Mounting instructions Technical information All safes are supplied in the basic method of operation. In this method of operation, locking authorisations can be allocated to personnel keys directly at the safe with a special programming key stick (green). The locking authorisations are withdrawn again directly at the safe with a clearing key stick (red). Guest keys are authorised via the software Hotel. The configuration takes place when the system is initiated.
Mounting instructions Supply schedule l l l l safe safe TM4: removable shelf (sheet steel) four Mignon-1,5-V-batteries (already inserted) battery holder TRE emergency power supply Installation The safe is designed for installation into furniture. 1 2 3 ca. 1,2 m 1 2 3 10 end plate (19 mm thick) safe base plate (35 to 40 mm thick) engl.
Mounting instructions 173 128 248 280 318 29 Built-in dimensions of safe TM3 278 170 295 300 29 398 Built-in dimensions of safe TM4 1. Glue and screw fix the base plate to the side panels of the cabinet at approx. 1.2 m above the cabinet base. 2. Glue and screw fix the end plate to the side panels of the cabinet above the base plate. 3. Insert the safe. Screw fix the safe in the cabinet 1.
Mounting instructions Initiation Allocation of programming and clearing key stick In the basic method of operation, the programming and clearing key sticks must be allocated during the first initiation. Avoid misuse of the electronic keys by unauthorised persons: keep the programming and clearing key sticks in a safe place, as these will allow allocation of locking authorisations to an electronic key. 1. Have the green programming key stick and the red clearing key stick ready. 2.
Mounting instructions Brief operating instructions for the basic method of operation Allocation of locking authorisations to a personnel key 1. Push the white button on the display. The red indicator (LED) is illuminated. 2. Hold the green programming key stick in front of the display. The green indicator (LED) flashes. 3. Hold the personnel key to be allocated in front of the display within 5 seconds. The green indicator (LED) is illuminated briefly.
Mounting instructions 2. Hold the red clearing key stick in front of the display. The red indicator (LED) flashes.. 3. Hold the green programming key stick in front of the display. The red indicator (LED) is illuminated briefly. The locking authorisations are withdrawn. 4. Re-allocate locking authorisations to all personnel keys, which need to retain these. Change of batteries When the batteries are weak, the red and green indicators (LED) flash alternately once the safe is switched on.
Mounting instructions Operation Guest keys are allocated automatically, when locking the safe for the first time. Up to four guest keys can be allocated per safe. Locking of the safe 1. Close the safe door. 2. Push the white button on the display. The green indicator (LED) is illuminated. 3. Hold the electronic key in front of the safe. The green and the red indicators (LED) flash alternately and the bolts move audibly. The red indicator (LED) is illuminated. The safe is locked. Opening of the safe 1.
Montaganleitung 732.29.108 Der Nachdruck der Montageanleitung, auch auszugsweise, oder die Nachahmung der Abbildungen und Zeichnungen sowie die Nachahmung der Gestaltung sind verboten. Für Druckfehler und Irrtümer, die bei der Erstellung der Montageanleitung unterlaufen sind, ist jede Haftung ausgeschlossen. Liefermöglichkeiten und technische Änderungen vorbehalten. Stand 06.00 Mounting instructions 732.29.