Thanks for purchasing Haier mobile phones, which are a combination of the essence of high technologies, stylish designs and a plenty of functions. They are expected to bring endless funs to your life. Before the use of Haier mobile phones, please read this users' guide and keep it carefully for further reference. This guide serves as an operation guide instead of a quality guarantee.
. Menu Introduction..............................17 1. Names...............................................17 1.1 List Contacts ...................................18 1.2 Add New ........................................ 18 1.3 Find Name ......................................19 1.4 Multicopy....................................... 19 1.5 Groups ...........................................19 1.6 Erase All Contacts...........................20 1.7 Speed Dial......................................
7. Tools ...............................................30 7.1 Schedule....................................... 30 7.2 To Do List........................................30 7.3 Alarm Clock....................................30 6. Call Setup .........................................29 6.1 Answer Call .................................... 29 6.2 Auto Answer....................................29 6.3 Call Waiting....................................29 6.4 Call Forwarding...............................29 6.
1 Follow traffic regulations Do not use the mobile phone without handfree settings while driving. Please stop your car before you want to use your phone. Switch off your phone at filling stations Do not use your phone at filling stations or the areas with inflammables and explosive products or chemicals. Switch off your phone on the plane Mobile phones will cause interference. Using mobile phones on the plane is both a danger and a violation of laws.
2
3
4
5
6
7 This device is not intended for use while being worn on the body.
.
9 While there may be differences between the SAR levels of various phones and at various positions. they all meet the government requirement for safe exposure. The FCC has granted and Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the display Grant section of http://www.fcc.
Front close picture OK Key i Keypad Up Key Names Key Right Key Power /Hang up Key Down Key Display Receiver Charging connector Front Open View Microphone Menu Key Volume Keys Up Left Key Volume Keys Down Send Key Antenna .
11 1.1 Keypad Power /hang up key The red key on top right corner of the keypad is power key. Press and hold the key can switch on/off the mobile phone. Pressing the key can end a call during a phone call or reject to answer a phone call. Pressing the key in the menu can also return to the idle mode. Send key The green key on top left corner of the keypad is send key. You can dial or answer a call with the key.
Alarm clock That indicates function that the alarm clock Message The icon is displayed when a new message arrives. The icon disappears when you read all the unread messages. Explanations of icons Battery icon Display electric charges of the battery. The more bars it displays, the more remaining charges it has. 1.2 Idle mode screen Volume side key You can adjust microphone's volume using side keys directly during a call. You can adjust key tone volume in idle mode.
13 Install the battery New messages When a new message arrives, the screen will prompt it in idle mode. Press navigation key to read the message and then press key for options operation. Press the key to return to the idle mode. 1.3 Install battery and UIM card Install the battery aim the protruding part at the bottom of the battery at the groove of phone. push the top part of the battery to the phone and press down the lock until it is locked.
UIM CARD UIM CARD Take out the UIM card UIM CARD Installing the UIM card UIM CARD phone. uncover the sheet metal and take out the UIM card. install the battery. 14 1.4 Charge battery Connect the charger with power supply. Insert the plug of the charger into charging connector of the bottom of the phone. The scrolling of the electric quantity bar indicates that the phone begins to charge. When the battery level full and stop scrolling to displays charging finishes.
15 Input PIN code You can set protection code (PIN CODE) in order to prevent random using of your phone by others. Each time you restart your phone, the phone will ask you to input PIN code after 1.5 Switch on/off Pressing and holding can switch on/off the phone. If you have set PIN code, please enter PIN when switch on your phone. Notes: 1. Press and hold the buttons of both sides of the charger after the charging to plug out the charger. 2.
can end a call. Redial a number You can press twice to redial the number you dial last time. The mobile phone can store 30 latest call logs (incomings or outgoings). In order to redial one of the numbers, you can do as the followings: 1 if characters are shown on the screen presses to return to the idle mode. 2 press to display the latest call list. End a call Pressing 1.6 Dial a number you can only use the function only after the network name is shown on the screen.
MENU INTRODUCTIONS 1. Names Allows you to store the often-used numbers into UIM card or the mobile phone and at the same time supply you with search, add group, store, and erase and memory capacity. 17 Note: you can also directly press 1 to 9 to select a menu in the main menu. NOTE : Only when an effective UIM card is inserted can you normally use the menus below.
1.1List Contacts You can use this function to search records to dial directly, and to execute erase, copy, IP dial, send message, edit and erase operation. Press key to enter View all function. If you need to browse phonebook information, input the alignment characters (e.g. a, b), your mobile phone will attempt to match the characters with names in your Phonebook. If you search the stored phone numbers, preferred number display in the screen and you can press key to call this number.
19 addresses and one remark message in your phone. There are including one name and a number in UIM card. Then to select add in a list into UIM card or phone. Notice: press # key to change input methods during input name. 1.3 Find Name To find name required. 1. Input the name or the first character required. 2. In according to the requirement press up/down key to search the needed calls. 1.4.
the group information may be losing efficacy during incoming call. You can use two ways to prevent it: 1. Erase the same number thereof haven't allocated group. 2. You can use the same number to record the same groups. 1.6 Erase all contacts This feature allows a complete erase of all contacts either in UIM card memory or Phone memory; the information thus deleted is unrecoverable. If you set protection code, before you clear all the records each time, you need to input the protection code. 1.
21 2.1.2 Templates You can insert templates when composing an SMS message. Press key to select the quick text you needed. ers.There s a popup message to prompt the length is over 160 characters Text is Full. Allows you write text letter, the number at the top right corner show character number for enable input. Press number key to input letter you need. Press key (option) as following actions: 2.1.1 Send You can send a message. Pressing to select object you want to insert your SMS message.
You can save the contents of edited to outbox. 2.2Inbox 2.2.1 Inbox When you receive a new message, the new message-prompting icon will be displayed on the screen, to view messages in the Inbox. Press up/down key to scroll and then choose either SMS messages to view. While you view the message press to enter the following options: Reply: you can reply the selected message. If you wand to reply the message, press key to entry the Edit Interface. Press key to send the message after finished it.
23 2.3.1 Outbox Your mobile phone will store messages in outbox list. Select a message, press key to scroll the desired option press to view the details of the messages and press to open a message and to enter the following options as the 2.2.1: forward, save address, copy to phone box and erase. 2.4 Sent Messages To save the message from UIM card to the phone box, the saved all messages are displayed in phone box.
message you sent, if you select turn on, the information that you have successfully sent the message is displayed through network. Notice: the network determines whither this function is affective or not. 2.6.4 Storage Device You can select storage device in which the sms can be stored in UIM card or phone device. 2.7 Erase message You can erase message stored in the inbox, outbox and phone box folder. To erase the entire message or erase the entire message stored in the phone and UIM card text.
25 3 call History With this function list you can select the recent calls menu, you can view 30 number in the missed, received call, and dialed call menus. Also, you can view displayed of each call times. 3.1 Missed Call With the function, you can view the current missed calls (no more than 30 messages). You can save and view this saved number and also to send the message and dialing to the selected number. Please refer to the submenu of the recent calls. 3.
4 Profiles The profiles function provides a quick and convenient way to reset your mobile phone setting for a particular environment (e.g. to set your mobile to not ring when you are in a meeting, or increase the volume of the 3.5.1 Last call Your phone displays the last call times. Display the time used by the last call. 3.5.2 Received call Display the time used by the last call. 3.5.3 Dialed calls Display total time used by all outgoing calls since the timer was reset. 3.5.
27 ting under outdoor menu. Volume of the default setting is the maximum ring volume. 4.4 Car Select profile: if you are driving, you can set to the car mode immediately. Edit profile: in according to the outside environment, you can personal setting the profile mode. 4.5 Meeting Select profile: if you hold a meeting, you can set to a meeting mode of the profile. Edit profile: in according to the meeting environment, you can personal setting the profile mode. The default setting is the vibrate mode.
5. Settings 5.1 Display 5.1.1Banner: You can edit the banner in idle mode. 5.1.2Backlight: This function allows you to set up the timer and, as well as, adjust the backlight settings. 5.1.3 Screens: allow you to select the wallpaper pictures. 5.1.4 Menu style: you can select different style of the function. 5.1.5 Theme colors allow you to select keypad background light color. 5.1.6 Language Allows you set the displayed languages. 5.1.7 Contrast you can adjust LCD contrast from 0~9 level. 5.
29 6 Call setup The function supplies you with sets related to calls. 6.1 Answer call 6.1.1 Flip open: Flip on can answer a call without pressing answering key after selecting the function. 6.1.2 Any key : press and hold the keys except power key and side key can answer a call after selecting the function. 6.1.3 Send only: press to answer a call Disable PIN: If you close the security option, you must entry the PIN number and the screen will indicate 'are closed'. Change PIN: allows you change PIN number.
7 Tools 7.1 Schedule This function only can be used when the system time has been set. When you entering the schedule interface, there will appear a calendar. The first row of the calendar shows the year and the month; the second row of the calendar shows days from Sunday to Saturday in order; in the middle is the calendar watch; the number in the small black square is the current selective date; the row next to the last shows the selective month and day in lunar calendar. 7.1.
31 Entering the alarm clock setup, press key to choose between turn on and turn off . Press different times to confirm different tasks, at last set the alarm tone. Press left soft key to clew success save . The quick speed alarm clock can set different alarm times after 30 minutes , after one hour , after three hours . The alarm cannot be used when the mobile is power off. 7.4 Voice Memo 7.4.1 Memo List The record function can be used under the non-call condition.
recorded while making a call. Methods of add a record while making a call 1. While making a call, press the record key in order to record a new item. The interface of the mobile shows recording . Press the record key again to stop recording. 2. While you make a call press the left soft key to select starting record on the sub-menu. Then begin recording new item and the interface shows recording . Meanwhile recording changed to stop recording on the sub-menu., use stop recording to stop this process. 3.
33 results made by this calculator only used as reference. 7.6 World Clock You can look over different times of different cities in the world. Press key to look over the time. Press key to save the current city time for the next search in convenience. Press key to exit this menu. 7.7 Stop watch Entering the stopwatch interface, press key to start timing and press key to record one item. 9 items can be saved at best. Press key to stop timing. Press key to look over the former records.
the password for those functions at one time or set the password only for some of the functions. If you use the password for some of the functions, you should input the correct password when you using those functions, otherwise you do not have the right to use those functions. 8.2 Incoming Call Guard This kind of function supplies a simple way to protect you from the annoying telephone. Notice: only your mobile can show the incoming numbers, can this function be used. 8.2.
35 Input method This mobile phone used the eZi input method. When using your mobile phone there will be many times that you will need to input text e.g. sending messages, entering names into the Phonebook, editing the greetings message, editing Browser settings, etc. page. Press key to end the operation. Notice: every time when you log on the Internet, the interface will show the page of the former time. 9.2 UIM Tools Only your R-UIM card supports this kind of function, you can use it.
pasting mode using "#" key, there will be a cursor on the text.Move to the strat point ,press "1" and continue move the cursor to the end point you wanted,at this time, the choiced text will display as a particular color, press "2" then end copy process. The paste step described as:When reaching at a writeable text page such as writing sms status,pressing "#". Mode switch Under the input mode press # key enter to switch the input mode.
37 Do not use or store your phone in low temperature place. When it comes back to normal temperature, the moisture will coagulate in the phone and cause the damages of circuit board. Do not open your phone by yourself, as non-professional disposal may damage the phone. Please avoid throwing; knocking and shaking your phone, improper external frce may result in the damage of inner crcuit. Do not use chemical solvents or detergent to clean your phone.
the original traveling charger. Inserting it into span of table mode charger that it connects with the plug of mobile phone, the green light of the indicator light is on; put battery into table mode charger, the red light of indicator light is on, it is charging normal; after definite time the green light is on show the battery completely. Batteries * Use the batteries specified by the manufactures.
39 AbnorMeans of settlemal cir- Trouble reasons ment cumstance Bad si- 1.Using mobile ph- Please move near gnals one in bad signal the window if you or drop area, such as near are in a building, the line the high building or and move to a wild in the basement. place if the signal is weak. 2. In call rush hou- Try to avoid r. The line is stuffed so you cannot make a call. 3 keep away from Ask network operbase station of ne- ator supply service map. twork operator.
3. Unclean UIM card contact. Wipe the touching point with a clean cloth. 4. The mobile pho- Move to a nice ne will launch con- signal area or tinuously and sea- power off temrch base station porarily. when not receive signals. Mass consuming of electric quantity shorten the waiting time. The pho- 1. No battery or the Charger the batne cannot battery is not inst- tery or install the battery correctly. be started alled well. 2.
41 The batt- 1. The battery or Change a new ery can- charger has been battery or charnot be damaged. ger charged 2.The phone temp- Adjust charging or do not erature is below environment display 5 or above 40 . the char- 3. Bad contact Check if the chging arger contact has connected well. 4. Not enough cha-Wait for a momrger last time ent or pull out the plug and try again. Some fu- The network operContact network nctions ator does not supoperator. cannot be ply this function. set Power off 1.
