User Manual

ManualsBrandsHAICOM Electronics ManualsElectronicsGPS/GSM Tracking Device - Decoder Unit

Just like you call someone and he tells you where the object is

and shows you where he is on the mapping software. HI-601VT

provide non-stop and continue real time tracking without time

limitation. Just like you talk to someone over the phone as long

as you can.

HI-601VT

Summary of content (4 pages)

PAGE 1
HI-601VT 3 Just like you call someone and he tells you where the object is and shows you where he is on the mapping software. HI-601VT provide non-stop and continue real time tracking without time limitation. Just like you talk to someone over the phone as long as you can.
PAGE 2
4 Step by Step operation explanations: 1. Switch power on HI-601VT main unit. 2. The GPS receiver module in HI-601VT start receive GPS satellite signal (The GPS LED blinking means the GPS is in 3D fixed and the data is valid) 3. The GSM module starts sending the GPS data via GSM network back to the host side (The GSM LED blinking means the GSM network stand by and stay on means the GSM connected with some host) 4. Dial the Telephone number from the host side to the HI601VT main unit.
PAGE 3
HI-601VT 5 5. Switch on HI-601VT decoder (Switch on the middle for data out via wired connection and to the most right side for wireless Bluetooth connection) 6. Connect the voice jack cable to the voice outlet from the phone. 7. The HI-601VT A/D decoder start to decoding the Analog GPS voice message into real-time GPS digital NMEA message. 8. On the decoder unit, connect the PS/II output cable or set up Bluetooh connection to the display unit (such as smart phone, PDA, laptopPC, desktopPC, etc.) 9.
PAGE 4
HI-601VT main unit 6 overview Alarm release SOS panic button Connector for data control output and power in Mini1394 connector GPS status LED for GPS data output and power in GPS MMCX external GSM status LED antenna plug Power status LED Power ON/OFF 6