Tall Wide Bookcase Assembly Instructions - Please keep for future reference 609/1013 609/2074 609/2122 609/2524 609/3561 610/9503 610/9510 610/9527 Dimensions Width - 78cm Depth - 20.1cm Height - 180.
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. rom the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting. • Do not stand on the product, this could cause damage. • Assemble the item as close to room) as possible.
Components - Panels If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the panels listed below 1 Fixed panel x 2 (74.9 x 19.4cm) (Two sides foiled) 2 Bottom panel (74.9 x 19.4cm) (One side foiled) Pilot holes for guidance only 7 Top back panel (80.8 x 76.8cm) 3 Shelf x 4 (74.9 x 19.4cm) 4 Front panel (74.9 x 5.9cm) Pilot holes for guidance only 8 Bottom back panel (92.4 x 76.8cm) Finished front edge 5 Right side panel (180 x 19.
Components - Fittings Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required.
Assembly Instructions Step 1 Attaching bottom panel B Use Plastic supports A B B Front panel 4 onto the Bottom panel 2 . B B 4 A A A A B 2 B B B back edge Step 2 Attaching side panels D Left side panel 6 and Right side panel 5 onto the Bottom panel 2 and Fixed panels 1 .
Assembly Instructions Step 3 Fixing back panels a: a: G Top back panel 7 and Bottom back panel 8 onto the unit. G Note: Use Nail guide K to keep a constant distance from the edge. K 7 Important: The cabinet MUST be ‘square’ when the back is attached.
Assembly Instructions Step 4 a: H H Attaching shelves With help, carefully stand bookcase upright. E F E + F Warning: The bookcase is heavy. Lift with care. H H H H a: SIide support covers E onto Shelf supports F . lnsert Shelf supports F (Support covers E are included) into the unit. H H H before inserting the Shelves. H Note: Set the shelf supports to the desired height. Use Screw covers H to cover the Screw heads. b: Slide the Shelves H H b: 3 into the unit.
Assembly Instructions Step 5 Fixing to wall It is recommended that the Note: Wall plugs supplied are for solid wall only. B J I I wall be used for your wall, seek professional advice if in doubt I I J B strap I onto the top panel. With help, move bookcase into position. Warning: The bookcase is heavy. Lift with care. Top panel Back panel remove bookcase . Drill a hole and insert Wall plug J . Warning: Before drilling, check wall for hidden pipes and and cables. Reposition bookcase Screw I .
A Guide to - Wall Mounting & Fixings Important note: If plastic wall plugs are supplied with your product: Important: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.