Edit profile: in according to the quiet enviro-nment, you can personal setting the profile mode. 4.3 Outdoor Select profile: if you are away from home, ac-tive t to available outdoor mode Edit profile: you can create the personal set-ting under outdoor menu. Volume of the default setting is the maximum ring volume. 4.
Minute Beep When the alert for Minute Beep is on, during a phone call, as your connection nears a minute, an alert will sound 10 seconds before every minute. This is to help the user know How many minutes have gone by while they are talking (if conversation is short.) Call Connect When the alert for Call Connect is enabled, when a user has successfully connected when making a phone call, an alert will sound. Dropped Call When alert for dropped call is on. Phone sounds alert after dropped the call.
5.2 Security Security menu protect your phone from unauthorized use. Settings→Security→Enter Lock Code (preset code is 0000 )→Ok. 5.2.1 Lock phone Phone lock code controls access to Menu inside the phone. If user wants to access the phone menu need to enter the phone code (By Default is 0000 ). Settings→Security→Lock Code (preset code is 0000 )→Lock Phone→OK (Unlock, Lock, On Power on) select any of the option→OK. 5.2.2 Change code User can change the Lock Code using change code menu.
6.1 Answer call 6.1.1 Any key: Any key answer allows you to answer an incoming call by briefly pressing any key except the Power key, Volume key, and Recording key. Call Setup→Answering Call→Any Key→OK. 6.1.2 Send only: Enable answer call on pressing Send key, during incoming c a l l user can st a r t conversation by pressing only send key. 6.2 Auto answer If user got incoming call, that time call will connect automatically as per the setting explaine below: 6.2.
Call Setup→Call Forwarding→To Voicemail→All Call/When Busy/No reply(not reachable) to select any of the condition→OK→Disable/Enable →OK. Call forwarding to other numbers: Call Setup → Call Forwarding → To other numbers → All Call/When Busy/No reply(not reachable)to select any of the condition OK→Disable/Enable→Input the Number in which user wants to forward the call → Call Setup → Call Forwarding → To Voicemail → All Call/When Busy/No reply(not reachable)-to select any of the condition→OK→Disable/Enable→OK.
Batch Deletion: Using this function All done, All expired , All , To do lists can be deleted. Tools→To do list→Batch Deletion (All done, All expired , All ,) →Ok. 7.3 Alarm Clock The alarm clock is based on the phone clock. It sounds an alert any time you specify and even works if the phone is turned off. This function supports three alarm clocks and a quick speed alarm clock. Entering the alarm clock setup, press key to choose between “turn on” and “turn Off” .
key to select “starting record” on the submenu. Then begin recording new memo and the interface shows “recording” . Meanwhile “recording” changed to “stop recording ”on the sub-menu,press stop recording to stop this process. 3. Getting reply from the automatic record machine, the machine will record the message. The length of the message should be controlled within 30 seconds. If the record time exceeds 30 seconds, the machine will stop automatically. 7.4.
User can protect important information in the mobile used by others. The information includes message, names, call record, voice memo, alarm clock and scheduler. User can choose the any of the menu or all the menu for password protection, before opening the particular locked menu phone will ask for Password. Haier Feature menu item lock ok Enter lock code Ok Select any of the menu item listed option (Enable, Enable All, Disable All )→OK Note: Default menu lock code is “0000” .
10 My Media In this menu user can view downloaded images, downloaded ring tones and available memory status for wap etc. Ⅲ Input method This mobile phone used the eZi input Method. When using your mobile phone there will be many times that you will need to input text e.g. sending messages, entering names into the Phonebook, editing the greetings message, editing Browser settings, etc. There are 5 input methods: 1.Number(123):To provide input number ; 2.
■Please contact professional maintenance personnel to repair your phone if your phone and its fittings are in trouble. Use the batteries and fittings manufactured by Haier Company. The use of other fittings may cause dangerous accidents and make all guarantees null and void. Haier phone can use the following fittings: Earphones (nonstandard collocation) If you connect the earphone with the phone: To activate earphone mode. To match the volume of earphone with that of mobile phone.
Echo or noise Please move near the window if you are in a building, and move to a wild place if the signal is weak. Try to avoid 3 keep away from base station of network operator. Ask network oper-ator supply service map 4.Electromagnetic interference source nearby. Try to avoid using your phone here 1. Imperfect function line of network operator. Hang up and redial 2.
Cannot send messages The service is not available Coperator On tact network 1.The fixed dial or call restrictions has been set. Power off fixed dial or call restriction 2. Be in peak hours of using network Dial later Wrong PIN code Input wrong PIN code three times Contact network operator The battery can not be charged or do not display the charging 1. The battery or charger has been damaged. Change a new battery or charger 2. The phone temperature is below 5.