User’s Manual Bluetooth Adapter (Bluetooth adapter for a glucometer) BA-100
USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
Welcome l Thank you for purchasing Bluetooth adapter (BA-100). l The Bluetooth adapter is a data transmitter that receives data from a glucometer and sends the data to other devices such as a mobile phone, a gateway, etc. via Bluetooth. l The Bluetooth adapter can be connected to Johnson and Johnson’s One Touch Ultra, One Touch Ultra 2, and One Touch Mini. l The Bluetooth adapter can send data to MobiCliniQ software made by Aerotel on Nokia 2720 mobile phone or compatible devices.
Descriptions ① Body ② Cable ③ Connector: Connector to a glucometer ④ Button: A button used for Bluetooth pairing and manual transmission ⑤ LED: 2-color(Green and Red) LED ⑥ Dry cell cover: Cover below which dry cells are put 4
⑦ Label 5
How to Use 1. [Preparation] l Insert batteries. Open the cell cover to place AAA 1.5V 2 EA while checking the polarity (+,) and then close the cover. l Connect the cable to a glucometer l The Bluetooth adapter is usually provided with a compatible glucometer and a Nokia 2720 mobile phone with MobiCliniQ software. If you are not provided with the glucometer or the mobile phone, please contact the service provider or customer service. 2.
l Bluetooth pairing with Nokia 2720. l [BA-100] Press the button for more than 3 seconds. l [BA-100] Confirm that the red LED is ON. l [Nokia 2720] Go to “Bluetooth menu → Paired devices.” Select “Add new device” for searching for the Bluetooth adapter. l [Nokia 2720] Find a device name, “AMC_JandJ” l [Nokia 2720] “Add” AMC_JandJ for pairing. l [Nokia 2710] Input “1234” for the passcode. l [BA-100] After a while, the green LED turns ON. l [BA-100] After a while, the red LED turns ON.
Troubleshooting l If you have some troubles in data transmission, please check the below l Try to do “Manual transmission” by pressing the button while a glcuometer and the adapter are being connected. l Replace batteries with new ones. l Try to do Bluetooth pairing.
Cautions l Be sure to carefully read the user’s manual before use. l Only one glucometer of a certain patient should be used for one Bluetooth adapter. If you should change the glucometer, then first do manual transmission by pressing the button, change the glucomter, and do manual transmission once more. l Keep connections between the Bluetooth adapter and the glucometer. l After Bluetooth pairing, do manual transmission.
Specification l Function: it automatically receives blood glucose data measured from a glucometer and transmits to a pre-determined device via Bluetooth. l Usable devices: Johnson and Johnson’s One Touch Ultra, One Touch Ultra2, One Touch Mini, and compatible devices. l Bluetooth 2.0 Class 2 l Power supply: Dry cells AAA 2 EA l Size: 70 × 47 × 16 mm l Weight (other than the batteries): 28 g Customer service Advanced Monitored Caregiving, Inc. (U.S.) Phone: +1-212-422-3037 E-Mail: info@AMChealth.