GV Bookcase 609/1295 Assembly Instructions - Please keep for future reference 609/2115 609/3523 Dimensions Width - 65cm Depth - 16.5cm Height - 82.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • During assembly do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible.
Components - Panels If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the panels listed below Finished front edge 1 Top panel (61.8 x 15.8cm) 5 Right side panel (82.3 x 16cm) Pilot holes for guidance only 2 Bottom panel (61.8 x 15.8cm) 6 Left side panel (82.3 x 16cm) Finished front edge 3 Shelf x 2 (61.8 x 15.8cm) Pilot holes for guidance only 4 Front panel (61.8 x 5.9cm) 7 Back panel (76.2 x 64.
Components - Fittings Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required.
Assembly Instructions Step 1 Attaching bottom panel B B Use Plastic supports A B Front panel 4 onto the Bottom panel 2 . A B B B B B B A B A B A 2 A 4 back edge Step 2 Attaching side panels D D Left side panel 6 and Right side panel 5 onto the Bottom panel 2 and Top panel 1 .
Assembly Instructions Step 3 Fixing back panel Attach Back panel 7 onto the unit using Nails I . I back surface Important: The unit MUST be ‘square’ when back is attached.
Assembly Instructions Step 4 Fixing to wall Warning: In order to prevent overturning, this product must be used with the wall attachment device provided. Note: Wall plugs supplied are for solid wall only. be used for your wall, seek professional advice if in doubt G B G B strap G onto the unit. wall C G G C Top panel With help, move this product into position. Warning: This product is heavy. Lift with care. Back panel remove this product. Drill a hole and insert Wall plug C .
Assembly Instructions Step 5 a: F E Attaching shelves H H With help, carefully stand this product upright. Warning: This product is heavy. Lift with care. a: SIide Support covers E H E + F H onto Shelf supports F . lnsert Shelf supports F (Support covers E are included) into the unit. H before inserting the Shelves. Note: Set the shelf supports to the desired height. Use Screw covers H to cover the screw heads. H H b: Slide the Shelves 3 into this product.
A Guide to - Wall Mounting & Fixings Important note: If plastic wall plugs are supplied with your product: Important: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.